- 21 9月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The next patch will add a syntax check that flags this usage in xen as awkward - while it was valid memory management, it was very hard to maintain. Swapping to a more traditional allocation may be a bit slower, but easier to understand. * src/xen/xend_internal.c (xenDaemonListDomainsOld): Use two-level allocation, rather than abusing allocation function. (xenDaemonLookupByUUID): Update caller.
-
- 16 9月, 2011 1 次提交
-
-
由 Peter Krempa 提交于
/usr/lib/stdlib.h in Mac OS X and probably also in BSD's exports this symbol :(
-
- 09 9月, 2011 1 次提交
-
-
由 Philipp Hahn 提交于
'+' in strings get translated to ' ' when editing domains. While xenDaemonDomainCreateXML() did URL-escape the sexpr, xenDaemonDomainDefineXML() did not. Remove the explicit urlencode() in xenDaemonDomainCreateXML() and add the direct encoding calls to xend_op_ext() because it calls xend_post() which uses "Content-Type: application/x-www-form-urlencoded". According to <http://www.w3.org/TR/html4/interact/forms.html#h-17.13.4.1> this requires all parameters to be url-encoded as specified in rfc1738. Notice: virBufferAsprintf(..., "%s=%s", ...) is again replaced by three calls to virBufferURIEncodeString() and virBufferAddChar() because '=' is a "reserved" character, which would get escaped by virBufferURIEncodeString(), which - by the way - escapes anything not c_isalnum(). Signed-off-by: NPhilipp Hahn <hahn@univention.de>
-
- 05 9月, 2011 1 次提交
-
-
由 Eric Blake 提交于
I got confused when 'virsh domblkinfo dom disk' required the path to a disk (which can be ambiguous, since a single file can back multiple disks), rather than the unambiguous target device name that I was using in disk snapshots. So, in true developer fashion, I went for the best of both worlds - all interfaces that operate on a disk (aka block) now accept either the target name or the unambiguous path to the backing file used by the disk. * src/conf/domain_conf.h (virDomainDiskIndexByName): Add parameter. (virDomainDiskPathByName): New prototype. * src/libvirt_private.syms (domain_conf.h): Export it. * src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow searching by path, and decide whether ambiguity is okay. (virDomainDiskPathByName): New function. (virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update callers. * src/qemu/qemu_driver.c (qemudDomainBlockPeek) (qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig) (qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise. * src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath): Likewise. * src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive) (libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig) (libxlDomainUpdateDeviceConfig): Likewise. * src/uml/uml_driver.c (umlDomainBlockPeek): Likewise. * src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise. * docs/formatsnapshot.html.in: Update documentation. * tools/virsh.pod (domblkstat, domblkinfo): Likewise. * docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on disk targets. * docs/schemas/domainsnapshot.rng (disksnapshot): Update to match. * tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
-
- 02 9月, 2011 2 次提交
-
-
由 Jim Fehlig 提交于
On systems with many pcpus, the sexpr returned by xend can be quite large for dom0 when it is configured to have #vcpus = #pcpus (default). E.g. on a 80 pcpu system, where dom0 had 80 vcpus, the sexpr details for dom0 was 73817 bytes! Increase maximum buffer size to 256k.
-
由 Jim Fehlig 提交于
xenDaemonDomainFetch() was overwriting errors reported by xend_get() and xend_req(). E.g. without patch error: failed Xen syscall xenDaemonDomainFetch failed to find this domain with patch error: internal error Xend returned HTTP Content-Length of 73817, which exceeds maximum of 65536
-
- 23 8月, 2011 1 次提交
-
-
由 Osier Yang 提交于
-
- 19 8月, 2011 2 次提交
-
-
由 Eric Blake 提交于
ACK was given too soon. According to the code, the xm driver is only used for inactive domains, and has no notion of an active domain, thus, it cannot support undefine of a running domain. The real fix for xen needs to be in the unified driver and/or the xend level. This reverts commit 49186ded.
