- 02 12月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Tweak the existing file so that it can be tested for command line corectness.
-
- 23 7月, 2013 1 次提交
-
-
由 John Ferlan 提交于
There are two ways to use a iSCSI LUN as disk source for qemu. * The LUN's path as it shows up on host, e.g. /dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1 * The libiscsi URI from the storage pool source element host attribute, e.g. iscsi://demo.org:6000/iqn.1992-01.com.example/1 For a "volume" type disk, if the specified "pool" is of iscsi type, we should support to use the LUN in either of above 2 ways. That's why to introduce a new XML tag "mode" for the disk source (libvirt should support iscsi pool with libiscsi, but it's another new feature, which should be done later). The "mode" can be either of "host" or "direct". Use "host" to indicate use of the LUN with the path as it shows up on host. Use "direct" to indicate to use it with the source pool host URI (future patches may support to use network type libvirt storage too, e.g. Ceph)
-
- 25 4月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
- 08 4月, 2013 3 次提交
-
-
由 Osier Yang 提交于
"seclabels" is only valid for 'file' or 'block' type storage volume.
-
由 Osier Yang 提交于
"startupPolicy" is only valid for file type storage volume, otherwise it fails on starting the domain.
-
由 Osier Yang 提交于
With this patch, one can specify the disk source using libvirt storage like: <disk type='volume' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source pool='default' volume='fc18.img'/> <target dev='vdb' bus='virtio'/> </disk> "seclabels" and "startupPolicy" are not supported for this new disk type ("volume"). They will be supported in later patches. docs/formatdomain.html.in: * Add documents for new XMLs docs/schemas/domaincommon.rng: * Add rng for new XMLs; src/conf/domain_conf.h: * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef) * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType src/conf/domain_conf.c: * New helper virDomainDiskSourcePoolDefParse to parse the 'volume' type disk source. * New helper virDomainDiskSourcePoolDefFree to free the source def if 'volume' type disk. tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml: tests/qemuxml2xmltest.c: * New test
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 17 4月, 2012 1 次提交
-
-
由 Osier Yang 提交于
A "ide-drive" device can be either a hard disk or a CD-ROM, if there is ",media=cdrom" specified for the backend, it's a CD-ROM, otherwise it's a hard disk. Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd" since commit 1f56e32, and ",media=cdrom" is not required for ide-cd anymore. "ide-drive" is still supported for backwards compatibility, but no doubt we should go foward.
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
* src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
-
- 10 2月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
-
- 29 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Use it in all places where a memory or storage request size is converted to a larger granularity. This avoids requesting too small memory or storage sizes that could result from the truncation done by a simple division. This extends the round up fix in 6002e040 to the whole codebase. Instead of reporting errors for odd values in the VMX code round them up. Update the QEMU Argv tests accordingly as the original memory size 219200 isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change it to 219100 and 219136. Use two different values intentionally to make sure that rounding up works. Update virsh.pod accordingly, as rounding down and rejecting are replaced by rounding up.
-
- 29 7月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 18 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Existing applications using libvirt are not aware of the disk controller concept. Thus, after parsing the <disk> definitions in the XML, it is neccessary to create <controller> elements to satisfy all requested disks, as per their defined drive addresses * src/conf/domain_conf.c, src/conf/domain_conf.h, src/libvirt_private.syms: Add virDomainDefAddDiskControllers() method for populating disk controllers, and call it after parsing disk definitions. * src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers() when doing ARGV -> XML conversion * tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller data to all data files which don't have it already
-
- 16 1月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
- 10 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-