- 20 5月, 2020 2 次提交
-
-
由 Peter Krempa 提交于
qemuxml2argv test suite is way more comprehensive than the hotplug suite. Since we share the code paths for monitor and command line hotplug we can easily test the properties of devices against the QAPI schema. To achieve this we'll need to skip the JSON->commandline conversion for the test run so that we can analyze the pure properties. This patch adds flags for the comand line generator and hook them into the JSON->commandline convertor for -netdev. An upcoming patch will make use of this new infrastructure. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Peter Krempa 提交于
There are multiple steps of setting up the domain definition prior to formatting the command line for the tests. Extract it to a separate function so that it's self-contained and also will allow re-running the command line formatting which will be necessary for QMP schema validation tests. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 13 5月, 2020 1 次提交
-
-
由 Ján Tomko 提交于
This is not yet supported by virtiofsd. Fixes #23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 12 5月, 2020 4 次提交
-
-
由 Peter Krempa 提交于
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as virtio. Add a test case for proving that upcoming changes to handling of 'sd' work. This config was also tested with real qemu and the qemu process starts correctly. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Previously we've validated it in qemuCheckDiskConfig which was directly called from the command line generator. Move the checks to the validator where they belong. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev case for 'disk-discard' as we had it before. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped us formatting the tunning parameters on the command line let's also add version cases for qemu-4.1 data which doesn't enable blockdev. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 08 5月, 2020 2 次提交
-
-
qemu:///embed由 Andrea Bolognani 提交于
Turns out that it's not enough to pass the qemu:///embed root to virQEMUDriverConfigNew(), you also have to make sure the same string is copied into the virQEMUDriver structure yourself, and not doing so in our case resulted in the cleanup never happening and in distcheck failing because of that. On the other hand, actually setting config->embeddedRoot would result in different paths being generated for each test run, which would obviously break qemuxml2argvtest, so that's not an option either. This reverts commit d98cc196. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
qemu:///embed由 Andrea Bolognani 提交于
Now that the QEMU driver natively supports storing all its runtime data inside an arbitrary directory, we can avoid having multiple copies of the same logic in the test suite. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 05 5月, 2020 1 次提交
-
-
由 Michal Privoznik 提交于
Instead of the following pattern: type ret; ... ret = func(); return ret; we can use: return func() directly. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
- 27 4月, 2020 6 次提交
-
-
由 Bjoern Walk 提交于
Move capability validation of virtio options from command line generation to post-parse device validation where it belongs. Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Bjoern Walk 提交于
Add separate tests for individual options and devices for virtio-options to have the ability to do more fine-granular testing of various combinations. Also, add negative tests for unavailable capabilities. Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Bjoern Walk 提交于
Convert the virtio-options test in qemuxml2argv and qemuxml2xml to use the latest available QEMU capabilities. Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Daniel Henrique Barboza 提交于
This patch adds the implementation of the IBS pSeries feature, using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added in the previous patch. IBS can have the following values: "broken", "workaround", "fixed-ibs", "fixed-ccd" and "fixed-na". This is the XML format for the cap: <features> <ibs value='fixed-ibs'/> </features> Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel Henrique Barboza 提交于
This patch adds the implementation of the SBBC pSeries feature, using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added in the previous patch. Like the previously added CFPC feature, SBBC can have the values "broken", "workaround" or "fixed". Extra code is required to handle it since it's not a regular tristate capability. This is the XML format for the cap: <features> <sbbc value='workaround'/> </features> Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel Henrique Barboza 提交于
This patch adds the implementation of the CFPC pSeries feature, using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added in the previous patch. CPFC can have the values "broken", "workaround" or "fixed". Extra code is required to handle it since it's not a regular tristate capability. This is the XML format for the cap: <features> <cfpc value='workaround'/> </features> Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 4月, 2020 1 次提交
-
-
由 Han Han 提交于
Signed-off-by: NHan Han <hhan@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
- 13 4月, 2020 1 次提交
-
-
由 Laine Stump 提交于
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its <target> subelement, and if the qemu binary supports the hotplug=false option, then it will be added to the commandline for the pcie controller. This controller will then not allow any hotplug/unplug of devices while the guest is running (and the hotplug capability won't be advertised to the guest OS, so the guest OS also won't present unplugging of PCI devices as an option). <controller type='pci' model='pcie-root-port'> <target hotplug='off'/> </controller> For any PCI controllers other than pcie-downstream-port and pcie-root-port, of for qemu binaries that don't support the hotplug commandline option, an error will be logged during validation. Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 08 4月, 2020 1 次提交
-
-
由 Bjoern Walk 提交于
Pass the packed option on the QEMU command line of the capability for packed virtqueues is detected and the parameter is set explicitly. Reviewed-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 06 4月, 2020 1 次提交
-
-
由 Christian Schoenebeck 提交于
This option prevents misbehaviours on guest if a qemu 9pfs export contains multiple devices, due to the potential file ID collisions this otherwise may cause. Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 01 4月, 2020 1 次提交
-
-
由 Ján Tomko 提交于
To demonstrate the move of these attributes from -drive to -device. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
- 24 3月, 2020 1 次提交
-
-
由 Daniel Henrique Barboza 提交于
