When a block job is completed, the security image metadata are
moved to the new image. If this fails an warning is printed, but
the message contains only domain name and lacks image paths. Put
them both into the warning message.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Currently, there are only a few lines of code so a separate
function was not necessary, but this will change. So instead of
putting all the new code under 'case
QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT' create a separate function.
Just like every other case has one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

I guess the reason for that was the automatic interpretation/stringification of
setfilecon_errno, but the code was not nice to read and it was a bit confusing.
Also, the logs and error states get cleaner this way.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Coverity noted that 'reply' can be NULL after calling
qemuAgentCommand().  Avoid dereferencing reply in
qemuAgentErrorComandUnsupported() in that case.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Introduced by commit <c854e0bd> that
tried to fix an issue where we would fail to parse values from files.

We cannot change the original pointer that is going to be used by
VIR_AUTOFREE.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747440Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

'virQEMUDriverConfigPtr cfg' is declared, initiated, but never
used in virQEMUDriverCreateCapabilities().
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NChristophe de Dinechin <dinechin@redhat.com>

There are some network file systems that do support XATTRs (e.g.
gluster via FUSE). And they appear to support SELinux too.
However, not really. Problem is, that it is impossible to change
SELinux label of a file stored there, and yet we claim success
(rightfully - hypervisor succeeds in opening the file). But this
creates a problem for us - from XATTR bookkeeping POV, we haven't
changed the label and thus if we remembered any label, we must
roll back and remove it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740506Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

This function is no longer needed because after previous commits
it's just an alias to virSecuritySELinuxSetFilecon.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Now, that we don't need to remember if setting context is
'optional' (the argument only made
virSecuritySELinuxSetFileconImpl() return a different success
code), we can drop it from the _virSecuritySELinuxContextItem
structure as we don't need to remember it in transactions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

There is no real difference between
virSecuritySELinuxSetFilecon() and
virSecuritySELinuxSetFileconOptional(). Drop the latter in favour
of the former.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

The only thing that the @optional argument does is that it makes
the function return 1 instead of 0 if setting SELinux context
failed in a non-critical fashion. Drop the argument then and
return 1 in that case. This enables caller to learn if SELinux
context was set or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

As qemu documents we should use everything in the 'props' sub-object of
the data returned by query-hotpluggable-cpus. Until now we only used
everything we recognized, but that may break in cases when qemu
introduces new fields.

This change requires a fix to the test data as some fields were
reordered.

https://bugzilla.redhat.com/show_bug.cgi?id=1741658Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

On error paths, info_ret could potentially leak. Make sure it's freed.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

After 7cfb7aab commit starting a domain pullutes logs with
warnings like [1]. The reason is resource files do not
have timestamp before starting a domain and after destroying
domain the timestamp is cleared. Let's check the timestamp
only if attribute with refcounter is found.

[1] warning : virSecurityValidateTimestamp:198 : Invalid XATTR timestamp detected on \
    /some/path secdriver=dac
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use the templates at https://github.com/terinjokes/StickerConstructorSpec
to provide square and hexagon logos for libvirt, suitable for printing
as stickers.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order.  Fix up all domain commands so that they're in alphabetical order
again.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When we're collecting guest information, older agents may not support
all agent commands. In the case where the user requested all info
types (i.e. types == 0), ignore unsupported command errors and gather as
much information as possible. If the agent command failed for some other
reason, or if the user explciitly requested a specific info type (i.e.
types != 0), abort on the first error.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Due to a typo, some of the field names didn't have closing quotes,
the information about the hostname was omitted and there was an
empty line missing after filesystem info description (which helps
our docs generator produce better looking HTML).
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

According to HTML specification, <a name=''> works in HTML4, but
<a id=''> works in both HTML4 and HTML5. This is followed even in
docs/page.xsl where HTML bookmark links are generated only for
those anchors which have @id attribute.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Refactoring the method signatures in preparation for
checking boot index of the mediated devices.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Changing the error messages to report the problem encountered.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

At two places we are open coding xdr_free():
remoteRelayDomainEventTunable() and
remoteRelayDomainEventJobCompleted().
Bot of these functions use make_nonnull_domain() to put domain
IDs tuple into return structure and then continue encoding the
rest of structure. If that fails, they call VIR_FREE() directly.
While this okay, we should use xdr_free() which frees the whole
return structure for us.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

If there's a problem in encoding @ret (for instance
virTypedParamsSerialize() fails) then @ret is leaked.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The same way we check for limits when decoding typed parameters
(virTypedParamsDeserialize()) we should do the same check when
serializing them so that we don't put onto the wire more than our
limits allow. Surprisingly, we were doing so explicitly in some
places but not all of them.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJonathon Jongsma <jjongsma@redhat.com>

The return structure is a bit complicated and that's why it is
very easy to check for RPC limits incorrectly. The structure is
an array of remote_domain_stats_record structures with the limit
of REMOTE_DOMAIN_LIST_MAX. The latter structure then poses a
different limit on typed params:
REMOTE_CONNECT_GET_ALL_DOMAIN_STATS_MAX (which is what we are
checking for mistakenly).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJonathon Jongsma <jjongsma@redhat.com>

Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

If a libvirt error occurred during a test, then virTestRun()
reports it (regardless of test returning success or failure).
For instance, in this specific case, a hostdev is detached twice
and the second attempt is expected to fail. It does fail and
libvirt error is reported which is then printed onto stderr.
Insert virResetLastError() calls on appropriate places to avoid
that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's no need to have VIR_DEBUG() really.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The virTestRun() already reports the same.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In this test there is this macro CHECK_LIST_COUNT() which checks
if a list of PCI devices contains expected count. If it doesn't
an error is reported and 'goto cleanup' is invoked. There's no
real reason for that as even since its introduction there is no
cleanup done and all 'cleanup' labels contain nothing but
'return'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There are few functions called from the test which return an
integer but their retval is compared as if it was a pointer.
Now, there is nothing wrong with that from machine POV, but
from readability perspective it's wrong.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>