Strings "file" and "context" may not be freed if "VIR_EXPAND_N" fails
and it leads into memory leak.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

A "xmlstr" string may not be assigned into a "doc" pointer and it
could cause memory leak. To fix it if the "doc" pointer is NULL and
the "xmlstr" string is not assigned we should free it.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There could be a memory leak caused by "managed_system" string, if any
error occurs before "managed_system" is assigned into
"phyp_driver->managed_system". The "managed_system" string wouldn't be
freed at all. The better way is to free the "managed_system" instead
of the one assigned in the "phyp_driver".

This has been found by coverity.

Pointed out by John, that the "phyp_driver->xmlopt" needs to be
unreferenced as well.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If there is no error while executing a function "openvzParseBarrierLimit"
a "str" string where is duplicate of a "value" string isn't freed and it
leads into memory leak.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

I ran 'git add .' for a patch in progress, while in the middle
of running 'make check' to test my work, and was surprised when
it picked up some files I wasn't expecting.

* .gitignore: Ignore *.pem.
Signed-off-by: NEric Blake <eblake@redhat.com>

While running objecteventtest, it was found that valgrind pointed out the
following memory leak:

==125== 538 (56 direct, 482 indirect) bytes in 1 blocks are definitely lost in loss record 216 of 226
==125==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==125==    by 0x4C65D8D: virAllocVar (viralloc.c:558)
==125==    by 0x4C9F055: virObjectNew (virobject.c:190)
==125==    by 0x4D2B2E8: virGetDomain (datatypes.c:220)
==125==    by 0x4D79180: testDomainDefineXML (test_driver.c:2962)
==125==    by 0x4D4977D: virDomainDefineXML (libvirt.c:8512)
==125==    by 0x4029C2: testDomainCreateXMLMixed (objecteventtest.c:226)
==125==    by 0x403A21: virtTestRun (testutils.c:138)
==125==    by 0x4021C2: mymain (objecteventtest.c:549)
==125==    by 0x4040C2: virtTestMain (testutils.c:593)
==125==    by 0x341F421A04: (below main) (libc-start.c:225)
Signed-off-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1047577

When writing commit 173c2914, I missed the fact virNetServerClientClose
unlocks the client object before actually clearing client->sock and thus
it is possible to hit a window when client->keepalive is NULL while
client->sock is not NULL. I was thinking client->sock == NULL was a
better check for a closed connection but apparently we have to go with
client->keepalive == NULL to actually fix the crash.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

On my Fedora 20 box with mingw cross-compiler, the build failed with:

../../src/rpc/virnetclient.c: In function 'virNetClientSetTLSSession':
../../src/rpc/virnetclient.c:745:14: error: unused variable 'oldmask' [-Werror=unused-variable]
     sigset_t oldmask, blockedsigs;
              ^

I traced it to the fact that mingw64-winpthreads installs a header
that does #define pthread_sigmask(...) 0, which means any argument
only ever passed to pthread_sigmask is reported as unused.  This
patch works around the compilation failure, with behavior no worse
than what mingw already gives us regarding the function being a
no-op.

* configure.ac (pthread_sigmask): Probe for broken mingw macro.
* src/util/virutil.h (pthread_sigmask): Rewrite to something that
avoids unused variables.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1047577

When a client closes its connection to libvirtd early during
virConnectOpen, more specifically just after making
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call to check if
VIR_DRV_FEATURE_PROGRAM_KEEPALIVE is supported without even waiting for
the result, libvirtd may crash due to a race in keep-alive
initialization. Once receiving the REMOTE_PROC_CONNECT_SUPPORTS_FEATURE
call, the daemon's event loop delegates it to a worker thread. In case
the event loop detects EOF on the connection and calls
virNetServerClientClose before the worker thread starts to handle
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call, client->keepalive will be
disposed by the time virNetServerClientStartKeepAlive gets called from
remoteDispatchConnectSupportsFeature. Because the flow is common for
both authenticated and read-only connections, even unprivileged clients
may cause the daemon to crash.

To avoid the crash, virNetServerClientStartKeepAlive needs to check if
the connection is still open before starting keep-alive protocol.

