since they aren't. Detected by Debian's lintian.

Latest patchset enabling libvirt on s390(x) was developed by
  Viktor Mihajlovski   <mihajlov@linux.vnet.ibm.com>
  Thang Pham           <thang.pham@us.ibm.com>
Add them to the AUTHORS file.

In order to retrieve some sysinfo data we need to parse /proc/sysinfo and
/proc/cpuinfo.
Signed-off-by: NThang Pham <thang.pham@us.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

For the s390x architecture the sysfs core_id alone is not unique. As a
result it can happen that libvirt thinks there are less host CPUs available
than really present.
Currently, a logical CPU is equivalent to a core for s390x. We therefore
produce a fake core id from the CPU number.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Minimal CPU "parser" for s390 to avoid compile time warning.
Signed-off-by: NThang Pham <thang.pham@us.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Adding CPU encoder/decoder for s390 to avoid runtime error messages.
Signed-off-by: NThang Pham <thang.pham@us.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Starting a KVM guest on s390 fails immediately. This is because
"qemu --help" reports -no-acpi even for the s390(x) architecture but
-no-acpi isn't supported there.
Workaround is to remove QEMU_CAPS_NO_ACPI from the capability set
after the version/capability extraction.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

We used to prefix 'rbd:' to volume names, this is not necessary.

Qemu takes RBD devices in this way, like: qemu -drive rbd:pool/image

When attaching a network disk like RBD to a guest we however do not use this prefix.

Currently you can't map a RBD volume name directly to a domain without removing the prefix.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

"cannot set memory of an active domain" is misleading, it sounds
like setting memory of active domain is not supported.

If no 'listen' attribute or <listen> element is set in the
guest XML, the default driver configured listen address is
used. There is no way to client applications to determine
what this address is though. When starting the guest, we
should update the live XML to include this default listen
address

Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.

Currently, we share the idea of old & new def with domains. Users can
*-edit an object (domain, pool) which spawns a new internal
representation for them. This is referenced via
{domainObj,poolObj}->newDef [compared to ->def]. However, for pool we
were never overwriting def with newDef. This must be done on
pool-destroy (like we do analogically in domain detroy).

One of latest patches (0fce94fe) didn't properly indented #define
making syntax-check fail.

Temporary fix since compilation broke with older version of
sanlock following acbd4965

Currently libvirt-lxc checks to see if the destination exists and is a
directory.  If it is not a directory then the mount fails.  Since
libvirt-lxc can bind mount files on an inode, this patch is needed to
allow us to bind mount files on files.  Currently we want to bind mount
on top of /etc/machine-id, and /etc/adjtime

If the destination of the mount point does not exists, it checks if the
src is a directory and then attempts to create a directory, otherwise it
creates an empty file for the destination.  The code will then bind mount
over the destination.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Sometimes it is useful to re-bootstrap libvirt without running
through a ./configure invocation immediately. eg if you want
to run ./configure for Mingw32 rather than native.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On both x86_64-w64-mingw32 and i686-w64-mingw32 there were
the following warnings/errors:

  CC     fstat.lo
../../../gnulib/lib/fstat.c:27:0: warning: "stat" redefined [enabled by default]
In file included from ./sys/stat.h:32:0,
                 from ../../../gnulib/lib/fstat.c:25:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/sys/stat.h:258:0: note: this is the location of the previous definition
../../../gnulib/lib/fstat.c:28:0: warning: "fstat" redefined [enabled by default]
In file included from ./sys/stat.h:32:0,
                 from ../../../gnulib/lib/fstat.c:25:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/sys/stat.h:259:0: note: this is the location of the previous definition

  CC     stat.lo
../../../gnulib/lib/stat.c:32:0: warning: "stat" redefined [enabled by default]
In file included from ./sys/stat.h:32:0,
                 from ../../../gnulib/lib/stat.c:27:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/sys/stat.h:258:0: note: this is the location of the previous definition

  CC     stdio-read.lo
../../../gnulib/lib/stdio-read.c:102:1: error: redefinition of 'vscanf'
In file included from ./stdio.h:43:0,
                 from ../../../gnulib/lib/stdio-read.c:21:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/stdio.h:397:7: note: previous definition of 'vscanf' was here
../../../gnulib/lib/stdio-read.c:108:1: error: redefinition of 'vfscanf'
In file included from ./stdio.h:43:0,
                 from ../../../gnulib/lib/stdio-read.c:21:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/stdio.h:384:7: note: previous definition of 'vfscanf' was here
make[3]: *** [stdio-read.lo] Error 1
make[3]: Leaving directory `/home/berrange/src/virt/libvirt/build/gnulib/lib'

While on x86_64-w64-mingw32 only there was:

In file included from ../../../gnulib/lib/regex.c:69:0:
../../../gnulib/lib/regcomp.c: In function 'parse_dup_op':
../../../gnulib/lib/regcomp.c:2624:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
../../../gnulib/lib/regcomp.c: In function 'mark_opt_subexp':
../../../gnulib/lib/regcomp.c:3859:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some GNULIB headers (eg unistd.h) will often need to include
winsock2.h for various symbols. There is a rule that winsock2.h
must be included before windows.h. This means that any file
which does

  #ifdef WIN32
  #include <windows.h>
  #endif
  #include <unistd.h>

is potentially broken. A simple rule is that /all/ includes of
windows.h must be matched with a preceding include of winsock2.h
regardless of whether unistd.h is used currently
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>

A sanlock lease can be marked as shared (rather
than exclusive)  using SANLK_RES_SHARED flag. This
adds support for that flag and ensures that in auto
disk mode, any shared disks use shared leases. This
also makes any read-only disks be completely
ignored.

