Since commit 44e7f029
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Introduced in GLib 2.10.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

I opted to alias the 'virDomainType' to 'virshDomain' so that it's
obvious in all cases that this is a virsh-only construct. This is also
somewhat consistent with virsh's use of 'virshDomainFree' wrapper for
the freeing function which actually accepts NULL.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart.  Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves').  Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.

Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.

Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.

Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.

Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.

The syntax-check rule will prohibit new uses of virDomainFree.

Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.

Don't accumulate helpers in virsh.c

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Another worthwhile split, needed one more public function.

* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.

The splits are getting easier, with fewer cleanups needed in virsh.h.

* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.

* cfg.mk: Whitelist virsh.h instead of virsh.c for strcasecmp check
* tools/virsh-domain.h, tools/virsh.h: Fix #define indentation

The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions.  The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.

* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user.  Use header.

There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.

The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.

Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.

To assist people in verifying that their host is operating in an
optimal manner, provide a 'virt-host-validate' command. For each
type of hypervisor, it will check any pre-requisites, or other
good recommendations and report what's working & what is not.

eg

  # virt-host-validate
  QEMU: Checking for device /dev/kvm                                         : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization)
  QEMU: Checking for device /dev/vhost                                       : WARN (Load the 'vhost_net' module to improve performance of virtio networking)
  QEMU: Checking for device /dev/net/tun                                     : PASS
   LXC: Checking for Linux >= 2.6.26                                         : PASS

This warns people if they have vmx/svm, but don't have /dev/kvm. It
also warns about missing /dev/vhost net.

Don't require dlopen, but link to ole32 and oleaut32 on Windows.

Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.

Get the VirtualBox version from the registry.

Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.

Replace 'method' with 'function' and get the filename's suffix right.

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

This stops libvirt from probing for a libvirtd on the ESX server and
sets the base for the implementation of the secondary drivers.

* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags

* src/internal.h: move xstrol() variants from here ...

* src/util.[ch]: ... to here and rename to virStrToLong()

* src/libvirt_sym.version: export __virStrToLong_i() for
virsh and qemud.

* src/nodeinfo.c, src/stats_linux.c, src/virsh.c,
  src/xend_internal.c, qemud/qemud.c: replace xstrtol()
calls with virStrToLong()

* src/nodeinfo.h: don't include internal.h, which was only
needed for xstrtol(), but instead include libvirt.h which
is suffificient for the declarations in the header.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel