- 18 5月, 2011 2 次提交
-
-
由 Michal Privoznik 提交于
This typo caused XPath returning improper value and thus not working spice after migration.
-
由 Hu Tao 提交于
Support for virDomainSetSchedulerParametersFlags of qemu driver.
-
- 16 5月, 2011 21 次提交
-
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_migration.c: Add missing 'ret' initializer in qemuMigrationCookieXMLParseStr
-
由 Daniel P. Berrange 提交于
By running the doTunnelSendAll code in a separate thread, the main thread can do qemuMigrationWaitForCompletion as with normal migration. This in turn ensures that job signals work correctly and that progress monitoring can be done * src/qemu/qemu_migration.c: Run tunnelled migration in separate thread
-
由 Daniel P. Berrange 提交于
virStreamSend already sets an error message, so don't overwrite it * src/qemu/qemu_migration.c: Remove bogus error report
-
由 Daniel P. Berrange 提交于
Cancelling the QEMU migration may cause QEMU to flush pending data on the migration socket. This may in turn block QEMU if nothing reads from the other end of the socket. Closing the socket before cancelling QEMU migration avoids this possible deadlock. * src/qemu/qemu_migration.c: Close sockets before cancelling migration on failure
-
由 Daniel P. Berrange 提交于
The 'nbytes' variable was not re-initialized to the buffer size on each iteration of the tunnelled migration loop. While saferead() will ensure a full read, except on EOF, it is clearer to use the real buffer size * src/qemu/qemu_migration.c: Always read full buffer of data
-
由 Daniel P. Berrange 提交于
The doTunnelMigrate method forgot to set the bandwidth resource restriction * src/qemu/qemu_migration.c: Set resource restriction
-
由 Daniel P. Berrange 提交于
The qemuMigrationWaitForCompletion method contains a loop which repeatedly queries QEMU to check migration progress, and also processes job signals (pause, setspeed, setbandwidth, cancel). The tunnelled migration loop does not currently support this functionality, but should. Refactor the code to allow it to be used with tunnelled migration.
-
由 Daniel P. Berrange 提交于
Implement the v3 migration protocol, which has two extra steps, 'begin' on the source host and 'confirm' on the source host. All other methods also gain both input and output cookies to allow bi-directional data passing at all stages. The QEMU peer2peer migration method gains another impl to provide the v3 migration. This finally allows migration cookies to work with tunnelled migration, which is required for Spice seamless migration & the lock manager transfer * src/qemu/qemu_driver.c: Wire up migrate v3 APIs * src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add begin & confirm methods, and peer2peer impl of v3
-
由 Daniel P. Berrange 提交于
Merge the doNonTunnelMigrate2 and doTunnelMigrate2 methods into one doPeer2PeerMigrate2 method, since they are substantially the same. With the introduction of v3 migration, this will be even more important, to avoid massive code duplication. * src/qemu/qemu_migration.c: Merge tunnel & non-tunnel migration
-
由 Daniel P. Berrange 提交于
To facilitate the introduction of the v3 migration protocol, the doTunnelMigrate method is refactored into two pieces. One piece is intended to mirror the flow of virDomainMigrateVersion2, while the other is the helper for setting up sockets and processing the data. Previously socket setup would be done before the 'prepare' step, so errors could be dealt with immediately, avoiding need to shut off the destination QEMU. In the new split, socket setup is done after the 'prepare' step. This is not a serious problem, since the control flow already requires calling 'finish' to tear down the destination QEMU upon several errors. * src/qemu/qemu_migration.c:
-
由 Daniel P. Berrange 提交于
Use the graphics information from the QEMU migration cookie to issue a 'client_migrate_info' monitor command to QEMU. This causes the SPICE client to automatically reconnect to the target host when migration completes * src/qemu/qemu_migration.c: Set data for SPICE client relocation before starting migration on src * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add new qemuMonitorGraphicsRelocate() command
-
由 Daniel P. Berrange 提交于
Extend the QEMU migration cookie structure to allow information about the destination host graphics setup to be passed by to the source host. This will enable seamless migration of any connected graphics clients * src/qemu/qemu_migration.c: Add graphics info to migration cookies * daemon/libvirtd.c: Always initialize gnutls to enable x509 cert parsing in QEMU
-
由 Daniel P. Berrange 提交于
