NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
          <alignsize unit='MiB'>2</alignsize>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
      </target>
  </memory>
  ...
</devices>
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Before launching a SEV guest we take the base64-encoded guest owner's
data specified in launchSecurity and create files with the same content
under /var/lib/libvirt/qemu/<domain>. The reason for this is that we
need to pass these files on to QEMU which then uses them to communicate
with the SEV firmware, except when it doesn't have permissions to open
those files since we don't relabel them.

https://bugzilla.redhat.com/show_bug.cgi?id=1658112Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Since SEV operates on a per domain basis, it's very likely that all
SEV launch-related data will be created under
/var/lib/libvirt/qemu/<domain_name>. Therefore, when calling into
qemuProcessSEVCreateFile we can assume @libDir as the directory prefix
rather than passing it explicitly.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Includes:
  maint: Run 'make update-copyright'
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The @con type security_context_t is actually a "char *", so the
correct check should be to dereference one more level; otherwise,
we could return/use the NULL pointer later in a subsequent
virSecuritySELinuxSetFileconImpl call (using @fcon).
Suggested-by: NMichal Prívozník <mprivozn@redhat.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If virSecuritySELinuxRestoreFileLabel returns 0 or -1 too soon, then
the @newpath will be leaked.
Suggested-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Because missing optional storage source is not error. The patch
address only local files. Fixing other cases is a bit ugly.
Below is example of error notice in log now:

error: virStorageFileReportBrokenChain:427 :
   Cannot access storage file '/path/to/missing/optional/disk':
  	No such file or directory
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Every time we call all domain stats for inactive domain with
unavailable storage source we get error message in logs [1]. It's a bit noisy.
While it's arguable whether we need such message or not for mandatory
disks we would like not to see messages for optional disks. Let's
filter at least for cases of local files. Fixing other cases would
require passing flag down the stack to .backendInit of storage
which is ugly.

Stats for active domain are fine because we either drop disks
with unavailable sources or clean source which is handled
by virStorageSourceIsEmpty in qemuDomainGetStatsOneBlockFallback.

We have these logs for successful stats since 25aa7035 (version 1.2.15)
which in turn fixes 596a1371 (version 1.2.12 )which added substantial
stats for offline disks.

[1] error message example:
qemuOpenFileAs:3324 : Failed to open file '/path/to/optional/disk': No such file or directory
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Introduce caching whether /dev/kvm is usable as the QEMU user:QEMU
group. This reduces the overhead of the QEMU capabilities cache
lookup. Before this patch there were many fork() calls used for
checking whether /dev/kvm is accessible. Now we store the result
whether /dev/kvm is accessible or not and we only need to re-run the
virFileAccessibleAs check if the ctime of /dev/kvm has changed.
Suggested-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Our code is not bug free. The refcounting I introduced will
almost certainly not work in some use cases. Provide a script
that will remove all the XATTRs set by libvirt so that it can
start cleanly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are setting label on kernel, initrd, dtb and slic_table files.
But we never restored it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It helps whe trying to match calls with virSecuritySELinuxSetAllLabel
if the order in which devices are set/restored is the same in
both functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When iterating over list of paths/disk sources to relabel it may
happen that the process fails at some point. In that case, for
the sake of keeping seclabel refcount (stored in XATTRs) in sync
with reality we have to perform rollback. However, if that fails
too the only thing we can do is warn user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's important to keep XATTRs untouched (well, in the same state
they were in when entering the function). Otherwise our
refcounting would be messed up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to what I did in DAC driver, this also requires the
same SELinux label to be used for shared paths. If a path is
already in use by a domain (or domains) then and the domain we
are starting now wants to access the path it has to have the same
SELinux label. This might look too restrictive as the new label
can still guarantee access to already running domains but in
reality it is very unlikely and usually an admin mistake.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It is going to be important to know if the current transaction we
are running is a restore operation or set label operation so that
we know whether to call virSecurityGetRememberedLabel() or
virSecuritySetRememberedLabel(). That is, whether we are in a
restore and therefore have to fetch the remembered label, or we
are in set operation and therefore have to store the original
label.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that we have seclabel remembering we can safely restore
labels for shared and RO disks. In fact we need to do that to
keep seclabel refcount stored in XATTRs in sync with reality.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This also requires the same DAC label to be used for shared
paths. If a path is already in use by a domain (or domains) then
and the domain we are starting now wants to access the path it
has to have the same DAC label. This might look too restrictive
as the new label can still guarantee access to already running
domains but in reality it is very unlikely and usually an admin
mistake.