Using the 'uuid' element for ppc64 NVDIMM memory added in the previous patch, use it in qemuBuildMemoryDeviceStr() to pass it over to QEMU. Another ppc64 restriction is the necessity of a mem->labelsize, given than ppc64 only support label-area backed NVDIMMs. Finally, we don't want ppc64 NVDIMMs to align up due to the high risk of going beyond the end of file with a 256MiB increment that the user didn't predict. Align it down instead. If target size is less than the minimum of 256MiB + labelsize, error out since QEMU will error out if we attempt to round it up to the minimum. Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 16 3月, 2020 1 次提交
-
-
由 Peter Krempa 提交于
Upcoming patches will implement the support for sslverify, cookies, readahead, and timeout properties. Add a test file which will collect the cases. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 04 3月, 2020 2 次提交
-
-
由 Ján Tomko 提交于
Format the 'vhost-user-fs' device on the QEMU command line. This device provides shared file system access using the FUSE protocol carried over virtio. The actual file server is implemented in an external vhost-user-fs device backend process. https://bugzilla.redhat.com/show_bug.cgi?id=1694166Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Start virtiofsd for each <filesystem> device using it. Pre-create the socket for communication with QEMU and pass it to virtiofsd. Note that virtiofsd needs to run as root. https://bugzilla.redhat.com/show_bug.cgi?id=1694166 Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
- 14 2月, 2020 2 次提交
-
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 07 2月, 2020 1 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 06 2月, 2020 1 次提交
-
-
由 Stefan Berger 提交于
This patch adds a test case for domain XML with the tpm-spapr TPM device model. Signed-off-by: NStefan Berger <stefanb@linux.ibm.com> Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 30 1月, 2020 1 次提交
-
-
由 Laine Stump 提交于
The QEMU driver uses the <teaming type='persistent|transient' persistent='blah'/> element to setup a "failover" pair of devices - the persistent device must be a virtio emulated NIC, with the only extra configuration being the addition of ",failover=on" to the device commandline, and the transient device must be a hostdev NIC (<interface type='hostdev'> or <interface type='network'> with a network that is a pool of SRIOV VFs) where the extra configuration is the addition of ",failover_pair_id=$aliasOfVirtio" to the device commandline. These new options are supported in QEMU 4.2.0 and later. Extra qemu-specific validation is added to ensure that the device type/model is appropriate and that the qemu binary supports these commandline options. The result of this will be: 1) The virtio device presented to the guest will have an extra bit set in its PCI capabilities indicating that it can be used as a failover backup device. The virtio guest driver will need to be equipped to do something with this information - this is included in the Linux virtio-net driver in kernel 4.18 and above (and also backported to some older distro kernels). Unfortunately there is no way for libvirt to learn whether or not the guest driver supports failover - if it doesn't then the extra PCI capability will be ignored and the guest OS will just see two independent devices. (NB: the current virtio guest driver also requires that the MAC addresses of the two NICs match in order to pair them into a bond). 2) When a migration is requested, QEMu will automatically unplug the transient/hostdev NIC from the guest on the source host before starting migration, and automatically re-plug a similar device after restarting the guest CPUs on the destination host. While the transient NIC is unplugged, all network traffic will go through the persistent/virtio device, but when the hostdev NIC is plugged in, it will get all the traffic. This means that in normal circumstances the guest gets the performance advantage of vfio-assigned "real hardware" networking, but it can still be migrated with the only downside being a performance penalty (due to using an emulated NIC) during the migration. Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 27 1月, 2020 2 次提交
-
-
由 Peter Krempa 提交于
The tests prefixed default-video* were enabled only for the xml2xml testing and used impossible configurations. Enable them for xml2argv testing fix them: 1) aarch64: remove pointless cpu mode 2) s390x: remove pointless cpu and use existing machine type 3) riscv: remove pointless cpu 4) x86: remove pointless cpu and use existing machine type 5) ppc65: use correct machine type and enable USB Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
XML->XML testing uses DO_TEST_CAPS_LATEST so use it also for the XML->argv testing. Additionally use the same more modern machine type in both tests. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 25 1月, 2020 1 次提交
-
-
由 Han Han 提交于
Since v4.2-rc0, QEMU introduced a builtin rng backend that uses getrandom() syscall to generate random. Add it to libvirt with the backend model 'builtin'. https://bugzilla.redhat.com/show_bug.cgi?id=1785091Signed-off-by: NHan Han <hhan@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 16 1月, 2020 1 次提交
-
-
由 Daniel P. Berrangé 提交于
QEMU since 4.1.0 supports the "dies" parameter for -smp Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: NJiri Denemark <jdenemar@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 13 1月, 2020 2 次提交
-
-
由 Peter Krempa 提交于
Try also the modern incarnation of the test. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Commit v5.10.0-269-g62065a6c moved NUMA validation code to domain definition time and appropriately adjusted affected test cases except for hugepages-default-system-size. And since we don't mock virGetSystemPageSizeKB in our tests, hugepages-default-system-size test would fail on architectures (ppc64le) with default page size other than 4KiB. Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 03 1月, 2020 1 次提交
-
-
由 Daniel P. Berrangé 提交于
Eliminate direct use of normal setenv/unsetenv calls in favour of GLib's wrapper. This eliminates two gnulib modules Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 19 12月, 2019 1 次提交
-
-
由 Daniel Henrique Barboza 提交于
Previous patch made it possible for the QEMU driver to check if a given PCI hostdev is unassigned, by checking if dev->info->type is VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device shouldn't be part of the actual guest launch. Reviewed-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
- 17 12月, 2019 2 次提交
-
-
由 Michal Privoznik 提交于
Now, that we have everything prepared, we can generate command line for NVMe disks. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Daniel Henrique Barboza 提交于
Move the pcihole64 validation being done by qemuBuildGlobalControllerCommandLine() to the existing function qemuDomainDeviceDefValidateControllerPCI(), which provides domain define time validation. The existing pcihole64 validations in qemu_domain.c were replaced by the ones moved from qemu_command.c. The reason is that they are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation, with exclusive QEMU caps and machine types. Tests were adapted to consider the new caps being needed in this earlier stage. Reviewed-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-