The migration protocol has support for a 'cookie' parameter which is an opaque array of bytes as far as libvirt is concerned. Drivers may use this for passing around arbitrary extra data they might need during migration. The QEMU driver needs to do a few things: - Pass hostname/uuid to allow strict protection against localhost migration attempts - Pass SPICE/VNC server port from the target back to the source to allow seamless relocation of client sessions - Pass lock driver state from source to destination This patch introduces the basic glue for handling cookies but only includes the host/guest UUID & name. * src/libvirt_private.syms: Export virXMLParseStrHelper * src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing and formatting of migration cookies * src/qemu/qemu_driver.c: Pass in cookie parameters where possible * src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change cookie max length to 16384 bytes
-
由 Daniel P. Berrange 提交于
The qemuMigrationPrepareTunnel method should not unlock the qemu driver, since that is the caller's job. * src/qemu/qemu_migration.c: Fix qemuMigrationPrepareTunnel unlocking of QEMU driver
-
由 Daniel P. Berrange 提交于
Add many version number annotations to the internal driver tables, to allow hvsupport.html to display more accurate information
-
由 Daniel P. Berrange 提交于
Change all the driver struct initializers to use the C99 style, leaving out unused fields. This will make it possible to add new APIs without changing every driver. eg change: qemudDomainResume, /* domainResume */ qemudDomainShutdown, /* domainShutdown */ NULL, /* domainReboot */ qemudDomainDestroy, /* domainDestroy */ to .domainResume = qemudDomainResume, .domainShutdown = qemudDomainShutdown, .domainDestroy = qemudDomainDestroy, And get rid of any existing C99 style initializersr which set NULL, eg change .listPools = vboxStorageListPools, .numOfDefinedPools = NULL, .listDefinedPools = NULL, .findPoolSources = NULL, .poolLookupByName = vboxStoragePoolLookupByName, to .listPools = vboxStorageListPools, .poolLookupByName = vboxStoragePoolLookupByName,
-
由 Daniel P. Berrange 提交于
Fix some driver names: s/virDrvCPUCompare/virDrvCompareCPU/ s/virDrvCPUBaseline/virDrvBaselineCPU/ s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/ s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/ s/virDrvSecretListSecrets/virDrvListSecrets/ And some driver struct field names: s/getFreeMemory/nodeGetFreeMemory/
-
由 Jiri Denemark 提交于
A qemu domain can get paused when libvirtd is stopped (e.g., because of I/O error) so we should check its current state when reconnecting to it.
-
由 Jiri Denemark 提交于
Only in drivers which use virDomainObj, drivers that query hypervisor for domain status need to be updated separately in case their hypervisor supports this functionality. The reason is also saved into domain state XML so if a domain is not running (i.e., no state XML exists) the reason will be lost by libvirtd restart. I think this is an acceptable limitation.
-
由 Jiri Denemark 提交于
Reason is currently always set to 0 (i.e., *_UNKNOWN).
-
由 Jiri Denemark 提交于
-
- 13 5月, 2011 5 次提交
-
-
由 Cole Robinson 提交于
v2: Drop libvirt_private.syms changes v3: Adjust for new virDomainEventStateNew argument
-
由 Cole Robinson 提交于
And update callers to actually respect the error
-
由 Michal Privoznik 提交于
* src/qemu/qemu_driver.c: new qemuDomainScreenshot() function * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Monitor command
-
由 Michal Privoznik 提交于
This is needed if we want to transfer a temporary file. If the transfer is done with iohelper, we might run into a race condition, where we unlink() file before iohelper is executed. * src/fdstream.c, src/fdstream.h, src/util/iohelper.c: Add new option * src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/storage/storage_driver.c, src/uml/uml_driver.c, src/xen/xen_driver.c: Expand existing function calls
-
由 Michal Privoznik 提交于
* src/driver.h: Stub code for new API * src/esx/esx_driver.c, src/libxl/libxl_driver.c, src/lxc/lxc_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, rc/remote/remote_driver.c, rc/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/vmware/vmware_driver.c, src/xen/xen_driver.c, src/xen/xen_driver.h, src/xen/xen_hypervisor.c, src/xen/xen_inotify.c, src/xen/xend_internal.c, src/xen/xm_internal.c, src/xen/xs_internal.c, src/xenapi/xenapi_driver.c: Add dummy entries in driver table for new APIs
-
- 12 5月, 2011 3 次提交
-
-
由 Eric Blake 提交于
We were 31/73 on whether to translate; since less than 50% translated and since VIR_INFO is less than VIR_WARN which also doesn't translate, this makes sense. * cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it falls between WARN and DEBUG. * daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess) (qemudDispatchServer): Adjust offenders. * daemon/remote.c (remoteDispatchAuthPolkit): Likewise. * src/network/bridge_driver.c (networkReloadIptablesRules) (networkStartNetworkDaemon, networkShutdownNetworkDaemon) (networkCreate, networkDefine, networkUndefine): Likewise. * src/qemu/qemu_driver.c (qemudDomainDefine) (qemudDomainUndefine): Likewise. * src/storage/storage_driver.c (storagePoolCreate) (storagePoolDefine, storagePoolUndefine, storagePoolStart) (storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML) (storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise. * src/util/bridge.c (brProbeVnetHdr): Likewise. * po/POTFILES.in: Drop src/util/bridge.c.