These changes remove the need for the option

  ignore_readonly_and_shared_disks

so that is removed
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written

Introduce a new syntax for filesystems to allow use of a RAM
filesystem

   <filesystem type='ram'>
      <source usage='10' units='MiB'/>
      <target dir='/mnt'/>
   </filesystem>

The usage units default to KiB to limit consumption of host memory.

* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The test of ref count is not protected by lock, which is unsafe because
the ref count may have been changed by other threads during the test.

This patch fixes this.

This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.

When shutting down libvirtd, the virNetServer shutdown can deadlock
if there are in-flight jobs being handled by virNetServerHandleJob().
virNetServerFree() will acquire the virNetServer lock and call
virThreadPoolFree() to terminate the workers, waiting for the workers
to finish.  But in-flight workers will attempt to acquire the
virNetServer lock, resulting in deadlock.

Fix the deadlock by unlocking the virNetServer lock before calling
virThreadPoolFree().  This is safe since the virNetServerPtr object
is ref-counted and only decrementing the ref count needs to be
protected.  Additionally, there is no need to re-acquire the lock
after virThreadPoolFree() completes as all the workers have
terminated.

qemu 1.1 features a xhci controller,
this patch adds support for it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.

Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.

For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions.  The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().

This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.

src/util/util.c: virFileOpenAs.

The lxc contoller eventually makes use of virRandomBits(), which was
segfaulting since virRandomInitialize() is never invoked.

Program received signal SIGSEGV, Segmentation fault.
0x00007ffff554d560 in random_r () from /lib64/libc.so.6
(gdb) bt
0  0x00007ffff554d560 in random_r () from /lib64/libc.so.6
1  0x0000000000469eaa in virRandomBits (nbits=32) at util/virrandom.c:80
2  0x000000000045bf69 in virHashCreateFull (size=256,
    dataFree=0x4aa2a2 <hashDataFree>, keyCode=0x45bd40 <virHashStrCode>,
    keyEqual=0x45bdad <virHashStrEqual>, keyCopy=0x45bdfa <virHashStrCopy>,
    keyFree=0x45be37 <virHashStrFree>) at util/virhash.c:134
3  0x000000000045c069 in virHashCreate (size=0, dataFree=0x4aa2a2 <hashDataFree>)
    at util/virhash.c:164
4  0x00000000004aa562 in virNWFilterHashTableCreate (n=0)
    at conf/nwfilter_params.c:686
5  0x00000000004aa95b in virNWFilterParseParamAttributes (cur=0x711d30)
    at conf/nwfilter_params.c:793
6  0x0000000000481a7f in virDomainNetDefParseXML (caps=0x702c90, node=0x7116b0,
    ctxt=0x7101b0, bootMap=0x0, flags=0) at conf/domain_conf.c:4589
7  0x000000000048cc36 in virDomainDefParseXML (caps=0x702c90, xml=0x710040,
    root=0x7103b0, ctxt=0x7101b0, expectedVirtTypes=16, flags=0)
    at conf/domain_conf.c:8658
8  0x000000000048f011 in virDomainDefParseNode (caps=0x702c90, xml=0x710040,
    root=0x7103b0, expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9360
9  0x000000000048ee30 in virDomainDefParse (xmlStr=0x0,
    filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", caps=0x702c90,
    expectedVirtTypes=16, flags=0) at conf/domain_conf.c:9310
10 0x000000000048ef00 in virDomainDefParseFile (caps=0x702c90,
    filename=0x702ae0 "/var/run/libvirt/lxc/x.xml", expectedVirtTypes=16, flags=0)
    at conf/domain_conf.c:9332
11 0x0000000000425053 in main (argc=5, argv=0x7fffffffe2b8)
    at lxc/lxc_controller.c:1773

The comment says:

/* Now create the final dir in the path with the uid/gid/mode
 * requested in the config. If the dir already exists, just set
 * the perms.
 */

However, virDirCreate is only invoked if the target path doesn't
exist yet (which is opposite with the comment), or the uid from
the config is not -1 (I don't understand why, think it's just
another mistake). And the result is the perms of the pool won't
be changed if one tries to build the pool with different perms
again.

Besides these logic error fix, if no uid and gid are specified in
the config, the practical used uid, gid are reflected.

The two new APIs are rather trivial; based on bits and pieces of
other existing APIs.  But rather than blindly return 0 or 1 for
HasMetadata, I chose to first validate that the snapshot in
question in fact exists.

* src/esx/esx_driver.c (esxDomainSnapshotIsCurrent)
(esxDomainSnapshotHasMetadata): New functions.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotIsCurrent)
(vboxDomainSnapshotHasMetadata): Likewise.

Blindly returning success is misleading if the object no longer
exists; it is a bit better to check for existence up front before
returning information about that object.  This pattern matches the
fact that most of our other APIs check for existence as a side
effect prior to getting at the real piece of information being
queried.

* src/esx/esx_driver.c (esxDomainIsUpdated, esxDomainIsPersistent):
Add existence checks.
* src/vbox/vbox_tmpl.c (vboxDomainIsPersistent)
(vboxDomainIsUpdated): Likewise.

This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.

For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.

since int is 4 bytes on both i386 and amd64.

Fix the default usb controller for pseries systems if none
specified.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>

The two new functions are very similar to the existing functions;
just a matter of different arguments and a call to a different
helper function.

* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Support new flags.
(qemuDomainListAllSnapshots): New functions.