The XML config for a CDROM device can be without a source path,
indicating that there is no media present. Without this change
the libxl driver fails to start a guest in that case because
the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format
type and tries to stat the NULL pointer that gets passed on.

> libxl: error: libxl_device.c:265:libxl__device_disk_set_backend:
> Disk vdev=hdc failed to stat: (null): Bad address
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.

This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Check the bus, type of the source device (tcp vs. spicevmc)
and the device address visible in the guest.

https://bugzilla.redhat.com/show_bug.cgi?id=1035128

Without this, building an XFS pool on a formatted partition
fails with --overwrite.

https://bugzilla.redhat.com/show_bug.cgi?id=927172

For now 'virsh quit' action like this:
--------------------------------
[root@localhost /]# virsh quit
[root@localhost /]#
--------------------------------
And 'virsh exit' action:
--------------------------------
[root@localhost /]# virsh exit

[root@localhost /]#
--------------------------------
There is a small difference('/n') between them.
According to manual said:
       quit, exit
           quit this interactive terminal

And in the code they all called cmdQuit func,
They should get same actions.
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>

Commit 5b3492fa aimed to fix this and caught one error but exposed
another one.  When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent).  However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs.  I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When looking up a net device by a MAC and PCI address, it is possible
that we've got a match on the MAC address but failed to match the
PCI address.

In that case, outputting just the MAC address can be confusing.

Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=872028

Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
 message in both cases).

Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.

No need to spawn a child 'rm' process when we can do it ourselves.

* tests/virstoragetest.c (testCleanupImages): Use dedicated
helper.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently VolOpen notifies the user of a potentially non-fatal failure by
returning -2 and logging a VIR_WARN or VIR_INFO. Unfortunately most
callers treat -2 as fatal but don't actually report any message with
the error APIs.

Rename the VOL_OPEN_ERROR flag to VOL_OPEN_NOERROR. If NOERROR is specified,
we preserve the current behavior of returning -2 (there's only one caller
that wants this).

However in the default case, only return -1, and actually use the error
APIs. Fix up a couple callers as a result.

Coverity complains about a possible leak of seclabel if
!sec_managers[i]->drv->domainGenSecurityLabel is true
and the seclabel might be overwritten by the next iteration
of the loop.

This leak should never happen, because every security driver
has domainGenSecurityLabel defined.

A future patch will merge virStorageFileMetadata and virStorageSource,
but I found it easier to do if both structs use the same information
for tracking whether a source file needs encryption keys.

* src/util/virstoragefile.h (_virStorageFileMetadata): Prepare
full encryption struct instead of just a bool.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Use transfer semantics.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Populate struct.
(virStorageFileFreeMetadata): Adjust clients.
* tests/virstoragetest.c (testStorageChain): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that each virStorageSource can track allocation information,
and given that we already have the information without extra
syscalls, it's easier to just always populate the information
directly into the struct than it is to sometimes pass the address
of the struct members down the call chain.

* src/storage/storage_backend.h (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Always populate struct
members instead.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol): Update client.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile.  As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file.  This sets up the fields for
the tracking, although it does not modify XML to display any
new information.

* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.

A fairly smooth transition.  And now that domain disks and
storage volumes share a common struct, it opens the doors for
a future patch to expose more details in the XML for both
objects.

* src/conf/storage_conf.h (_virStorageVolTarget): Delete.
(_virStorageVolDef): Use common type.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolTargetDefFormat): Update clients.
* src/storage/storage_backend.h: Likewise.
* src/storage/storage_backend.c
(virStorageBackendDetectBlockVolFormatFD)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another step towards unification of structures.  While we might
not expose everything in XML via domain disk as we do for
storage volume pointer, both places want to deal with (at least
part of) the backing chain; therefore, moving towards a single
struct usable from both contexts will make the backing chain
code more reusable.

* src/conf/storage_conf.h (_virStoragePerms)
(virStorageTimestamps): Move...
* src/util/virstoragefile.h: ...here.
(_virStorageSource): Add more fields.
* src/util/virstoragefile.c (virStorageSourceClear): Clean
additional fields.
Signed-off-by: NEric Blake <eblake@redhat.com>

Some preparatory work before consolidating storage volume
structs with the rest of virstoragefile.  Making these
changes allows a volume target to be much closer to (a
subset of) the virStorageSource struct.

Making perms be a pointer allows it to be optional if we
have a storage pool that doesn't expose permissions in a
way we can access.  It also allows future patches to
optionally expose permissions details learned about a disk
image via domain <disk> listings, rather than just
limiting it to storage volume listings.

