Part of a series of cleanups to use new accessor methods.

* src/uml/uml_conf.c (umlBuildCommandLine): Use accessors.
* src/uml/uml_driver.c (umlDomainAttachUmlDisk): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Use accessors.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddSharedDevice, qemuRemoveSharedDevice, qemuSetUnprivSGIO):
Use accessors.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainObjCheckDiskTaint, qemuDomainSnapshotForEachQcow2Raw)
(qemuDomainCheckRemoveOptionalDisk, qemuDomainCheckDiskPresence)
(qemuDiskChainCheckBroken, qemuDomainDetermineDiskChain):
Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainCheckEjectableMedia)
(qemuDomainAttachVirtioDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUSBMassstorageDevice)
(qemuDomainAttachDeviceDiskLive, qemuDomainRemoveDiskDevice)
(qemuDomainDetachVirtioDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationStartNBDServer)
(qemuMigrationDriveMirror, qemuMigrationCancelDriveMirror)
(qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessHandleIOError, qemuProcessHandleBlockJob)
(qemuProcessInitPasswords): Likewise.
* src/qemu/qemu_driver.c (qemuDomainChangeDiskMediaLive)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/phyp/phyp_driver.c (phypDomainAttachDevice, phypBuildLpar):
Use accessors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/parallels/parallels_driver.c (parallelsGetHddInfo)
(parallelsAddHdd, parallelsApplyDisksParams, parallelsCreateVm):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/lxc/lxc_cgroup.c (virLXCCgroupSetupDeviceACL): Use
accessors.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceDiskLive)
(lxcDomainDetachDeviceDiskLive): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/locking/domain_lock.c (virDomainLockManagerAddDisk): Use
accessors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Use accessors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Use accessors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

Several places in domain_conf.c still open-code raw field access,
but that code will be touched later with the diskDef struct split
so I'm avoiding churn here.

* src/conf/domain_audit.c (virDomainAuditStart): Use accessors.
* src/conf/domain_conf.c (virDomainDiskIndexByName)
(virDomainDiskPathByName, virDomainDiskDefForeachPath)
(virDomainDiskSourceIsBlockType): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotAlignDisks):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

A future patch will split virDomainDiskDef, in order to track
multiple host resources per guest <disk>.  To reduce the size
of that patch, I've factored out the four most common accesses
into functions, so that I can incrementally upgrade the code
base to use the accessors, and so that code that doesn't care
about the distinction of per-file details won't have to be
changed when the struct changes.

* src/conf/domain_conf.h (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): New prototypes.
* src/conf/domain_conf.c (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): Implement them.
* src/libvirt_private.syms (domain_conf.h): Export them.
Signed-off-by: NEric Blake <eblake@redhat.com>

While writing disk source refactoring, I discovered that conversion
from XML to vmware modified the disk source in place; if the same
code is reached twice, the second call behaves differently because
the first call didn't clean up its mess.

* src/vmware/vmware_conf.c (vmwareParsePath): Avoid munging input
string.
* src/vmware/vmware_conf.h (vmwareParsePath): Make static.
Signed-off-by: NEric Blake <eblake@redhat.com>

It's easy to shed the daemon these days. With this XML snippet:

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/some/dummy/path/test.bin'>
        <seclabel model='dac' relabel='no'/>
      </source>
      <target dev='vdb' bus='virtio'/>
      <readonly/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
    </disk>

I get the SIGSEGV when starting the domain. The thing is, when
starting a domain, we check for its disk presence. For some reason,
when determining the disk chain, we parse the <seclabel/> (don't ask
me why). However, there's no label attribute in the XML, so we end up
calling virParseOwnershipIds() over NULL string:

 [Switching to Thread 0x7ffff10c4700 (LWP 30956)]
 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
 136     ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory.
 (gdb) bt
 #0  __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
 #1  0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115
 #2  0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385
 #3  qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414
 #4  0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250
 #5  0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0,
     vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813
 #6  0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051
 #7  0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105
 #8  0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The only supported flag for now is 'autodestroy'. In order to
support 'autodestroy', add support for close callbacks.

Add support for MAC address configuration on network bridge
interface.

Following Jim's comments about "add pci passthrough to libxl" patch:

https://www.redhat.com/archives/libvir-list/2014-March/msg00170.htmlSigned-off-by: NChunyan Liu <cyliu@suse.com>

Add virFDStreamOpenPTY() function which is a wrapper around
virFDStreamOpenFileInternal() with putting the device it opens into a
raw mode.

Make virChrdevOpen() use virFDStreamOpenPTY() for
VIR_DOMAIN_CHR_TYPE_PTY devices.

This fixes mangled console output when libvirt runs on FreeBSD as it
requires device it opens to be placed into a raw mode explicitly.