-
由 Osier Yang 提交于
-
- 03 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Revert 6a1f5f56. Now that libvirt_iohelper takes fds by inheritance rather than by open() (commit 1eb66479), there is no longer a race where the parent can unlink() a file prior to the iohelper open()ing the same file. From there, it makes more sense to have the callers both create and unlink, rather than the caller create and the stream unlink, since the latter was only needed when iohelper had to do the unlink. * src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile): Callers are responsible for deletion. * src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created file on failure. (virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter. * src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers. * src/qemu/qemu_driver.c (qemuDomainScreenshot) (qemuDomainOpenConsole): Likewise. * src/storage/storage_driver.c (storageVolumeDownload) (storageVolumeUpload): Likewise. * src/uml/uml_driver.c (umlDomainOpenConsole): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
-
- 29 7月, 2011 4 次提交
-
-
由 Eric Blake 提交于
Found by: for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h) do git grep "\(\.\|->\)$f\b" src/xen done | cat and looking through the resulting list to see which callback struct members are still necessary. * src/xen/xen_driver.h (xenUnifiedDriver): Drop all callbacks that are only used directly. * src/xen/xen_hypervisor.c (xenHypervisorDriver): Shrink list. * src/xen/xen_inotify.c (xenInotifyDriver): Likewise. * src/xen/xend_internal.c (xenDaemonDriver): Likewise. * src/xen/xm_internal.c (xenXMDriver): Likewise. * src/xen/xs_internal.c (xenStoreDriver): Likewise.
-
由 Eric Blake 提交于
No need to use a for loop if we know there is exactly one client. Found by: for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h) do git grep "\(\.\|->\)$f\b" src/xen done | cat and looking through the resulting list to see which callback struct members are used exactly once. The next patch will ensure that we don't reintroduce uses of these callbacks. * src/xen/xen_driver.c (xenUnifiedClose): Call close unconditionally, to match xenUnifiedOpen. (xenUnifiedNodeGetInfo, xenUnifiedDomainCreateXML) (xenUnifiedDomainSave, xenUnifiedDomainRestore) (xenUnifiedDomainCoreDump, xenUnifiedDomainUpdateDeviceFlags): Make direct call to lone implementation. * src/xen/xend_internal.h (xenDaemonDomainCoreDump) (xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Add prototypes. * src/xen/xend_internal.c (xenDaemonDomainCoreDump) (xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Export.
-
由 Eric Blake 提交于
The callback struct is great when iterating through several possibilities, but when calling a known callback, it's just overhead. We can make the direct call in those cases. * src/xen/xen_driver.c (xenUnifiedOpen, xenUnifiedDomainSuspend) (xenUnifiedDomainResume, xenUnifiedDomainDestroyFlags): Make direct calls instead of going through callback.
-
由 Eric Blake 提交于
Using C99 initializers and xen-specific prefixes will make it so that future patches are less likely to add callback members to the xenUnifiedDriver struct, since the goal is to get rid of the callback struct in the first place. * src/xen/xen_driver.h (xenUnifiedDriver): Rename all struct members, to make it obvious which ones are still in use. * src/xen/xen_driver.c: Update all callers. * src/xen/xen_hypervisor.c (xenHypervisorDriver): Rewrite with C99 initializers. * src/xen/xend_internal.c (xenDaemonDriver): Likewise. * src/xen/xs_internal.c (xenStoreDriver): Likewise. * src/xen/xm_internal.c (xenXMDriver): Likewise. * src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
-
- 26 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT, so should virDomainGetVcpusFlags. Unfortunately, the virsh counterpart 'virsh vcpucount' has already commandeered --current for a different meaning, so teaching virsh to expose this in the next patch will require a bit of care. * src/libvirt.c (virDomainGetVcpusFlags): Allow VIR_DOMAIN_AFFECT_CURRENT. * src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise. * src/test/test_driver.c (testDomainGetVcpusFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
-
- 22 7月, 2011 4 次提交
-
-
由 Eric Blake 提交于
For all hypervisors that support save and restore, the new API now performs the same functions as the old. VBox is excluded from this list, because its existing domainsave is broken (there is no corresponding domainrestore, and there is no control over the filename used in the save). A later patch should change vbox to use its implementation for managedsave, and teach start to use managedsave results. * src/libxl/libxl_driver.c (libxlDomainSave): Move guts... (libxlDomainSaveFlags): ...to new function. (libxlDomainRestore): Move guts... (libxlDomainRestoreFlags): ...to new function. * src/test/test_driver.c (testDomainSave, testDomainSaveFlags) (testDomainRestore, testDomainRestoreFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainSave) (xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore) (xenUnifiedDomainRestoreFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore): Rename and move guts. (qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore) (qemuDomainRestoreFlags): ...here. (qemudDomainSaveFlag): Rename... (qemuDomainSaveInternal): ...to this, and update callers.