This requirement also simplifies seclabel remembering, because we
can store only one seclabel and have a refcounter for how many
times the path is in use. If we were to allow different labels
and store them in some sort of array the algorithm to match
labels to domains would be needlessly complicated.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Because the implementation that will be used for label
remembering/recall is not atomic we have to give callers a chance
to enable or disable it. That is, enable it if and only if
metadata locking is enabled. Otherwise the feature MUST be turned
off.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are setting label on kernel, initrd, dtb and slic_table files.
But we never restored it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It helps whe trying to match calls with virSecurityDACSetAllLabel
if the order in which devices are set/restored is the same in
both functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When iterating over list of paths/disk sources to relabel it may
happen that the process fails at some point. In that case, for
the sake of keeping seclabel refcount (stored in XATTRs) in sync
with reality we have to perform rollback. However, if that fails
too the only thing we can do is warn user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's important to keep XATTRs untouched (well, in the same state
they were in when entering the function). Otherwise our
refcounting would be messed up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This file implements wrappers over XATTR getter/setter. It
ensures the proper XATTR namespace is used.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

For consistency, handle the @data "char **" (or remote_string)
assignments and processing similarly between various APIs
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Using a combination of VIR_ALLOC and VIR_STRDUP into a local
variable and then jumping to error on the VIR_STRDUP before
assiging it into the @data would cause a memory leak. Let's
just avoid that by assiging directly into @data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add guards to avoid calling strchr when @err_noinfo == NULL or
calling virErrorTestMsgFormatInfoOne when @err_info == NULL as
both would fail with a NULL deref.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

The virtualization driver has two connections to the virtlogd daemon,
one pipe fd for writing to the log file, and one socket fd for making
RPC calls. The typical sequence is to write some data to the pipe fd and
then make an RPC call to determine the current log file offset.

Unfortunately these two operations are not guaranteed to be handling in
order by virtlogd. The event loop for virtlogd may identify an incoming
event on both the pipe fd and socket fd in the same iteration of the
event loop. It is then entirely possible that it will process the socket
fd RPC call before reading the pending log data from the pipe fd.

As a result the virtualization driver will get an outdated log file
offset reported back.

This can be seen with the QEMU driver where, when a guest fails to
start, it will randomly include too much data in the error message it
has fetched from the log file.

The solution is to ensure we have drained all pending data from the pipe
fd before reporting the log file offset. The pipe fd is always in
blocking mode, so cares needs to be taken to avoid blocking. When
draining this is taken care of by using poll(). The extra complication
is that they might already be an event loop dispatch pending on the pipe
fd. If we have just drained the pipe this pending event will be invalid
so must be discarded.

See also https://bugzilla.redhat.com/show_bug.cgi?id=1356108Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If an editor has an XML file open, it may create a temporary . file. The
existance of this file will cause the virschematest to fail, so just
skip these editor temp files.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

/domain/memtune/hard_limit provides a way to cap the memory a VM process
can use, including the amount of memory the process can lock. When memory
locking of a VM is requested, <hard_limit> can be used to prevent the
potential host DoS issue mentioned in /domain/memoryBacking/locked
description.

This patch improves the <hard_limit> text by clarifying it can be used
to prevent "host crashing" when VM memory is locked.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The arguments to the N_() macro must only ever be a literal string. It
is not possible to use macro arguments, or use macro string
concatenation in this context. The N_() macro is a no-op whose only
purpose is to act as a marker for xgettext when it extracts translatable
strings from the source code. Anything other than a literal string will
be silently ignored by xgettext.

Unfortunately this means that the clever MSG, MSG2 & MSG_EXISTS macros
used for building up error message strings have prevented any of the
error messages getting marked for translation. We must sadly, revert to
a more explicit listing of strings for now.
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The autostart under session daemon might not behave as you'd
expect it to behave. This patch is inspired by latest
libvirt-users discussion:

https://www.redhat.com/archives/libvirt-users/2018-December/msg00047.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU commit v3.1.0-4-g0e89165829
KVM patch: https://lore.kernel.org/lkml/20181205191956.31480-1-ehabkost@redhat.com/Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>