Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Make the test driver only support the VIR_TYPED_PARAM_STRING flag for
now.
Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NIlias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

If the dup2 fails, then we aren't going to get the correct result.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Avoid the chance that sysconf(_SC_OPEN_MAX) returns -1 and thus
would cause virBitmapNew would attempt to allocate a very large
bitmap.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Avoid the chance that qemuMonitorTestNewSimple could return NULL

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

It's already dereffed in the initialization and shouldn't be NULL
unless virJSONValueArraySize after a virJSONValueObjectGetArray
could return a NULL data entry.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.

Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain

    error: invalid argument: Turn parallel migration on to tune it

even though --parallel-connections option was not used at all.

https://bugzilla.redhat.com/show_bug.cgi?id=1726643Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Report in logs when we don't find existing block job data and create it
just to handle the job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

While this function does start a block job in case when we'd not be able
to get our internal data for it, the handler sets the job state to
QEMU_BLOCKJOB_STATE_RUNNING anyways, thus qemuBlockJobStartupFinalize
would just unref the job.

Since the other usage of qemuBlockJobStartupFinalize in the other part
of the event handler was a bug replace this one anyways even if it would
not cause problems.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The block job event handler qemuProcessHandleBlockJob looks at the block
job data to see whether the job requires synchronous handling. Since the
block job event may arrive before we continue the job handling (if the
job has no data to copy) we could hit the state when the job is still
set as QEMU_BLOCKJOB_STATE_NEW (as we move it to the
QEMU_BLOCKJOB_STATE_RUNNING state only after returning from monitor).

If the event handler uses qemuBlockJobStartupFinalize it would
unregister and free the job. Thankfully this is not a big problem for
legacy blockjobs as we don't need much data for them but since we'd
re-instantiate the job data structure we'd report wrong job type for
active commit as qemu reports it as a regular commit job.

Fix it by not using qemuBlockJobStartupFinalize function in
qemuProcessHandleBlockJob as it is not starting the job anyways.

https://bugzilla.redhat.com/show_bug.cgi?id=1721375Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virCgroupRemove return -1 when removing cgroup failed.
But there are retry code to remove cgroup in QemuProcessStop:

 retry:
    if ((ret = qemuRemoveCgroup(vm)) < 0) {
        if (ret == -EBUSY && (retries++ < 5)) {
            usleep(200*1000);
            goto retry;
        }
        VIR_WARN("Failed to remove cgroup for %s",
                 vm->def->name);
    }

The return value of qemuRemoveCgroup will never be equal to "-EBUSY",
so change the return value of virCgroupRemove if failed.
Signed-off-by: NWang Yechao <wang.yechao255@zte.com.cn>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Shutting down the daemon after 30 seconds of being idle is a little bit
too aggressive. Especially when using 'virsh' in single-shot mode, as
opposed to interactive shell mode, it would not be unusual to have
more than 30 seconds between commands. This will lead to the daemon
shutting down and starting up between a series of commands.

Increasing the shutdown timer to 2 minutes will make it less likely that
the daemon will shutdown while the user is in the middle of a series of
commands.
Reviewed-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Instead of having each caller pass in the desired logfile name, pass in
the binary name instead. The logging code can then just derive a logfile
name by appending ".log".
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This adds detection of a Quobyte as a shared file system for live
migration.
Signed-off-by: NSilvan Kaiser <silvan@quobyte.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

We have two functions: virPCIDeviceAddressIsEqual() defined only
on Linux and virPCIDeviceAddressEqual() defined everywhere. And
both of them do the same. Drop the former in favour of the
latter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit 5ff46aaa added a new parameter but neglected to fix the NONNULL
declarations.
Reported-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

virPCIGetSysfsFile is conditionally compiled only on Linux platforms.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

When removing the disk fronted while any block job is still active we
need to transfer the ownership of the backing chain to the job itself as
the job still holds the reference to the chain members and thus attempts
to remove them would fail.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.

Add a helper for qemu to look also into the blockjob state.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.

This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.

The job state processing requires some care to figure out if a job
needs to be bumped.

For any invalid job try doing our best to cancel it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add the infrastructure to handle block job events in the -blockdev era.

Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.

To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

With blockdev we'll need to use the JOB_STATUS_CHANGE so gate the old
events by the blockdev capability.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.

First step is to note the name, type, state and corresponding disk into
the status XML.

We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The job data saved in the XML may be partially invalid e.g. if something
is missing. To prevent losing a domain with such a job add a flag to the
job data so that job APIs can ignore such a job and we can just cancel
it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>