-
由 Eric Blake 提交于
Build failure on xenapi_driver from compiler warnings (flags was unused). Build failure on xen (incorrect number of arguments). And in fixing that, I obeyed the comments of struct xenUnifiedDriver that state that we want to minimize the number of callback functions in that struct, not add to it. * src/xen/xen_driver.c (xenUnifiedDomainDestroyFlags): Use correct arguments. (xenUnifiedDomainDestroy): Simplify. * src/xen/xen_driver.h (xenUnifiedDriver): Remove unused callback. * src/xen/xen_hypervisor.c (xenHypervisorDestroyDomain): Likewise. * src/xen/xend_internal.c (xenDaemonDomainDestroy): Likewise. * src/xen/xend_internal.h (xenDaemonDomainDestroyFlags): Likewise. * src/xen/xm_internal.c (xenXMDriver): Likewise. * src/xen/xs_internal.c (xenStoreDriver): Likewise. * src/xen/xen_inotify.c (xenInotifyDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainDestroyFlags): Reject unknown flags.
-
由 Michal Privoznik 提交于
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 21 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* src/conf/domain_event.c (virDomainEventDispatch): Fix typo. * src/internal.h (ATTRIBUTE_FMT_PRINTF): Likewise. * src/libvirt.c (virStreamEventUpdateCallback): Likewise. * src/remote/remote_driver.c (doRemoteOpen): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendProbeTarget): Likewise. * src/util/virterror.c (virConnCopyLastError, virCopyLastError): Likewise. * src/xen/xend_internal.h (xend_wait_for_devices): Likewise.
-
- 20 7月, 2011 1 次提交
-
-
由 Osier Yang 提交于
-
- 16 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Also fix a logic bug in xenXMDomain{Attach,Detach}DeviceFlags, where (flags & VIR_DOMAIN_DEVICE_MODIFY_CURRENT) is always false. * src/xen/xen_driver.c (xenUnifiedDomainXMLFromNative) (xenUnifiedDomainXMLToNative, xenUnifiedDomainBlockPeek): Reject unknown flags. * src/xen/xen_hypervisor.c (xenHypervisorOpen) (xenHypervisorGetDomainState): Likewise. * src/xen/xen_inotify.c (xenInotifyOpen): Likewise. * src/xen/xs_internal.c (xenStoreOpen, xenStoreDomainGetState) (xenStoreDomainReboot): Likewise. * src/xen/xend_internal.c (xenDaemonOpen, xenDaemonDomainReboot) (xenDaemonDomainCoreDump, xenDaemonDomainGetState) (xenDaemonDomainMigratePrepare, xenDaemonDomainSetVcpusFlags, xenDaemonDomainGetVcpusFlags, xenDaemonAttachDeviceFlags, xenDaemonDetachDeviceFlags): Likewise. (xenDaemonDomainGetXMLDesc): Prefer unsigned flags. * src/xen/xend_internal.h (xenDaemonDomainGetXMLDesc): Likewise. * src/xen/xm_internal.h (xenXMDomainGetXMLDesc): Likewise. * src/xen/xm_internal.c (xenXMDomainGetXMLDesc): Likewise. (xenXMOpen, xenXMDomainGetState, xenXMDomainSetVcpusFlags) (xenXMDomainGetVcpusFlags): Reject unknown flags. (xenXMDomainAttachDeviceFlags, xenXMDomainDetachDeviceFlags): Likewise, and avoid always-false conditional. * src/xen/xen_driver.h (XEN_MIGRATION_FLAGS): New define.
-
- 14 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The compiler might optimize based on our declaration that something is unused. Putting that declaration in the header risks getting out of sync with the actual implementation, so it belongs better only in the .c files. We were mostly compliant, and a new syntax check will help us in the future. * cfg.mk (sc_avoid_attribute_unused_in_header): New syntax check. * src/nodeinfo.h (nodeGetCPUStats, nodeGetMemoryStats): Delete attribute already present in .c file. * src/qemu/qemu_domain.h (qemuDomainEventFlush): Likewise. * src/util/virterror_internal.h (virReportErrorHelper): Parameters are actually used by .c file. * src/xenxs/xen_sxpr.h (xenFormatSxprDisk): Adjust prototype. * src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Delete unused argument. (xenFormatSxpr): Adjust caller. * src/xen/xend_internal.c (xenDaemonAttachDeviceFlags) (xenDaemonUpdateDeviceFlags): Likewise. Suggested by Daniel Veillard.
-
- 12 7月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
The drivers were accepting domain configs without checking if those were actually meant for them. For example the LXC driver happily accepts configs with type QEMU. Add a check for the expected domain types to the virDomainDefParse* functions.
