- 07 1月, 2010 4 次提交
-
-
由 Adam Litke 提交于
The behavior for the qemu balloon device has changed. Formerly, a virtio balloon device was provided by default. Now, '-balloon virtio' must be specified on the command line to enable it. This patch causes libvirt to add '-balloon virtio' to the command line whenever the -balloon option is available. * src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and add "-baloon vitio" to qemu command when needed * tests/qemuhelptest.c: add the new flag for detection
-
由 David Allan 提交于
This patch removes the call to vol update after the volume build completes. The update call is currently meaningless anyway because the vol build is passed a copy of the definition, so the update result is thrown away. More importantly, if the user specified a selinux label for the volume, the update call results in a double free of the label * src/storage/storage_backend_fs.c: remove the update call
-
由 Diego Elio Pettenò 提交于
* python/Makefile.am: python modules are loaded at runtime so the static version is not needed, avoid building it
-
由 Matthew Booth 提交于
This change makes the 'info chardev' parser ignore any trailing whitespace on a line. This fixes a specific problem handling a '\r\n' line ending. * src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in 'info chardev' output.
-
- 06 1月, 2010 4 次提交
-
-
由 Jim Meyering 提交于
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): "Unref" the domain upon failure. Patch by Matthias Bolte.
-
由 Jim Meyering 提交于
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Don't call vboxDomainUndefine on a NULL "dom".
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemudDomainMigratePrepare2): Remove useless test of always-non-NULL uri_out parameter. Use ATTRIBUTE_NONNULL to inform tools.
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemudDomainAttachDevice): Call virCgroupDenyDevicePath only if cgroup is non-NULL.
-
- 05 1月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/openvz/openvz_conf.c (openvzLoadDomains): Avoid NULL deref of "dom".
-
- 28 12月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 24 12月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
-
- 23 12月, 2009 7 次提交
-
-
由 Daniel Veillard 提交于
upate of as.po bn_IN.po de.po es.po gu.po hi.po kn.po ml.po mr.po or.po pa.po pl.po ru.po ta.po te.po zh_CN.po and regeneration
-
由 Matthias Bolte 提交于
All other stateful drivers are linked directly to libvirtd instead of libvirt.so. Link the secret driver to libvirtd too. * daemon/Makefile.am: link the secret driver to libvirtd * daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks * src/Makefile.am: don't link the secret driver to libvirt.so * src/libvirt_private.syms: remove the secretRegister symbol
-
由 Matthias Bolte 提交于
MinGW's ld gives an error when trying to export undefined symbols.
-
由 Matthias Bolte 提交于
Alter the offending variable names to fix this.
-
由 Jiri Denemark 提交于
* src/Makefile.am src/cpu/cpu_map.c: rename in Makefile and in the cpu map loading code
-
由 Jiri Denemark 提交于
All the cpu code is part of libvirt library and it might be used by drivers which do not require libvirtd to be running.
-
由 Daniel Veillard 提交于
If using a remote access, sometimes an RPC entry point is not available, and currently we just end up with a raw: error: unknown procedure: xxx error, while this should be more cleanly reported as an unsupported entry point like for local access * src/remote/remote_driver.c: convert missing remote entry points into the unsupported feature error
-
- 22 12月, 2009 16 次提交
-
-
由 Olivier Fourdan 提交于
When querying about a domain from 0.3.3 (or RHEL 5.3) domain located on a 0.6.3 (RHEL-5) machine, the errors are not properly reported. This patch from Olivier Fourdan <ofourdan@redhat.com> , slightly modified to not change the semantic when the domain os details cannot be provided * src/xen/proxy_internal.c src/xen/xen_hypervisor.c: add some missing error reports
-
由 Matthias Bolte 提交于
Found while trying to cross-compile libvirt on Fedora 12 for Windows. gnulib redefines 'close' to 'close_used_without_including_unistd_h' in sys/socket.h if winsock2.h is present and unistd.h has not been included before sys/socket.h. Reorder some includes to fix this.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
ATTRIBUTE_SENTINEL was defined for GCC >= 4.0 only, resulting in compile errors when using GCC < 4.0.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Also backup and restore the original ctxt->node value in x86FeatureLoad.
-
由 Matthias Bolte 提交于
The option --with-sasl defaults to 'check', but an inverted test logic lets the SASL check fail with an error instead of disabling SASL. Fix the test logic so SASL support gets disabled if SASL is missing and --with-sasl is set to check.