Every libvirt release since 0.9.8 is affected by this bug.

Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When idmap was added to LXC, we forgot to cover it in the testsuite.
The schema was missing an <element> layer, and as a result,
virt-xml-validate was failing on valid dumpxml output.

Reported by Eduard - Gabriel Munteanu on IRC.

* docs/schemas/domaincommon.rng (idmap): Include <idmap> element,
and support interleaves.
* tests/lxcxml2xmldata/lxc-idmap.xml: New file.
* tests/lxcxml2xmltest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

Include the name of the storage backend in the error message instead of
just the number.

Change code ordering to avoid the need for a forward declaration.

The comment was talking about creating the pool while the function is
deleting it. Fix the mismatch.

Ever since commit 61ac8ce0, Coverity complained about
remoteNetworkBuildEventLifecycle not checking for NULL failure
to build an event, compared to other calls in the code base.
But the problem is latent from copy and paste; all 17 of our
remote*BuildEvent* functions in remote_driver.c have the same
issue - if an OOM causes an event to not be built, we happily
pass NULL to remoteEventQueue(), but that function has marked
event as a nonnull parameter.  We were getting lucky (the
event queue's first use of the event happened to be a call to
virIsObjectClass(), which acts gracefully on NULL, so there
was no way to crash); but this is a latent bug waiting to bite
us due to the disregard for the nonnull attribute, as well as
a waste of resources in the event queue.  Better is to just
refuse to queue NULL.  The discard is silent, since the problem
only happens on OOM, and since events are already best effort -
if we fail to get an event, it's not like we have any memory
left to report the issue, nor any idea of who would benefit
from knowing we couldn't create or queue the event.

* src/remote/remote_driver.c (remoteEventQueue): Ignore NULL event.
Signed-off-by: NEric Blake <eblake@redhat.com>

Our fixes for CVE-2013-4400 were so effective at "fixing" bugs
in virt-login-shell that we ended up fixing it into a useless
do-nothing program.

Commit 3e2f27e1 picked the name LIBVIRT_SETUID_RPC_CLIENT for
the witness macro when we are doing secure compilation.  But
commit 9cd6a57d checked whether the name IN_VIRT_LOGIN_SHELL,
from an earlier version of the patch series, was defined; with
the net result that virt-login-shell invariably detected that
it was setuid and failed virInitialize.

Commit b7fcc799 closed all fds larger than stderr, but in the
wrong place.  Looking at the larger context, we mistakenly did
the close in between obtaining the set of namespace fds, then
actually using those fds to switch namespace, which means that
virt-login-shell will ALWAYS fail.

This is the minimal patch to fix the regressions, although
further patches are also worth having to clean up poor
semantics of the resulting program (for example, it is rude to
not pass on the exit status of the wrapped program back to the
invoking shell).

* tools/virt-login-shell.c (main): Don't close fds until after
namespace swap.
* src/libvirt.c (virGlobalInit): Use correct macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

The existing check of domain snapshots validated that they
point to a domain, but did not validate that the domain
points to a connection, even though any errors blindly assume
the connection is valid.  On the other hand, as mentioned in
commit 6e130ddc, any valid domain is already tied to a valid
connection, and VIR_IS_SNAPSHOT vs. VIR_IS_DOMAIN_SNAPSHOT
makes no real difference; it's best to just validate the chain
of all three.  For consistency with previous patches, continue
the trend of using a common macro.  For now, we don't need
virCheckDomainSnapshotGoto().

* src/datatypes.h (virCheckDomainSnapshotReturn): New macro.
(VIR_IS_SNAPSHOT, VIR_IS_DOMAIN_SNAPSHOT):
Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibDomainSnapshotError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

While all errors related to invalid nwfilters appeared to be
consistent, we might as well continue the trend of using a
common macro.  As in commit 6e130ddc, the difference between
VIR_IS_NWFILTER and VIR_IS_CONNECTED_NWFILTER is moot, since
reference counting means any valid nwfilter is also tied to
a valid connection.  For now, we don't need virCheckNWFilterGoto().

