- 10 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Also add a test case for the VMX handling of it.
-
- 09 11月, 2010 18 次提交
-
-
由 Jiri Denemark 提交于
Both conf/domain_conf.c and domain XML documentation have <timer> elements inside /domain/clock. Change domain.rng schema to be consistent with them.
-
由 Daniel P. Berrange 提交于
* docs/schemas/domain.rng: Fix merge error which left SPICE channel elements under VNC schema. * tests/qemuhelptest.c: Add SPICE flag to kvm-83 test * tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add <memballoon> element
-
由 Jiri Denemark 提交于
This helps editors with detecting the temporary files as XML since the temporary files do not contain <?xml ...?> declaration. Requested by https://bugzilla.redhat.com/show_bug.cgi?id=602277
-
由 Daniel P. Berrange 提交于
This extends the SPICE XML to allow channel security options <graphics type='spice' port='-1' tlsPort='-1' autoport='yes'> <channel name='main' mode='secure'/> <channel name='record' mode='insecure'/> </graphics> Any non-specified channel uses the default, which allows both secure & insecure usage * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add XML syntax for specifying per channel security options for spice. * src/qemu/qemu_conf.c: Configure channel security with spice
-
由 Daniel P. Berrange 提交于
QEMU crashes & burns if you try multiple Cirrus video cards, but QXL copes fine. Adapt QEMU config code to allow multiple QXL video cards * src/qemu/qemu_conf.c: Support multiple QXL video cards
-
由 Daniel P. Berrange 提交于
This extends the XML syntax for <graphics> to allow a password expiry time to be set eg <graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/> The timestamp is in UTC. * src/conf/domain_conf.h: Pull passwd out into separate struct virDomainGraphicsAuthDef to allow sharing between VNC & SPICE * src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo argument * src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c, src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed struct containing VNC password
-
由 Daniel P. Berrange 提交于
In common with VNC, the QEMU driver configuration file is used specify the host level TLS certificate location and a default password / listen address * src/qemu/qemu.conf: Add spice_listen, spice_tls, spice_tls_x509_cert_dir & spice_password config params * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of spice config parameters and updating -spice arg generation to use them * tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args, tests/qemuxml2argvtest.c: Expand test case to cover driver level configuration
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Allocate the TCP ports for SPICE before starting guest
-
由 Daniel P. Berrange 提交于
This supports the -spice argument posted for review against the latest upstream QEMU/KVM. This supports the bare minimum config with port, TLS port & listen address. The x509 bits are added in a later patch. * src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for -spice availability. Format -spice arg for command line * qemuhelptest.c: Add SPICE flag * qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics> for spice * qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg * qemuxml2argvtest.c: Add SPICE flag
-
由 Daniel P. Berrange 提交于
This supports the '-vga qxl' parameter in upstream QEMU/KVM which has SPICE support added. This isn't particularly useful until you get the next patch for -spice support. Also note that while the libvirt XML supports multiple video devices, this patch only supports a single one. A later patch can add support for 2nd, 3rd, etc PCI devices for QXL * src/qemu/qemu_conf.h: Flag for QXL support * src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it * tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test case for generating spice args with RHEL6 kvm
-
由 Daniel P. Berrange 提交于
This adds an element <graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/> This is the bare minimum that should be exposed in the guest config for SPICE. Other parameters are better handled as per host level configuration tunables * docs/schemas/domain.rng: Define the SPICE <graphics> schema * src/domain_conf.h, src/domain_conf.c: Add parsing and formatting for SPICE graphics config * src/qemu_conf.c: Complain about unsupported graphics types
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c: Add dummy entry in enumeration * docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag * src/domain_conf.c, src/domain_conf.h: Add QXL to video type enumerations
-
由 Daniel Veillard 提交于
To ease debugging this trivial patch allows to find what was compiled in in the local version of libvirt, this doesn't work for remote access but that's probably sufficient. With the patch I get on my machine: paphio:~/libvirt/tools -> ./virsh -V Virsh command line tool of libvirt 0.8.4 See web site at http://libvirt.org/ Compiled with support for: Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test Networking: Remote Daemon Network Bridging Netcf Nwfilter Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM Miscellaneous: SELinux Secrets Debug Readline paphio:~/libvirt/tools -> * tools/virsh.c: add -V option * tools/virsh.pod: document the extension
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Matthias Bolte 提交于
Suggested by danpb, as it's not up-to-date anymore and lacks many functions that were added to libvirtd.
-
由 Matthias Bolte 提交于
There is no point in trying to fill params beyond the first error, because when lxcDomainGetMemoryParameters returns -1 then the caller cannot detect which values in params are valid.
-
由 Matthias Bolte 提交于
Also fix a typo in the documentation of the function.
