Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

切换分支/标签
  1. 02 5月, 2014 3 次提交
    • E
      util: new stricter unsigned int parsing · 7b045c8c
      由 Eric Blake 提交于 
      strtoul() is required to parse negative numbers as their
twos-complement positive counterpart.  But sometimes we want
to reject negative numbers.  Add new functions to do this.
The 'p' suffix is a mnemonic for 'positive' (technically it
also parses 0, but 'non-negative' doesn't lend itself to a
nice one-letter suffix).

* src/util/virstring.h (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New prototypes.
* src/util/virstring.c (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New functions.
* src/libvirt_private.syms (virstring.h): Export them.
* tests/virstringtest.c (testStringToLong): Test them.
Signed-off-by: NEric Blake <eblake@redhat.com>
      7b045c8c
    • E
      util: fix uint parsing on 64-bit platforms · f18c02ec
      由 Eric Blake 提交于 
      Commit f22b7899 called to light a long-standing latent bug: the
behavior of virStrToLong_ui was different on 32-bit platforms
than on 64-bit platforms.  Curse you, C type promotion and
narrowing rules, and strtoul specification.  POSIX says that for
a 32-bit long, strtol handles only 2^32 values [LONG_MIN to
LONG_MAX] while strtoul handles 2^33 - 1 values [-ULONG_MAX to
ULONG_MAX] with twos-complement wraparound for negatives.  Thus,
parsing -1 as unsigned long produces ULONG_MAX, rather than a
range error.  We WANT[1] this same shortcut for turning -1 into
UINT_MAX when parsing to int; and get it for free with 32-bit
long.  But with 64-bit long, ULONG_MAX is outside the range
of int and we were rejecting it as invalid; meanwhile, we were
silently treating -18446744073709551615 as 1 even though it
textually exceeds INT_MIN.  Too bad there's not a strtoui() in
libc that does guaranteed parsing to int, regardless of the size
of long.

The bug has been latent since 2007, introduced by Jim Meyering
in commit 5d254191 in the attempt to eradicate unsafe use of
strto[u]l when parsing ints and longs.  How embarrassing that we
are only discovering it now - so I'm adding a testsuite to ensure
that it covers all the corner cases we care about.

[1] Ideally, we really want the caller to be able to choose whether
to allow negative numbers to wrap around to their 2s-complement
counterpart, as in strtoul, or to force a stricter input range
of [0 to UINT_MAX] by rejecting negative signs; this will be added
in a later patch for all three int types.

This patch is tested on both 32- and 64-bit; the enhanced
virstringtest passes on both platforms, while virstoragetest now
reliably fails on both platforms instead of just 32-bit platforms.
That test will be fixed later.

* src/util/virstring.c (virStrToLong_ui): Ensure same behavior
regardless of platform long size.
* tests/virstringtest.c (testStringToLong): New function.
(mymain): Comprehensively test string to long parsing.
Signed-off-by: NEric Blake <eblake@redhat.com>
      f18c02ec
    • D
      Misc error reporting bugs in QEMU cli builder · dca027a9
      由 Daniel P. Berrange 提交于 
      A couple of places in the QEMU XML -> ARGV conversion code
raised an error but then forgot to return an error status
due to missing gotos. While fixing this also tweak style
of a couple of other error reports
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      dca027a9
  3. 01 5月, 2014 4 次提交
  5. 30 4月, 2014 6 次提交
  7. 29 4月, 2014 17 次提交
  9. 28 4月, 2014 5 次提交
  11. 27 4月, 2014 5 次提交
    • L
      network: centralize check for active network during interface attach · 34cc3b2f
      由 Laine Stump 提交于 
      The check for a network being active during interface attach was being
done individually in several places (by both the lxc driver and the
qemu driver), but those places were too specific, leading to it *not*
being checked when allocating a connection/device from a macvtap or
hostdev network.

This patch puts a single check in networkAllocateActualDevice(), which
is always called before the any network interface is attached to any
type of domain. It also removes all the other now-redundant checks
from the lxc and qemu drivers.

NB: the following patches are prerequisites for this patch, in the
case that it is backported to any branch:

  440beeb7 network: fix virNetworkObjAssignDef and persistence
  8aaa5b68 network: create statedir during driver initialization
  b9e95491 network: change location of network state xml files
  411c5486 network: set macvtap/hostdev networks active if their state
          file exists

This fixes:

  https://bugzilla.redhat.com/show_bug.cgi?id=880483
      34cc3b2f
    • L
      network: set macvtap/hostdev networks active if their state file exists · 411c5486
      由 Laine Stump 提交于 
      libvirt attempts to determine at startup time which networks are
already active, and set their active flags. Previously it has done
this by assuming that all networks are inactive, then setting the
active flag if the network has a bridge device associated with it and
that bridge device exists. This is not useful for macvtap and hostdev
based networks, since they do not use a bridge device.

