https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

<interface type='user'>
  <mac address='52:54:56:5a:5c:5e'/>
  <model type='virtio'/>
  <driver iommu='on' ats='on'/>
</interface>

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Add a new iotlb attribute to the iommu device
to control the device IOTLB support for intel-iommu.

https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add an attribute to control extended interrupt mode.

https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Add a new attribute to control the caching mode.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005

Add a new attribute to control interrupt remapping.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005

Add a new <ioapic> element with a driver attribute.

Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.

https://bugzilla.redhat.com/show_bug.cgi?id=1427005

... with VIR_NET_GENERATED_MACV???_PREFIX, which is defined in
util/virnetdevmacvlan.h.

Since VIR_NET_GENERATED_PREFIX is used for plain tap devices, it is
renamed to VIR_NET_GENERATED_TAP_PREFIX and moved to virnetdev.h

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Acked-by: NAndrea Bolognani <abologna@redhat.com>

We are currently parsing only rx/frames/max because that's the only
value that makes sense for us.  The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>.  And in
those cases the guest can modify the settings itself.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

So far there is probably no change that is allowed to be done
by the VIR_DOMAIN_DEF_PARSE_ABI_UPDATE flag that would break
guest ABI but this may change in the future.

This introduces new VIR_DOMAIN_DEF_PARSE_ABI_UPDATE_MIGRATION
which should be used only for ABI updates that are "safe" for
persistent migration.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.

So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.

The resulting device XML:
<devices>
  <hostdev mode='subsystem' type='mdev' model='vfio-pci'>
    <source>
      <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
    </source>
  </hostdev>
</devices>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.

Make the new device available to libvirt users.

For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.

Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.

At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:

    <memory model='nvdimm'>
      <source>
        <path>/tmp/nvdimm</path>
      </source>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0'/>
    </memory>

So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.

For more info on NVDIMM visit the following web page:

    http://pmem.io/Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:

 - Introducr 'gop' video device type
 - Add capabilities probing for the 'fbuf' device that's
   responsible for graphics
 - Update command builder routines to let users configure
   domain's VNC via gop graphics.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add a new attribute 'rendernode' to <gl> spice element.

Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)

New xml elements:
<memoryBacking>
  <source type="file|anonymous"/>
  <access mode="shared|private"/>
  <allocation mode="immediate|ondemand"/>
</memoryBacking>

That function sets disk->blkdeviotune sensibly.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function will be needed by the QEMU driver in an upcoming
patch. Additionally, removed a useless empty line.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

We need extra state variable to distinguish between autogenerated
and user defined cases after auto generation is done.

So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add support to read/parse the iotune group setting for qemu.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When virt-aa-helper parses xml content it can fail on security labels.

It fails by requiring to parse active domain content on seclabels that
are not yet filled in.

Testcase with virt-aa-helper on a minimal xml:
 $ cat << EOF > /tmp/test.xml
<domain type='kvm'>
    <name>test-seclabel</name>
    <uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
    <memory unit='KiB'>1</memory>
    <os><type arch='x86_64'>hvm</type></os>
    <seclabel type='dynamic' model='apparmor' relabel='yes'/>
    <seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
 $ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
   -u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml

Current Result:
 virt-aa-helper: error: could not parse XML
 virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>

We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest.  But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target?  Create a new hostdev subsys type that will
carry this.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>

The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the default one now, new ones will be added in following commits.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add support for a duration/length for the bps/iops and friends.

Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length

Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.

The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.

That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the union has only one member so remove that union.  If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

For some reason the values of memballoon model are set using an
anonymous enum, making it impossible to perform nice tricks like
demanding there are cases for all possible values in a switch. This
patch turns the anonymous enum into virDomainMemballoonModel.