Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 20 3月, 2014 13 次提交
  3. 19 3月, 2014 16 次提交
  5. 18 3月, 2014 11 次提交
    • D
      Remove global log buffer feature entirely · c0c8c1d7
      由 Daniel P. Berrange 提交于 
      A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.

The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      c0c8c1d7
    • D
      Switch to filtering based on log source name instead of filename · 975b2392
      由 Daniel P. Berrange 提交于 
      Currently the log filter strings are used in a string comparison
against the source filename each time log message is emitted.
If no log filters at all are set, there's obviously no string
comparison to be done. If any single log filter is set though,
this imposes a compute burden on every logging call even if logs
from the file in question are disabled. This string comparison
must also be done while the logging mutex is held, which has
implications for concurrency when multiple threads are emitting
log messages.

This changes the log filtering to be done based on the virLogSource
object name. The virLogSource struct is extended to contain
'serial' and 'priority' fields. Any time the global log filter
rules are changed a global serial number is incremented. When a
log message is emitted, the serial in the virLogSource instance
is compared with the global serial number. If out of date, then
the 'priority' field in the virLogSource instance is updated based
on the new filter rules. The 'priority' field is checked to see
whether the log message should be sent to the log outputs.

The comparisons of the 'serial' and 'priority' fields are done
with no locks held. So in the common case each logging call has
an overhead of 2 integer comparisons, with no locks held. Only
if the decision is made to forward the message to the log output,
or if the 'serial' value is out of date do locks need to be
acquired.

Technically the comparisons of the 'serial' and 'priority' fields
should be done with locks held, or using atomic operations. Both
of these options have a notable performance impact, however, and
since all writes a protected by a global mutex, it is believed
that worst case behaviour where the fields are read concurrently
with being written would merely result in an mistaken emission
or dropping of the log message in question. This is an acceptable
tradeoff for the performance benefit of avoiding locking.

As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 4.6 seconds to do 51200 iterations.
After this optimization it only takes 3.3 seconds, with the log
APIs no longer being a relevant factor in the running time.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      975b2392
    • D
      Add virLogSource variables to all source files · 2835c1e7
      由 Daniel P. Berrange 提交于 
      Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      2835c1e7
    • D
      Turn virLogSource into a struct instead of an enum · 098dd79e
      由 Daniel P. Berrange 提交于 
      As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      098dd79e
    • D
      Move dtrace probe macros into separate header file · b29275d9
      由 Daniel P. Berrange 提交于 
      The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      b29275d9
    • D
      Refactor code that skips logging of error messages · 3887c5d8
      由 Daniel P. Berrange 提交于 
      The error reporting code will invoke a callback when any error
is raised and the default callback will print to stderr. The
virRaiseErrorFull method also sends all error messages on to the
logging code, which also prints to stderr by default. To avoid
duplicated data on stderr, the logging code has some logic to
skip emission when no log outputs are configured, which checks
whether the virLogSource == VIR_LOG_FROM_ERROR.

Meanwhile the libvirtd daemon can register another callback which
is used to reduce log message priority from error to a lower level.
When this is used we do want messages to end up on stderr, so the
error code will conditionally use either VIR_LOG_FROM_FILE or
VIR_LOG_FROM_ERROR depending on whether such a callback is provided.

This will all complicate later refactoring. By pushing the checks
for whether a log output is present up a level into the error code,
the special cases can be isolated in one place.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      3887c5d8
    • D
      Reduce performance overhead of the global log buffer · 27f2edf9
      由 Daniel P. Berrange 提交于 
      With the vast number of log debug statements in the code, the
logging framework has a measurable performance impact on libvirt
code, particularly in the daemon event loop.

The global log buffer records every single log message triggered
whether anyone cares to see them or not. This makes it impossible
to eliminate the overhead of printf format expansions in any of
the logging code. It is possible to disable the global log buffer
in libvirtd itself, but this doesn't help client side library
code. Also even if disabled by the config file, the existence of
the feature makes other performance improvements in the logging
layer impossible.

Instead of logging every single message to the global buffer, only
log messages that pass the log filters. This if libvirtd is set
to have log_filters="1:libvirt 1:qemu" the global log buffer will
only get filled with those messages instead of everything. This
reduces the performance burden, as well as improving the signal
to noise ratio of the log buffer.

As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 1 minute 40 seconds to do 51200
iterations with nearly all the time shown against the logging
code. After this optimization it only takes 4.6 seconds.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      27f2edf9
    • M
      virNetServerNewPostExecRestart: Initialize @max_anonymous_clients · 1a8d91d9
      由 Michal Privoznik 提交于 
      Coverity spotted a use of possibly undefined variable. If a server is
restarting as an result of update, the JSON file that keeps current
value of some variables will not contain the new variables. This is
the case of @max_anonymous_clients too. We are correctly querying if
there's "max_anonymous_clients" in the JSON, however, we are not
setting a sane default if there's none.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      1a8d91d9
    • M
      qemuDomainSetInterfaceParameters: Allow bandwidth clear out · 14973382
      由 Michal Privoznik 提交于 
      We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      14973382
    • M
      cfg.mk: Fix whitespaces · 11c5c9a9
      由 Martin Kletzander 提交于 
      Just to align the backslashes with most of the file.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      11c5c9a9
    • J
      Remove double space in file name comment check · 80ac0176
      由 Ján Tomko 提交于 
      Reported by Martin Kletzander
      80ac0176