* src/datatypes.h (virCheckNWFilterReturn): New macro.
(VIR_IS_NWFILTER, VIR_IS_CONNECTED_NWFILTER): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNWFilterError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

For streams validation, we weren't consistent on whether to
use VIR_FROM_NONE or VIR_FROM_STREAMS.  Furthermore, in many
API, we want to ensure that a stream is tied to the same
connection as the other object we are operating on; while
other API failed to validate the stream at all.  And the
difference between VIR_IS_STREAM and VIR_IS_CONNECTED_STREAM
is moot; as in commit 6e130ddc, we know that reference
counting means a valid stream will always be tied to a valid
connection.  Similar to previous patches, use a common macro
to make it nicer.

* src/datatypes.h (virCheckStreamReturn, virCheckStreamGoto):
New macros.
(VIR_IS_STREAM, VIR_IS_CONNECTED_STREAM): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStreamError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

While all errors related to invalid secrets appeared to be
consistent, we might as well continue the trend of using a
common macro.  Just as in commit 6e130ddc, the difference
between VIR_IS_SECRET and VIR_IS_CONNECTED_SECRET is moot
(due to reference counting, any valid secret must be tied to
a valid domain).  For now, we don't need virCheckSecretGoto().

* src/datatypes.h (virCheckSecretReturn): New macro.
(VIR_IS_SECRET, VIR_IS_CONNECTED_SECRET): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibSecretError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

While all errors related to invalid node device appeared to be
consistent, we might as well continue the trend of using a
common macro.  For now, we don't need virCheckNodeDeviceGoto().

* src/datatypes.h (virCheckNodeDeviceReturn): New macro.
(VIR_IS_NODE_DEVICE, VIR_IS_CONNECTED_NODE_DEVICE): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNodeDeviceError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

The commit cad3cf9a introduced a crash
due to wrong order of parameters being passed to the function.  When
deleting an element, the function decreased the iterator instead of
count and if listing volumes after that (or undefining the pool, NULL
was being dereferenced.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Yet another advice appeared on the Multiqueue wiki page:

http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature

We should add vectors=N onto the qemu command line, where
N = 2 * (number of queues) + 1.

For storage volume validation, we weren't consistent on
whether to use VIR_FROM_NONE or VIR_FROM_STORAGE.  Similar
to previous patches, use a common macro to make it nicer.
Furthermore, just as in commit 6e130ddc, the difference
between VIR_IS_STORAGE_VOL and VIR_IS_CONNECTED_STORAGE_VOL
is moot (due to reference counting, any valid volume must
be tied to a valid connection).

virStorageVolCreateXMLFrom allows cross-connection cloning,
where the error is reported against the connection of the
destination pool.

* src/datatypes.h (virCheckStorageVolReturn)
(virCheckStorageVolGoto): New macros.
(VIR_IS_STORAGE_VOL, VIR_IS_CONNECTED_STORAGE_VOL): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStorageVolError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

We point to the manpages where available and redirect to libvirt's
homepage as a last resort.

This basically reverts commit ba64b971
"libxl: Allow libxl to set NIC devid". However assigning devid's
before calling libxlMakeNic does not work as that is calling
libxl_device_nic_init which sets it back to -1.
Right now auto-assignment only works in the hotplug case. But even if
that would be fixed at some point (if that is possible at all), this
would add a weird dependency between Xen and libvirt versions.
The change here should accept any auto-assignment that makes it into
libxl_device_nic_init. My understanding is that a caller always is
allowed to make the devid choice itself. And assuming libxlMakeNicList
is only used on domain creation, a sequential numbering should be ok.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

virStoragePoolBuild reported an invalid pool as if it were an
invalid network.  Likewise, we weren't consistent on whether to
use VIR_FROM_NONE or VIR_FROM_STORAGE.  Similar to previous
patches, use a common macro to make it nicer.  Furthermore, just
as in commit 6e130ddc, the difference between VIR_IS_STORAGE_POOL
and VIR_IS_CONNECTED_STORAGE_POOL is moot (due to reference
counting, any valid pool must be tied to a valid connection).
For now, we don't need virCheckStoragePoolGoto().