-
由 Matthias Bolte 提交于
The testlogic for $PKG_CONFIG was inverted, checking for an empty string before using PKG_CHECK_MODULES. Use -x instead of -z and add an else branch to the if checking for $GNUTLS_FOUND = no to add -lgcrypt in case the GnuTLS libraries are detected by pkg-config.
-
由 Matthias Bolte 提交于
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave the lone JSON flag * src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but leave it disabled for now
-
由 Jiri Denemark 提交于
* src/qemu/qemu_conf.c: CPU models should be probed only if the a guest's XML contains CPU model, not each time a qemu command line is generated.
-
由 Daniel Veillard 提交于
-
由 Jiri Denemark 提交于
* libvirt.spec.in: embbed it in the main libvirt binary rpm
-
由 Jiri Denemark 提交于
* src/Makefile.am: install it in $(pkgdatadir) i.e. /usr/share/libvirt/ usually
-
由 Chris Lalancette 提交于
The Xen code for making HVM VT-d PCI passthrough attach and detach wasn't working properly: 1) In xenDaemonAttachDevice(), we were always trying to reconfigure a PCI passthrough device, even the first time we added it. This was because the code in virDomainXMLDevID() was not checking xenstore for the existence of the device, and always returning 0 (meaning that the device already existed). 2) In xenDaemonDetachDevice(), we were trying to use "device_destroy" to detach a PCI device. While you would think that is the right method to call, it's actually wrong for PCI devices. In particular, in upstream Xen (and soon in RHEL-5 Xen), device_configure is actually used to destroy a PCI device. To fix the attach problem I add a lookup into xenstore to see if the device we are trying to attach already exists. To fix the detach problem I change it so that for PCI detach (only), we use device_configure with the appropriate sxpr to do the detachment. * src/xen/xend_internal.c: don't use device_destroy for PCI devices and fix the other issues. * src/xen/xs_internal.c src/xen/xs_internal.h: add xenStoreDomainGetPCIID()
-
由 Daniel P. Berrange 提交于
The XML XPath for detecting JSON in the running VM statefile was wrong causing all VMs to get JSON mode enabled at libvirtd restart. In addition if a VM was running a JSON enabled QEMU once, and then altered to point to a non-JSON enabled QEMU later the 'monJSON' flag would not get reset to 0. * src/qemu/qemu_driver.c: Fix setting/detection of JSON mode
-
- 21 12月, 2009 4 次提交
-
-
由 Adam Litke 提交于
* tools/virsh.pod: Provide a basic mention of the dommemstat command in the virsh man page.
-
由 Daniel Veillard 提交于
As Paul Jenner pointed out all other statistics commands use the singular form * tools/virsh.c: rename dommemstats to dommemstat as well as function name and associated structures
-
由 Daniel P. Berrange 提交于
The code for connecting to a server tries each socket in turn until it finds one that connects. Unfortunately for TLS sockets if it connected, but failed TLS handshake it would treat that as a failure to connect, and try the next socket. This is bad, it should have reported the TLS failure immediately. $ virsh -c qemu://somehost.com/system error: unable to connect to libvirtd at 'somehost.com': Invalid argument error: failed to connect to the hypervisor $ ./tools/virsh -c qemu://somehost.com/system error: server certificate failed validation: The certificate hasn't got a known issuer. error: failed to connect to the hypervisor * src/remote/remote_driver.c: Stop trying to connect if the TLS handshake fails
-
由 Daniel Veillard 提交于
* src/qemu/qemu_driver.c: The 'if' statement is supposed to check return value of pci = pciGetDevice(conn, ...); , but check uses if (!dev), fix it
-
- 20 12月, 2009 2 次提交
-
-
由 Adam Litke 提交于
Enable virDomainMemoryStats in the python API. dom.memoryStats() will return a dictionary containing the supported statistics. A dictionary is required because the meaining of each quantity cannot be inferred from its index in a list. * python/generator.py: reenable bindings for this entry point * python/libvirt-override-api.xml python/libvirt-override.c: the generator can't handle this new function, add the new binding, and the XML description
-
由 Adam Litke 提交于
Define a new command 'dommemstats' to report domain memory statistics. The output format is inspired by 'domblkstat' and 'domifstat' and consists of tag/value pairs, one per line. The command can complete successfully and print no output if virDomainMemoryStats is supported by the driver, but not the guest operating system. Sample output: swap_in 0 swap_out 0 major_fault 54 minor_fault 58259 unused 487680 available 502472 All stats referring to a quantity of memory (eg. all above except major and minor faults) represent the quantity in KBytes. * tools/virsh.c: implements the new command
-