If mlock is required either due to use of VFIO hostdevs or due to the
fact that it's enabled it needs to be tweaked prior to adding new memory
or after removing a module. Add a helper to determine when it's
necessary and reuse it both on hotplug and hotunplug.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491

New function qemuDomainGetMlockLimitBytes will now handle the
calculation so that it unifies the logic to one place and allows later
reuse.

We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: NIshmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far we have the following pattern occurring over and over
again:

  if (!vm->persistent)
      qemuDomainRemoveInactive(driver, vm);

It's safe to put the check into the function and save some LoC.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I initially added this in order to keep the code more error-prone to
following additions, but it seems it's still frowned upon.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Now that virQEMUDriverCreateXMLConf is never called with NULL
(after 086f37e9) we can safely drop useless check in
qemuDomainDeviceDefPostParse as we are guaranteed to be always
called with the driver initialized. Therefore checking if driver
is NULL makes no sense. Moreover, if we mix it with direct driver
dereference. And after that, we are sure that nor @cfg will be
NULL, therefore we can drop checks for that too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:

qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized

Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.

For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006

Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.

Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.

The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.

The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.

In summary this patch should have no functional impact at this point.

The name of the variable was misleading. Rename it and it's setting
accessor before other fixes.

Extract the size determination into a separate function and reuse it
across the memory device alignment functions. Since later we will need
to decide the alignment size according to architecture let's pass def to
the functions.

Add a simple helper so that the code doesn't have to rewrite the same
condition multiple times.

Since test suite now correctly creates capabilities cache, the hack is not
needed any more.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1159219Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far this function was not kept in sync with changing
virDomainDiskDef. Fill in all the missing checks and reorganize
their order so it's easier to track which items are not being
checked for.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed.  I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This new private API should return true iff sources of two disks
differs in sense that qemu should be instructed to change the
disk backend. For instance, ejecting a CDROM is such case, or
pointing disk into a different ISO location, and so on.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Every single call to qemuDomainEventQueue() uses the following pattern:

    if (event)
        qemuDomainEventQueue(driver, event);

Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.

Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.

Rather than have different usages of STR function in order to determine
whether the domain is s390-ccw or s390-ccw-virtio, make a single API
which will check the machine.os prefix. Then use the function.

We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.).  The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The numad hint stored in priv->autoNodeset is information that gets lost
during daemon restart.  And because we would like to use that
information in the future, we also need to save it in the status XML.
For the sake of tests, we need to initialize nnumaCell_max to some
value, so that the restoration doesn't fail in our test suite.  There is
no need to fill in the actual numa cell data since the recalculating
function virCapabilitiesGetCpusForNodemask() will not fail, it will just
skip filling the data in the bitmap which we don't use in tests anyway.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This needs a reorder of XML option definitions.  It might come in handy
one day.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When parsing private domain data, there are two paths that are flawed.
They are both error paths, just from different parts of the function.
One of them can call free() on an uninitialized pointer.  Initialization
to NULL is enough here.  The other one is a bit trickier to explain, but
as easy as the first one to fix.  We create capabilities, parse them and
then assign them into the private data pointer inside the domain object.
If, however, we get to fail from now on, the error path calls unrefs the
capabilities and then, when the domain object is being cleaned,
qemuDomainObjPrivateFree() tries to unref them as well.  That causes a
segfault.  Settin the pointer to NULL upon successful addition to the
private data is enough.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit e8d55172 updated the domain post-parse to automatically add
pcie-root et al for certain ARM "virt" machinetypes, but didn't update
the function qemuDomainSupportsPCI() which is called later on when we
are auto-assigning PCI addresses and default settings for the PCI
controller <model> and <target> attributes. The result was that PCI
addresses weren't assigned, and the controllers didn't have their
attribute default values set, leading to an error when the domain was
started, e.g.:

  internal error: autogenerated dmi-to-pci-bridge options not set

This patch adds the same check made in the earlier patch to
qemuDomainSupportsPCI(), so that PCI address auto-assignment and
target/model default values will be set.

While reviewing e8d55172 I've noticed a few unaligned lines.
Fix this.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Here we assume that if qemu supports generic PCI host controller,
it is a part of virt machine and can be used for adding PCI devices.

In qemu this is actually a PCIe bus, so we also declare multibus
capability so that 0'th bus is specified to qemu correctly as 'pcie.0'
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code.  And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed.  So
instead, lock it right back for qemu for now.  All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().

The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards.  Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since QEMU commit ea96bc6 [1]:
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
the floppy controller is no longer implicit.

Specify it explicitly on the command line if the machine type version
is 2.4 or later.

Note that libvirt's floppy drives do not result in QEMU implying the
controller, because libvirt uses if=none instead of if=floppy.

https://bugzilla.redhat.com/show_bug.cgi?id=1227880

[1] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=ea96bc6

When use setvcpus command with --guest option to a offline vm,
we will get error:

 # virsh setvcpus test3 1 --guest
 error: Guest agent is not responding: QEMU guest agent is not connected

However guest is not running, agent status could not be connected.
In this case, report domain is not running will be better than agent is
not connected. Move the guest status check more early to output error to
point out guest status is not right.

Also from the logic, a running vm is a basic requirement to use
agent, we cannot use agent if vm is not running.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Using a custom device tree image may cause unexpected behavior in
architectures that use this approach to detect platform devices. Since
usually the device tree is generated by qemu and thus it's not normally
used let's taint VMs using it to make it obvious as a possible source of
problems.

The code which generates paths for UNIX socket blindly used target name
without checking if it was set. Thus for the following device XML

    <channel type='unix'>
      <source mode='bind'/>
      <target type='virtio'/>
    </channel>

we would generate "/var/lib/libvirt/qemu/channel/target/NAME.(null)"
path which works but is not really correct. Let's not use the
".target_name" suffix at all if target name is not set.

https://bugzilla.redhat.com/show_bug.cgi?id=1226854Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To avoid polling for asyncAbort flag changes.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When libvirtd is restarted during migration, we properly cancel the
ongoing migration (unless it managed to almost finished before the
restart). But if we were also migrating storage using NBD, we would
completely forget about the running disk mirrors.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.

In qemuDomainUpdateCurrentMemorySize I misplaced the actual update of
the balloon size to a place where it may not be initialized. Move it a
few lines above.

When qemu does not support the balloon event the current memory size
needs to be queried. Since there are two places that implement the same
logic, split it out into a function and reuse.