Disk partition types was only used by internal code to
control what type of partition to create when carving up
an MS-DOS partition table storage pool (and is not used
for GPT partition tables or other storage pools).  It was
not exposed in volume XML, and as it is more closely
related to extent information of the overall block device
than it is to the <target> information describing the host
file.  Besides, if we ever decide to expose it in XML down
the road, we can move it back as needed.

* src/conf/storage_conf.h (_virStorageVolTarget): Change perms to
pointer, enhance comments.  Move partition type...
(_virStorageVolSource): ...here.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolDefParseXML, virStorageVolTargetDefFormat): Update
clients.
* src/storage/storage_backend_fs.c (createFileDir): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateRaw, virStorageBackendCreateExecCommand)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskPartTypeToCreate): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that we have a dedicated type for representing a disk source,
we might as well parse and format directly into that type instead
of piecemeal into pointers to members of the type.

* src/conf/domain_conf.h (virDomainDiskSourceDefFormatInternal)
(virDomainDiskSourceDefParse): Rename...
(virDomainDiskSourceFormat, virDomainDiskSourceParse): ...and
compress signatures.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Rewrite to use common struct.
(virDomainDiskSourceDefFormat): Delete.
(virDomainDiskDefParseXML, virDomainDiskDefFormat): Update
callers.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotDiskDefFormat): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The phyp code claims that it wants a non-zero value, but actually
enforces a capacity of zero.  It has been this way since commit
ebc46fea in June 2010.  Bummer that it has my name as the committer
- I guess I should have been much more stubborn about not blindly
taking someone else's 1600-line patch.

* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Use correct
logic.
Signed-off-by: NEric Blake <eblake@redhat.com>

by moving qemuAgentCommand() after qemuAgentCheckError().
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

On all the places where qemuAgentComand() was called, we did a check
for errors in the reply.  Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.

So this patch makes the error-checking part of qemuAgentCommand()
itself, which:

 a) makes it look better,

 b) makes the check mandatory and, most importantly,

 c) checks for the errors if and only if it is appropriate.

This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL.  Having said that, it *should* fix the
following bug:

https://bugzilla.redhat.com/show_bug.cgi?id=1058149Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Noticed during my work on storage struct cleanups.

* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartBoundaries): Fix spelling errors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that we have a common struct, it's time to start using it!
Since external snapshots make a longer backing chain, it is
only natural to use the same struct for the file created by
the snapshot as what we use for <domain> disks.

* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Use common
struct instead of open-coded duplicate fields.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotAlignDisks)
(virDomainSnapshotDiskDefFormat)
(virDomainSnapshotDiskGetActualType): Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateSnapshotDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskGetSourceString)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/storage/storage_driver.c
(virStorageFileInitFromSnapshotDef): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.

* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: NEric Blake <eblake@redhat.com>

The only remaining reason that virt-login-shell was trying to
link against virstoragefile was because of a call to
virStorageFileFormatTypeToString when spawning a qemu-nbd
process - but setuid processes shouldn't be spawning qemu-nbd.

* src/util/virfile.c (virFileLoopDeviceAssociate)
(virFileNBDDeviceAssociate): Cripple in setuid builds.
* src/Makefile.am (libvirt_setuid_rpc_client_la_SOURCES):
Drop virstoragefile from the list.
Signed-off-by: NEric Blake <eblake@redhat.com>

The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code.  But for the setuid
virt-login-shell, we don't need to crawl backing chains.  It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.

* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.

The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h.  No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.

* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: NEric Blake <eblake@redhat.com>

This one is a relatively easy move.  We don't ever convert the
enum to or from strings (it is inferred from other elements in
the xml, rather than directly represented).

* src/conf/domain_conf.h (virDomainDiskSecretType): Move...
* src/util/virstoragefile.h (virStorageSecreteType): ...and
rename.
* src/conf/domain_conf.c (virDomainDiskSecretType): Drop unused
enum conversion.
(virDomainDiskAuthClear, virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_command.c (qemuGetSecretString): Likewise.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePoolAuth):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another struct being moved to util.  This one doesn't have as
much use yet, thankfully.

* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Encryption keys can be associated with each source file in a
backing chain; as such, this file belongs more in util/ where
it can be used by virstoragefile.h.

* src/conf/storage_encryption_conf.h: Rename...
* src/util/virstorageencryption.h: ...to this.
* src/conf/storage_encryption_conf.c: Rename...
* src/util/virstorageencryption.c: ...to this.
* src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES)
(UTIL_SOURCES): Update to new file names.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.h: Update client.
* src/conf/storage_conf.h: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another enum moved to util/, this time the fallout from renaming
is not quite as large.