* src/datatypes.h (virCheckStoragePoolReturn): New macro.
(VIR_IS_STORAGE_POOL, VIR_IS_CONNECTED_STORAGE_POOL): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStoragePoolError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

There is no easy way to test authentication against libvirt.  This
commit modifies the test driver to allow simple username/password
authentication.

You modify the test XML by adding:

 <node>
   ...
   <auth>
     <user password="123456">rich</user>
     <user>jane</user>
   </auth>
 </node>

If there are any /node/auth/user elements, then authentication is
required by the test driver (if none are present, then the test driver
will work as before and not require authentication).

In the example above, two phony users are added:

 rich  password: 123456
 jane  no password required

The test driver will demand a username.  If the password attribute is
present (or if the username entered is wrong), then the password is
also asked for and checked:

 $ virsh -c test://$(pwd)/testnode.xml list
 Enter username for localhost: rich
 Enter rich's password for localhost: ***
  Id    Name                           State
 ----------------------------------------------------
  1     fv0                            running
  2     fc4                            running
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

When checking for a valid interface, we weren't consistent on
whether we reported as VIR_FROM_NONE or VIR_FROM_INTERFACE.
Similar to previous patches, use a common macro to make it nicer.
Furthermore, just as in commit 6e130ddc, the difference between
VIR_IS_INTERFACE and VIR_IS_CONNECTED_INTERFACE is moot (due to
reference counting, any valid interface must be tied to a valid
connection).  For now, we don't need virCheckInterfaceGoto().

* src/datatypes.h (virCheckInterfaceReturn): New macro.
(VIR_IS_INTERFACE, VIR_IS_CONNECTED_INTERFACE): Drop unused
macros.
* src/libvirt.c: Use macro throughout.
(virLibInterfaceError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit cfd62c1f was incomplete; I found more cases where error
messages were being overwritten, and where the code between
the three registration/deregistration APIs was not consistent.

Since it is fairly easy to trigger an attempt to deregister an
unregistered object through public API, I also changed the error
message from VIR_ERR_INTERNAL_ERROR to VIR_ERR_INVALID_ARG.

* src/conf/object_event.c (virObjectEventCallbackListEventID):
Inline...
(virObjectEventStateEventID): ...into lone caller, and report
error on failure.
(virObjectEventCallbackListAddID, virObjectEventStateCallbackID)
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Tweak error category.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister):
Don't leak registration on failure.
(remoteConnectDomainEventDeregisterAny)
(remoteConnectNetworkEventDeregisterAny): Don't overwrite error.
Signed-off-by: NEric Blake <eblake@redhat.com>

When checking for a valid network, we weren't consistent on
whether we reported an invalid network or a connection.  Similar
to previous patches such as commit 6e130ddc, the difference
between VIR_IS_NETWORK and VIR_IS_CONNECTED_NETWORK is moot (due
to reference counting, any valid network must be tied to a valid
connection).  Use a common macro to make the error reporting
for invalid networks nicer.

* src/datatypes.h (virCheckNetworkReturn, virCheckNetworkGoto): New
macros.
(VIR_IS_NETWORK, VIR_IS_CONNECTED_NETWORK): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNetworkError): Drop unused macro.
Signed-off-by: NEric Blake <eblake@redhat.com>

Like commit 94a26c7e from Eric Blake, the old fuzzy code should
be replaced by the new array management macros now.

And the type of scsi->count should be changed into "size_t", and
thus virSCSIDeviceListCount should return size_t instead, similar
for vir{PCI,USB}DeviceListCount.

Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

the unix socket /var/run/libvirt/lxc/domain.sock is not created
under the selinux context which configured by <seclabel>.

If we try to connect the domain.sock under the selinux context
of domain in virtLXCProcessConnectMonitor,selinux will deny
this connect operation.

type=AVC msg=audit(1387953696.067:662): avc:  denied  { connectto } for  pid=21206 comm="libvirtd" path="/usr/local/var/run/libvirt/lxc/systemd.sock" scontext=unconfined_u:system_r:svirt_lxc_net_t:s0:c770,c848 tcontext=unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023 tclass=unix_stream_socket

fix this problem by creating socket under selinux context of domain.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>