-
由 Lai Jiangshan 提交于
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead. How do these coversions works? The magic is using the gcc extension of ##. When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to avoid compile error. example: origin after CPP high_level_api("%d", a_int) low_level_api("%d", a_int) high_level_api("a string") low_level_api("a string") About 400 conversions. 8 special conversions: VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal) (for security) 6 conversions Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
由 Eric Blake 提交于
No syntactic effect; this merely silences some clang warnings. * src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Drop redundant ret=0 statement. * src/qemu/qemu_monitor_text.c (qemuMonitorTextDriveDel): Likewise.
-
- 11 5月, 2011 4 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce a virProcessKill function that can be safely called even when the job mutex is held. This allows virDomainDestroy to kill any VM even if it is asleep in a monitor job. The PID will die and the thread asleep on the monitor will then wake up releasing the job mutex. * src/qemu/qemu_driver.c: Kill process before using qemuProcessStop to ensure job is released * src/qemu/qemu_process.c: Add virProcessKill for killing off QEMU processes
-
由 Matthias Bolte 提交于
This matches the public API and helps to get rid of some special case code in the remote generator. Rename driver API functions and XDR protocol structs. No functional change included outside of the remote generator.
-
由 Lai Jiangshan 提交于
-
由 Lai Jiangshan 提交于
-
- 06 5月, 2011 5 次提交
-
-
由 Daniel P. Berrange 提交于
As well as taint warnings going to the main libvirt log, add taint warnings to the per-domain logfile Domain id=3 is tainted: high-privileges Domain id=3 is tainted: disk-probing Domain id=3 is tainted: shell-scripts Domain id=3 is tainted: custom-monitor * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Enhance qemuDomainTaint to also log to the domain logfile * src/qemu/qemu_driver.c: Pass -1 for logFD to taint methods to auto-append to logfile * src/qemu/qemu_process.c: Pass open logFD at startup for taint methods
-
由 Daniel P. Berrange 提交于
The qemuDomainAppendLog method allows writing a formatted string to the end of the domain logfile, optionally opening it if needed. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add qemuDomainAppendLog
-
由 Daniel P. Berrange 提交于
Move the qemuProcessLogReadFD and qemuProcessLogFD methods into qemu_domain.c, renaming them to qemuDomainCreateLog and qemuDomainOpenLog. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add qemuDomainCreateLog and qemuDomainOpenLog. * src/qemu/qemu_process.c: Remove qemuProcessLogFD and qemuProcessLogReadFD
-
由 Daniel P. Berrange 提交于
Wire up logging of VM tainting to the QEMU driver - If running QEMU as root user/group or without capabilities being cleared - If passing custom QEMU command line args - If issuing custom QEMU monitor commands - If using a network interface config with an associated shell script - If using a disk config relying on format probing The warnings, per-VM appear in the main libvirtd logs 11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: high-privileges 11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: disk-probing The taint flags are reset when the VM is stopped. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Helper APIs for logging taint warnings * src/qemu/qemu_driver.c: Log tainting with custom QEMU monitor commands and disk/net hotplug with unsupported configs * src/qemu/qemu_process.c: Log tainting at startup based on unsupported configs
-
由 Eric Blake 提交于
We already have virAsprintf, so picking a similar name helps for seeing a similar purpose. Furthermore, the prefix V before printf generally implies 'va_list', even though this variant was '...', and the old name got in the way of adding a new va_list version. global rename performed with: $ git grep -l virBufferVSprintf \ | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g' then revert the changes in ChangeLog-old.
-