Of course the reason that such a check had to be done was that the
presence of a status file in the network "stateDir" couldn't be
trusted as an indicator of whether or not a network was active. This
was due to the network driver mistakenly using
/var/lib/libvirt/network to store the status files, rather than
/var/run/libvirt/network (similar to what is done by every other
libvirt driver that stores status xml for its objects). The difference
is that /var/run is cleared out when the host reboots, so you can be
assured that the state file you are seeing isn't just left over from a
previous boot of the host.

Now that the network driver has been switched to using
/var/run/libvirt/network for status, we can also modify it to assume
that any network with an existing status file is by definition active
- we do this when reading the status file. To fine tune the results,
networkFindActiveConfigs() is changed to networkUpdateAllState(),
and only sets active = 0 if the conditions for particular network
types are *not* met.

The result is that during the first run of libvirtd after the host
boots, there are no status files, so no networks are active. Any time
libvirtd is restarted, any network with a status file will be marked
as active (unless the network uses a bridge device and that device for
some reason doesn't exist).
      411c5486
    • L
      network: change location of network state xml files · b9e95491
      由 Laine Stump 提交于 
      For some reason these have been stored in /var/lib, although other
drivers (e.g. qemu and lxc) store their state files in /var/run.

It's much nicer to store state files in /var/run because it is
automatically cleared out when the system reboots. We can then use
existence of the state file as a convenient indicator of whether or
not a particular network is active.

Since changing the location of the state files by itself will cause
problems in the case of a *live* upgrade from an older libvirt that
uses /var/lib (because current status of active networks will be
lost), the network driver initialization has been modified to migrate
any network state files from /var/lib to /var/run.

This will not help those trying to *downgrade*, but in practice this
will only be problematic in two cases

1) If there are networks with network-wide bandwidth limits configured
   *and in use* by a guest during a downgrade to "old" libvirt. In this
   case, the class ID's used for that network's tc rules, as well as
   the currently in-use bandwidth "floor" will be forgotten.

2) If someone does this: 1) upgrade libvirt, 2) downgrade libvirt, 3)
   modify running state of network (e.g. add a static dhcp host, etc),
   4) upgrade. In this case, the modifications to the running network
   will be lost (but not any persistent changes to the network's
   config).
      b9e95491
    • L
      network: create statedir during driver initialization · 8aaa5b68
      由 Laine Stump 提交于 
      This directory should be created when the network driver is first
started up, not just when a dhcp daemon is run. This hasn't posed a
problem in the past, because the directory has always been
pre-existing.
      8aaa5b68
    • L
      network: fix virNetworkObjAssignDef and persistence · 440beeb7
      由 Laine Stump 提交于 
      Experimentation showed that if virNetworkCreateXML() was called for a
network that was already defined, and then the network was
subsequently shutdown, the network would continue to be persistent
after the shutdown (expected/desired), but the original config would
be lost in favor of the transient config sent in with
virNetworkCreateXML() (which would then be the new persistent config)
(obviously unexpected/not desired).

To fix this, virNetworkObjAssignDef() has been changed to

1) properly save/free network->def and network->newDef for all the
various combinations of live/active/persistent, including some
combinations that were previously considered to be an error but didn't
need to be (e.g. setting a "live" config for a network that isn't yet
active but soon will be - that was previously considered an error,
even though in practice it can be very useful).

2) automatically set the persistent flag whenever a new non-live
config is assigned to the network (and clear it when the non-live
config is set to NULL). the libvirt network driver no longer directly
manipulates network->persistent, but instead relies entirely on
virNetworkObjAssignDef() to do the right thing automatically.

After this patch, the following sequence will behave as expected:

virNetworkDefineXML(X)
virNetworkCreateXML(X') (same name but some config different)
virNetworkDestroy(X)

At the end of these calls, the network config will remain as it was
after the initial virNetworkDefine(), whereas previously it would take
on the changes given during virNetworkCreateXML().

Another effect of this tighter coupling between a) setting a !live def
and b) setting/clearing the "persistent" flag, is that future patches
which change the details of network lifecycle management
(e.g. upcoming patches to fix detection of "active" networks when
libvirtd is restarted) will find it much more difficult to break
persistence functionality.
      440beeb7