-
- 08 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Now that the public APIs always use unsigned flags, the internal driver callbacks might as well do likewise. * src/driver.h (vrDrvOpen, virDrvDomainCoreDump) (virDrvDomainGetXMLDesc, virDrvNetworkGetXMLDesc) (virDrvNWFilterGetXMLDesc): Update type. * src/remote/remote_protocol.x (remote_open_args) (remote_domain_core_dump_args, remote_domain_get_xml_desc_args) (remote_network_get_xml_desc_args) (remote_nwfilter_get_xml_desc_args): Likewise. * src/test/test_driver.c: Update clients. * src/remote/remote_driver.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * src/xen/xen_hypervisor.h: Likewise. * src/xen/xen_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * src/xen/xend_internal.h: Likewise. * src/xen/xm_internal.c: Likewise. * src/xen/xm_internal.h: Likewise. * src/xen/xs_internal.c: Likewise. * src/xen/xs_internal.h: Likewise. * src/xen/xen_inotify.c: Likewise. * src/xen/xen_inotify.h: Likewise. * src/phyp/phyp_driver.c: Likewise. * src/openvz/openvz_driver.c: Likewise. * src/vmware/vmware_driver.c: Likewise. * src/vbox/vbox_driver.c: Likewise. * src/vbox/vbox_tmpl.c: Likewise. * src/xenapi/xenapi_driver.c: Likewise. * src/esx/esx_driver.c: Likewise. * src/esx/esx_interface_driver.c: Likewise. * src/esx/esx_network_driver.c: Likewise. * src/esx/esx_storage_driver.c: Likewise. * src/esx/esx_device_monitor.c: Likewise. * src/esx/esx_secret_driver.c: Likewise. * src/esx/esx_nwfilter_driver.c: Likewise. * src/interface/netcf_driver.c: Likewise. * src/nwfilter/nwfilter_driver.c: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/lxc/lxc_driver.c: Likewise. * src/uml/uml_driver.c: Likewise. * src/network/bridge_driver.c: Likewise. * src/secret/secret_driver.c: Likewise. * src/storage/storage_driver.c: Likewise. * src/node_device/node_device_hal.c: Likewise. * src/node_device/node_device_udev.c: Likewise. * src/remote_protocol-structs: Likewise.
-
- 07 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Most clients of virSkipSpaces don't want to omit backslashes. Also, open-coding the list of spaces is not as nice as using c_isspace. * src/util/util.c (virSkipSpaces): Use c_isspace. (virSkipSpacesAndBackslash): New function. * src/util/util.h (virSkipSpacesAndBackslash): New prototype. * src/xen/xend_internal.c (sexpr_to_xend_topology): Update caller. * src/libvirt_private.syms (util.h): Export new function.
-
- 27 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have a public virDomainPinVcpu, which implies that Pin and Vcpu are treated as separate words. Unreleased commit e261987c introduced virDomainGetVcpupinInfo as the first public API that used Vcpupin, although we had prior internal uses of that spelling. For consistency, change the spelling to be two words everywhere, regardless of whether pin comes first or last. * daemon/remote.c: Treat vcpu and pin as separate words. * include/libvirt/libvirt.h.in: Likewise. * src/conf/domain_conf.c: Likewise. * src/conf/domain_conf.h: Likewise. * src/driver.h: Likewise. * src/libvirt.c: Likewise. * src/libvirt_private.syms: Likewise. * src/libvirt_public.syms: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise. * src/remote/remote_protocol.x: Likewise. * src/remote_protocol-structs: Likewise. Suggested by Matthias Bolte.
-
- 23 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
See previous patch for why this is good... * src/xen/xen_driver.h (xenXMConfCache): Manage filename dynamically. * src/xen/xm_internal.c (xenXMConfigCacheAddFile) (xenXMConfigFree, xenXMDomainDefineXML): Likewise.
-
- 21 6月, 2011 1 次提交
-
-
由 Cole Robinson 提交于
Since we virEventRegisterDefaultImpl is now a public API, callers need a way to invoke the default registered Handle and Timeout functions. We already have general functions for these internally, so promote them to the public API. v2: Actually add APIs to libvirt.h
-
- 15 6月, 2011 1 次提交
-
-
由 Daniel Gollub 提交于
Introduce libvirt support for Xen HVM Viridian (Hyper-V) enlightenment interface guest feature. src/conf/domain_conf.c | 3 ++- src/conf/domain_conf.h | 1 + src/xen/xen_hypervisor.c | 11 +++++++++++ src/xenapi/xenapi_driver.c | 2 ++ src/xenapi/xenapi_utils.c | 2 ++ src/xenxs/xen_sxpr.c | 4 ++++ src/xenxs/xen_xm.c | 12 +++++++++++- 7 files changed, 33 insertions(+), 2 deletions(-)
-
- 29 5月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Well, the remaining drivers that already had the get/set scheduler parameter functionality to begin with. For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as the only supported operation for these 5 domains; it will take domain-specific patches if more specific behavior is preferred. * src/esx/esx_driver.c (esxDomainGetSchedulerParameters) (esxDomainSetSchedulerParameters): Move guts... (esxDomainGetSchedulerParametersFlags) (esxDomainSetSchedulerParametersFlags): ...to new functions. * src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters) (libxlDomainSetSchedulerParameters) (libxlDomainGetSchedulerParametersFlags) (libxlDomainSetSchedulerParametersFlags): Likewise. * src/lxc/lxc_driver.c (lxcGetSchedulerParameters) (lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags) (lxcSetSchedulerParametersFlags): Likewise. * src/test/test_driver.c (testDomainGetSchedulerParams) (testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags) (testDomainSetSchedulerParamsFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters) (xenUnifiedDomainSetSchedulerParameters) (xenUnifiedDomainGetSchedulerParametersFlags) (xenUnifiedDomainSetSchedulerParametersFlags): Likewise.
