Instead of finding the next clear bit by calling virBitmapGetBit
in a loop, use the virBitmapNextClearBit helper.

Commit 4bbe1029 fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:

  Unable to open control socket: Operation not permitted

To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.

This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244

As of bba93d40 all of our RPC objects are derived from
virObjectLockable. However, during rewrite some errors sneaked
in. For instance, the dispose functions to virNetClient and
virNetServerClient objects were not only freeing allocated
memory, but unlocking themselves. This is wrong. Object should
never disappear while locked.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

To prevent a confusion about missing chardev argument in qemu
command line add a note about that behavior into documentation.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129198Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1127045Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Now that all the code uses accessors, don't expose the structure
anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The API will iterate over the list of network object and remove
desired ones from it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

An accessor following pattern laid out by virDomainObjList* APIs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

An accessor following pattern laid out by virDomainObjList* APIs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit v1.2.4-52-gda879e59 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.

However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in

    cmd 9 target pid 2135544 not found

error messages to appear in sanlock.log whenever we start a new domain.

This patch avoids this useless check for freshly started domains.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit 5aee81a0 introduced a new test for disk-serial.  The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line.  To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Follow-up to the IOThread review on CPU affinity map manipulation:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

indicates that the GetEmulatorPinInfo could use similar algorithm adjustments
which is what this patch does.

Follow-up to the IOThread review on CPU affinity map manipulation:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

indicates that the GetVcpuPinInfo could use similar algorithm adjustments
which is what this patch does.

By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...

Based on review:

http://www.redhat.com/archives/libvir-list/2015-March/msg00294.html

Adjust how the cpumap and cpumaplen to be returned are generated

We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>.  It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):

  <devices>
    <emulator>/usr/bin/qemu</emulator>
    ...
    <panic>
    </panic>
  </devices>

Lets format "<panic/>" instead.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Delete .po files which contain zero translated strings. Refresh
the .pot file and pull down latest translations from Zanata.

When refreshing the libvirt.pot, it can be pushed to zanata
and .po files resynchonized using

 # cd po
 # rm libvirt.pot
 # make libvirt.pot
 # zanata-cli push
 # zanata-cli pull

Note there is no need for 'make update-po', as long as you do
a zanata push, immediately followed by zanata pull, as the
Zanata server will ensure the .po files downloaded match the
just pushed .pot file.

Note at time of writing, it is strongly recommended to only
use the zanata Java client binary (zanata-cli), and not the
python client binary (zanata). This is because the moderately
large size of the libvirt pot file is causing errors when the
python client tries to push, which have been known to result
in the loss of all translations on the server, as well as also
preventing uploading of .po files themselves :-(

Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.

$ virsh iothreadsinfo --help
  NAME
    iothreadsinfo - view domain IOThreads

  SYNOPSIS
    iothreadsinfo <domain> [--config] [--live] [--current]

  DESCRIPTION
    Returns basic information about the domain IOThreads.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

An active domain may return:

$ virsh iothreads $dom
 IOThread ID     CPU Affinity
---------------------------------------------------
  1               2
  2               3
  3               0

$ echo $?
0

For domains which don't have IOThreads the following is returned:

$ virsh iothreads $dom
No IOThreads found for the domain

$ echo $?
0

For domains which are not running the following is returned:

$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running

$ echo $?
1

Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:

$ virsh iothreads f18iothr --config
 IOThread ID     CPU Affinity
 ----------------------------
  1               2
  2               3
  3               0-1

$
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.

The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.

The config path will map each of the configured IOThreads and return
any configured iothreadspin data
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Implement the remote plumbing for virDomainGetIOThreadsInfo
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.

For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.

The API supports either the --live or --config flag, but not both.

Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user.  Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.  Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.

Remove unnecessary function virCompareLimitUlong.  The update of test
is to prevent the 0 to be miss-used as unlimited in future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Fix vshMemtuneGetSize to return correct value.  We can then decide
according that return code whether a parameter is present and valid or
not.  This will allow as to accept 0 as a valid value.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.

This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Move the TPM command line build code into its own function.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Implement virCommandPassFDGetFDIndex to determine the index a given
file descriptor will have when passed to the child process.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation.  When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags.  Remove this unneeded (and incorrect) code.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>