- 27 9月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
This reverts commit edaf4ebe. This uses "reconnect" as attribute for <source> element, but we already have a <reconnect> element for <source> element for chardev devices. Since this is the same feature for different device it should be presented in XML the same way. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 20 9月, 2017 2 次提交
-
-
由 ZhiPeng Lu 提交于
For vhost-user ports, Open vSwitch acts as the server and QEMU the client. When OVS crashed or restart, QEMU shoule be reconnect to OVS. Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Ashish Mittal 提交于
Alter the schema to allow a VxHS block device. Sample XML is: <disk type='network' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'> <host name='192.168.0.1' port='9999'/> </source> <target dev='vda' bus='virtio'/> <serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> Update the html docs to describe the capability for VxHS. Alter the qemuxml2xmltest to validate the formatting. Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 12 9月, 2017 2 次提交
-
-
由 Michal Privoznik 提交于
Some elements are offset just one space compared to their parent, some are misaligned completely, and so on. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
If we have <choice/> with just one value to chose from, it's no choice. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 29 8月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 02 8月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1462653 Just like I've added support for setting rx_queue_size (in c56cdf25 and friends), qemu just gained support for setting tx ring size. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 19 7月, 2017 1 次提交
-
-
由 Jim Fehlig 提交于
/domain/devices/disk/driver/@name is not a required or mandatory attribute according to formatdomain, and indeed it was agreed on IRC that the attribute is "optional for input, recommended (but not required) for output". Currently the schema requires the attribute, causing virt-xml-validate to fail on disk config where the driver name is not explicitly specified. E.g. # cat test.xml | grep -A 5 cdrom <disk type='file' device='cdrom'> <driver type='raw'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> # virt-xml-validate test.xml Relax-NG validity error : Extra element devices in interleave test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content test.xml fails to validate Relaxing the name attribute to be optional fixes the validation # virt-xml-validate test.xml test.xml validates
-
- 15 7月, 2017 2 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NLaine Stump <laine@laine.org>
-
由 Andrea Bolognani 提交于
Adding it to the virDomainControllerPCIModelName enumeration is enough for existing code to handle it, so parsing and formatting will work without further tweaking. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NLaine Stump <laine@laine.org>
-
- 11 7月, 2017 3 次提交
-
-
由 Cédric Bosdonnat 提交于
Users may want to run the init command of a container as a special user / group. This is achieved by adding <inituser> and <initgroup> elements. Note that the user can either provide a name or an ID to specify the user / group to be used. This commit also fixes a side effect of being able to run the command as a non-root user: the user needs rights on the tty to allow shell job control. Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Cédric Bosdonnat 提交于
Some containers may want the application to run in a special directory. Add <initdir> element in the domain configuration to handle this case and use it in the lxc driver. Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Cédric Bosdonnat 提交于
When running an application container, setting environment variables could be important. The newly introduced <initenv> tag in domain configuration will allow setting environment variables to the init program. Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 6月, 2017 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Add support for vgaconf driver configuration. In domain xml it looks like this: <video> <driver vgaconf='io|on|off'> <model .../> </video> It was added with bhyve gop video in mind to allow users control how the video device is exposed to the guest, specifically, how VGA I/O is handled. One can refer to the bhyve manual page to get more detailed description of the possible VGA configuration options: https://www.freebsd.org/cgi/man.cgi?query=bhyve&manpath=FreeBSD+12-current The relevant part could be found using the 'vgaconf' keyword. Also, add some tests for this new feature. Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 20 6月, 2017 1 次提交
-
-
由 Farhan Ali 提交于
Update the per device boot schema to add an optional loadparm parameter. eg: <boot order='1' loadparm='2'/> Extend the virDomainDeviceInfo to support loadparm option. Modify the appropriate functions to parse loadparm from boot device xml. Add the xml2xml test to validate the field. Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
-
- 08 6月, 2017 9 次提交
-
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
<interface type='user'> <mac address='52:54:56:5a:5c:5e'/> <model type='virtio'/> <driver iommu='on' ats='on'/> </interface> https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Add a new iotlb attribute to the iommu device to control the device IOTLB support for intel-iommu. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 26 5月, 2017 2 次提交
-
-
由 Bjoern Walk 提交于
Make CCW devices available to the node_device driver. The devices are already seen by udev so let's implement necessary code for detecting them properly. Topologically, CCW devices are similar to PCI devices, e.g.: +- ccw_0_0_1a2b | +- scsi_host0 | +- scsi_target0_0_0 | +- scsi_0_0_0_0 Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
-
由 Ján Tomko 提交于
Add an attribute to control extended interrupt mode. https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 15 5月, 2017 3 次提交
-
-
由 Ján Tomko 提交于
Add a new attribute to control the caching mode. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new attribute to control interrupt remapping. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new <ioapic> element with a driver attribute. Possible values are qemu and kvm. With 'qemu', the I/O APIC can be put in the userspace even for KVM domains. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
- 28 4月, 2017 9 次提交
-
-
由 Pavel Hrdina 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Acked-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Peter Krempa 提交于
NBD does not mandate a "filename". Gluster can have more servers. Split them so that we can tighten the schema.
-
由 Peter Krempa 提交于
ftp/tftp/sheepdog have a mandatory filename and support only one host. There are no additional options for them.
-
由 Peter Krempa 提交于
Make the schema more strict for HTTP disks requiring a name and mandating exactly one source host. ftp/tftp entries were not moved here, since http transport also will support cookies and other options, which will be added later.
-
由 Peter Krempa 提交于
RBD driver supports specifying a snapshot image name or config file. Create a define for RBD and move the specifics there.
-
由 Peter Krempa 提交于
Move it to the place where actually interleaving elements can be placed.
-
由 Peter Krempa 提交于
'diskSourceNetwork' schema define was rather big and it would be hard to simplify it. Split out the host portion subelement into a separate define.
-
由 Peter Krempa 提交于
They don't contain any elements to interleave.
-
由 Jiri Denemark 提交于
This patch introduces <cache level='N' mode='emulate'/> <cache mode='passthrough'/> <cache mode='disable'/> sub element of /domain/cpu. Currently only a single <cache> element is allowed. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
We are currently parsing only rx/frames/max because that's the only value that makes sense for us. The tun device just added support for this one and the others are only supported by hardware devices which we don't need to worry about as the only way we'd pass those to the domain is using <hostdev/> or <interface type='hostdev'/>. And in those cases the guest can modify the settings itself. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 27 3月, 2017 1 次提交
-
-
由 Erik Skultety 提交于
A mediated device will be identified by a UUID (with 'model' now being a mandatory <hostdev> attribute to represent the mediated device API) of the user pre-created mediated device. We also need to make sure that if user explicitly provides a guest address for a mdev device, the address type will be matching the device API supported on that specific mediated device and error out with an incorrect XML message. The resulting device XML: <devices> <hostdev mode='subsystem' type='mdev' model='vfio-pci'> <source> <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'> </source> </hostdev> </devices> Signed-off-by: NErik Skultety <eskultet@redhat.com>
-