-
由 Eric Blake 提交于
Rather mechanical in nature. * src/driver.h: Use newer virTypedParameter API names. * src/libvirt.c: Likewise. * daemon/remote.c: Likewise. * src/esx/esx_driver.c: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/lxc/lxc_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/test/test_driver.c: Likewise. * src/xen/xen_driver.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * src/xen/xen_hypervisor.h: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise.
-
- 19 5月, 2011 3 次提交
-
-
由 Matthias Bolte 提交于
Add invalid argument checks for params and nparams to the public API and remove them from the drivers (e.g. xend). Add subset handling to libxl and test drivers.
-
由 Matthias Bolte 提交于
params and nparams are essential and cannot be NULL. Check this in libvirt.c and remove redundant checks from the drivers (e.g. xend). Instead of enforcing that nparams must point to exact same value as returned by virDomainGetSchedulerType relax this to a lower bound check. This is what some drivers (e.g. xen hypervisor and esx) already did. Other drivers (e.g. xend) didn't check nparams at all and assumed that there is enough space in params. Unify the behavior in all drivers to a lower bound check and update nparams to the number of valid values in params on success.
-
由 Matthias Bolte 提交于
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it before assigning to it, other drivers assumed it must be non-NULL (e.g. test and esx) and just assigned to it. Unify this to nparams being optional and document it.
-
- 18 5月, 2011 1 次提交
-
-
由 Cole Robinson 提交于
This error code has existed since the dawn of time, yet the messages it generates are almost universally busted. Here's a small sampling: src/conf/domain_conf.c:4889 : XML description for missing root element is not well formed or invalid src/conf/domain_conf.c:4951 : XML description for unknown device type is not well formed or invalid src/conf/domain_conf.c:5460 : XML description for maximum vcpus must be an integer is not well formed or invalid src/conf/domain_conf.c:5468 : XML description for invalid maxvcpus %(count)lu is not well formed or invalid Fix up the error code to instead be XML error: <msg> Adjust the few locations that were using the original correctly (or shouldn't have been using the error code at all). v2: Fix wording of error code without a passed argument
-
- 16 5月, 2011 4 次提交
-
-
由 Daniel P. Berrange 提交于
Add many version number annotations to the internal driver tables, to allow hvsupport.html to display more accurate information
-
由 Daniel P. Berrange 提交于
Change all the driver struct initializers to use the C99 style, leaving out unused fields. This will make it possible to add new APIs without changing every driver. eg change: qemudDomainResume, /* domainResume */ qemudDomainShutdown, /* domainShutdown */ NULL, /* domainReboot */ qemudDomainDestroy, /* domainDestroy */ to .domainResume = qemudDomainResume, .domainShutdown = qemudDomainShutdown, .domainDestroy = qemudDomainDestroy, And get rid of any existing C99 style initializersr which set NULL, eg change .listPools = vboxStorageListPools, .numOfDefinedPools = NULL, .listDefinedPools = NULL, .findPoolSources = NULL, .poolLookupByName = vboxStoragePoolLookupByName, to .listPools = vboxStorageListPools, .poolLookupByName = vboxStoragePoolLookupByName,
-
由 Daniel P. Berrange 提交于
Fix some driver names: s/virDrvCPUCompare/virDrvCompareCPU/ s/virDrvCPUBaseline/virDrvBaselineCPU/ s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/ s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/ s/virDrvSecretListSecrets/virDrvListSecrets/ And some driver struct field names: s/getFreeMemory/nodeGetFreeMemory/
-
由 Jiri Denemark 提交于
Reason is currently always set to 0 (i.e., *_UNKNOWN).
-