-
- 08 11月, 2010 8 次提交
-
-
由 Justin Clift 提交于
-
由 Daniel Veillard 提交于
-
由 Daniel Veillard 提交于
The patch is based on the possiblity in the QEmu command line to add -smbios options allowing to override the default values picked by QEmu. We need to detect this first from QEmu help output. If the domain is defined with smbios to be inherited from host then we pass the values coming from the Host own SMBIOS, but if the domain is defined with smbios to come from sysinfo, we use the ones coming from the domain definition. * src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum value * src/qemu/qemu_conf.c: scan the help output for the smbios support, and if available add support based on the domain definitions, and host data * tests/qemuhelptest.c: add the new enum in the outputs
-
由 Daniel Veillard 提交于
Read and store the data when initializing the driver.
-
由 Daniel Veillard 提交于
Move existing routines about virSysinfoDef to an util module, add a new entry point virSysinfoRead() to read the host values with dmidecode * src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c src/util/sysinfo.h: move to a new module, add virSysinfoRead() * src/Makefile.am: handle the new module build * src/libvirt_private.syms: new internal symbols * include/libvirt/virterror.h src/util/virterror.c: defined a new error code for that module * po/POTFILES.in: add new file for translations
-
由 Daniel Veillard 提交于
the element has a mode attribute allowing only 3 values: - emulate: use the smbios emulation from the hypervisor - host: try to use the smbios values from the node - sysinfo: grab the values from the <sysinfo> fields * docs/schemas/domain.rng: extend the schemas * src/conf/domain_conf.h: add the flag to the domain config * src/conf/domain_conf.h: parse and serialize the smbios if present
-
由 Daniel Veillard 提交于
* src/conf/domain_conf.h: defines a new internal type added to the domain structure * src/conf/domain_conf.c: parsing and serialization of that new type
-
由 Daniel Veillard 提交于
Currently includes a subset of the SMBIOS strings set
-
- 06 11月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
-
由 Chris Lalancette 提交于
Now that the virsh parsing has been revamped, we can implement qemu-monitor-command. This is basically the same as it was in previous iterations, but has now been tested to work both with the plain text monitor and the QMP monitor. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 05 11月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
The todo.pl script had an off-by-1 which meant any category with only a single bug would not appear * docs/todo.pl: Fix off-by-1
-
- 03 11月, 2010 6 次提交
-
-
由 Stefan Berger 提交于
During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down. The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.
-
由 Osier Yang 提交于
libvirtd.conf uses "libvirt" as the value of "unix_sock_group", however, group "libvirt" may not exist on the system, in this case the case will always fail. As a solution, replace "libvirt" with "$USER" in "tmp.conf".
-
由 Daniel Veillard 提交于
virPipeReadUntilEOF is used to read the stdout of exec'ed and this could fail to capture the full output and read only 1024 bytes. The problem is that this is based on a poll loop, and in the loop we read at most 1024 bytes per file descriptor, but we also note in the loop if poll indicates that the process won't output more than that on that fd by setting finished[i] = 1. The simplest way is that if we read a full buffer make sure finished[i] is still 0 because we will need another pass in the loop.
-
由 Eric Blake 提交于
* src/util/virterror.c (virErrorDomainName): Always supply trailing space if category was present.
-
由 Eric Blake 提交于
* src/xen/xen_driver.h (includes): Include main xen headers here... * src/xen/xs_internal.c (includes): ...rather than in just one of the sub-drivers.
-
由 Jim Fehlig 提交于
Commit e8066d53 broke the build with polkit0: remote.c: In function 'remoteDispatchAuthPolkit': remote.c:4177: error: 'rv' undeclared (first use in this function) Add missing identifier.
-
- 02 11月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
The remoteIO() method has wierd calling conventions, where it is passed a pre-allocated 'struct remote_call *' but then free()s it itself, instead of letting the caller free(). This fixes those weird semantics * src/remote/remote_driver.c: Sanitize semantics of remoteIO method wrt to memory release
-
由 Daniel P. Berrange 提交于
The comment for the <video> tag was a cut+paste error duplicating info about the <graphics> tag * docs/schemas/domain.rng: Fix comment for <video> tag
-
由 Daniel P. Berrange 提交于
A couple of places in the text monitor were overwriting the 'ret' variable with a >= 0 value before success was actually determined. So later error paths would not correctly return the -1 value. The drive_add code was not checking for errors like missing command * src/qemu/qemu_monitor_text.c: Misc error handling fixes
-
由 Daniel P. Berrange 提交于
NFS in root squash mode may prevent opening disk images to determine backing store. Ignore errors in this scenario. * src/security/security_selinux.c: Ignore open failures on disk images
-