Fix the build without dbus.

tests/viriscsitest.c:27:12: error: 'EXIT_AM_SKIP' undeclared
(first use in this function)

Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.

Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.

This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: NChegu Vinod <chegu_vinod@hp.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When I start multi VMs coincidently and any of the cgroup directories
named machine doesn't exist. There's a chance that VM start failed because
of creating directory failed:
Unable to initialize /machine cgroup: File exists
When the errno returned by mkdir in virCgroupMakeGroup is EEXIST,
we should pass it through and continue to start the VM.
Signed-off-by: NWang Yufei <james.wangyufei@huawei.com>

The caller may not want all DBus error conditions to be turned
into libvirt errors, so provide a way for the caller to get
back the full DBusError object. They can then check the errors
and only report those that they consider to be fatal.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the DBus helper APIs require the values for an array
to be passed inline in the variadic argument list. This change
introduces support for passing arrays using a pointer to a plain
C array of the basic type. This is of particular benefit for
decoding messages when you don't know how many array elements
are being received.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The dbus_connection_send_with_reply_and_block method will
automatically call dbus_set_error_from_message for us. We
mistakenly thought we had todo it because of a flaw in the
systemd unit test mock impl. The latter should have directly
set the error object, instead of creating an error message
object.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virDBusMessageRead method should not have side-effects on
the message parameter passed in, so unref'ing it is wrong.
The caller should unref only when they decided they are done
with it.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The test suites often have to create DBus method reply messages
with payloads. Create two helpers for simplifying the process
of creating replies with payloads.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Split the virDBusMethodCall method into a couple of new methods
virDBusCall, virDBusCreateMethod and virDBusCreateMethodV.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

virLogParseDefaultPriority's successful return value is the same as
virLogSetDefaultPriority's successful return value. So it should be 0
rather than the parsed log level.
Signed-off-by: NZhou Yimin <zhouyimin@huawei.com>

s/profram/program/

Commit 5e1d5dde moved the functions using isciadm to util/viriscsi.c,
but ISCSIADM was only defined when the iscsi backend was compiled in.

Define it unconditionally to fix the build (and allow testing
of viriscsi.c) even if iscsi backend is disabled.

https://bugzilla.redhat.com/show_bug.cgi?id=1007754

When attaching a new device, we need to check if its boot order
configuration is compatible with current domain definition.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The offset of virDomainDeviceInfo structure within a device definition
varies with device type and some types do not contain the info structure
at all. This new API makes it easier to access the info structure from a
generic virDomainDeviceDef structure.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=844378

When qemu dies early after connecting to its monitor but before we
actually try to read something from the monitor, we would just fail
domain start with useless message:

    "An error occurred, but the cause is unknown"

This is because the real error gets reported in a monitor EOF handler
executing within libvirt's event loop.

The fix is to take any error set in qemuMonitor structure and propagate
it into the thread-local error when qemuMonitorClose is called and no
thread-local error is set.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Use $(shell cd $(...) && pwd) to set abs_*dir variables similarly to
what src/Makefile.am does.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go.  Implement a flag to use regex
interpretation of the event filter.

While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)

* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: NEric Blake <eblake@redhat.com>

Filtering monitor events by name requires tracking the name for
the duration of the filtering.  In order to free the name, I
found it easiest to just piggyback on the user's freecb function,
which gets called when the event is deregistered.

For events without a name filter, we have the design of multiple
client registrations sharing a common server registration, because
the server side uses the same callback function and we reject
duplicate use of the same function.  But with events in the mix,
we want to be able to allow the same function pointer to be used
with more than one event name.  The solution is to tweak the
duplicate detection code to only act when there is no additional
filtering; if name filtering is in use, there is exactly one
client registration per server registration.  Yes, this means
that there is no longer a bound on the number of server
registrations possible, so a malicious client could repeatedly
register for the same name event to exhaust server memory.  On
the other hand, we already restricted monitor events to require
write access (compared to normal events only needing read access),
and separated it into the intentionally unsupported
libvirt-qemu.so, with documentation that using this function is
for debug purposes only; so it is not a security risk worth
worrying about a client trying to abuse multiple registrations.

* src/conf/domain_event.c (virDomainQemuMonitorEventData): New
struct.
(virDomainQemuMonitorEventFilter)
(virDomainQemuMonitorEventCleanup): New functions.
(virDomainQemuMonitorEventDispatchFunc)
(virDomainQemuMonitorEventStateRegisterID): Use new struct.
* src/conf/object_event.c (virObjectEventCallbackListCount)
(virObjectEventCallbackListAddID)
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Drop duplicate detection
when filtering is in effect.
Signed-off-by: NEric Blake <eblake@redhat.com>

Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so.  If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.

* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>