* src/conf/domain_conf.h (virDomainDiskProtocol): Move...
* src/util/virstoragefile.h (virStorageNetProtocol): ...and
rename.
* src/conf/domain_conf.c: Update clients.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/storage/storage_backend.c: Likewise.
* src/storage/storage_backend_gluster.c: Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

A continuation of the migration of disk details to virstoragefile.
This patch moves a single enum, but converting the name has quite
a bit of fallout.

* src/conf/domain_conf.h (virDomainDiskType): Move...
* src/util/virstoragefile.h (virStorageType): ...and rename.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Update clients.
* src/conf/domain_conf.c (virDomainDiskSourceDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefFormat, virDomainDiskGetActualType)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Likewise.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDiskDefFormat):
Likewise.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Likewise.
* src/locking/domain_lock.c (virDomainLockManagerAddDisk):
Likewise.
* src/lxc/lxc_controller.c
(virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/parallels/parallels_driver.c (parallelsGetHddInfo):
Likewise.
* src/phyp/phyp_driver.c (phypDiskType): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuTranslateDiskSourcePool)
(qemuTranslateSnapshotDiskSourcePool): Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDetermineDiskChain): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalBackingActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/security/security_apparmor.c
(AppArmorRestoreSecurityImageLabel)
(AppArmorSetSecurityImageLabel): Likewise.
* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
* src/storage/storage_backend.c (virStorageFileBackendForType):
Likewise.
* src/storage/storage_backend_fs.c (virStorageFileBackendFile)
(virStorageFileBackendBlock): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageFileBackendGluster): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives)
(vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Likewise.
* src/vmware/vmware_conf.c (vmwareVmxPath): Likewise.
* src/vmx/vmx.c (virVMXParseDisk, virVMXFormatDisk)
(virVMXFormatFloppy): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr)
(xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Continuing the refactoring of host-side storage descriptions out
of conf/domain_conf and into util/virstoragefile, this patch
focuses on details about a host name/port/transport as used by
a network storage volume.

* src/conf/domain_conf.h (virDomainDiskProtocolTransport)
(virDomainDiskHostDef, virDomainDiskHostDefClear)
(virDomainDiskHostDefFree, virDomainDiskHostDefCopy): Move...
* src/util/virstoragefile.h (virStorageNetHostTransport)
(virStorageNetHostDef, virStorageNetHostDefClear)
(virStorageNetHostDefFree, virStorageNetHostDefCopy): ...here,
with better names.
* src/util/virstoragefile.c (virStorageNetHostDefClear)
(virStorageNetHostDefFree, virStorageNetHostDefCopy): Moved from...
* src/conf/domain_conf.c (virDomainDiskHostDefClear)
(virDomainDiskHostDefFree, virDomainDiskHostDefCopy): ...here.
(virDomainDiskSourceDefClear, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal): Adjust callers.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost)
(qemuParseDriveURIString, qemuParseNBDString)
(qemuBuildNetworkDriveURI, qemuParseCommandLineDisk)
(qemuParseCommandLine, qemuGetDriveSourceString): Likewise.
* src/qemu/qemu_command.h: Likewise.
* src/qemu/qemu_conf.c (qemuAddISCSIPoolSourceHost)
(qemuTranslateDiskSourcePool): Likewise.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageFileBackendGlusterInit): Likewise.
* src/storage/storage_driver.c (virStorageFileFree)
(virStorageFileInitInternal): Likewise.
* src/storage/storage_driver.h (_virStorageFile): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/.  This starts the process, by first moving the
security label structures.

* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: NEric Blake <eblake@redhat.com>

In 'make syntax-check', we have a rule that prevents layering
violations between the various files in src.  However, we
forgot to treat conf/ and the more recently-added access/ as
lower-level directories, and were not detecting cases where
they might have used a driver file.  Also, it's not nice that
qemu can use storage/ but none of the other drivers could do so.

* cfg.mk (sc_prohibit_cross_inclusion): Tighten rules for conf/
and access/, let all other drivers use storage/.
Signed-off-by: NEric Blake <eblake@redhat.com>

Use the previously implemented function to lookup glusterfs source pools
for the netfs pool to lookup native gluster pools too.

https://bugzilla.redhat.com/show_bug.cgi?id=1072714

Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.

Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.

Extract the NFS related stuff into a separate function and tidy up the
rest of the code so we can reuse it to add gluster backend detection.

Additionally avoid reporting of errors from "showmount" and return an
empty source list instead. This will help when adding other detection
backends.

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>