Now that qemuMonitorGetAllBlockStatsInfo collects also wr_highest_offset
the whole function can be killed.

"query-block-jobs" QMP command returns all running block jobs at once,
while qemuMonitorBlockJobInfo would only report one. This is not very
nice in case we need to check several block jobs. This patch refactors
the monitor code to always parse all block jobs and store them in a
hash.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

All the callers use "/" anyway.

When traversing through the QOM tree, we're looking for
a link to a device, e.g.:
link<virtio-balloon-pci>

Introduce a helper that will format the link name at the start,
instead of doing it every time while recursing through the tree.

This function is specific to the JSON monitor.

Since it now handles only block pull code paths we can refactor it and
remove tons of cruft.

Sacrifice a few lines of code in favor of the code being more readable.

qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.

In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.

There are two leftover unused variables. Remove them and clean up the
fallout of the change.

It only deals with a single thread.

When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.

https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.

Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:

error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found

even though the file exists.  Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.

As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.

* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: NEric Blake <eblake@redhat.com>

The functions and their QMP and HMP implementations are no longer needed
since everything is now done via the *AllStats functions.

Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.

The error count statistic is not supported by qemu, so there's no need
to pass the variables around if the result is ignored anyways.

QEMU internally updates the size of video memory if the domain XML had
provided too low memory size or there are some dependencies for a QXL
devices 'vgamem' and 'ram' size. We need to know about the changes and
store them into the status XML to not break migration or managedsave
through different libvirt versions.

The values would be loaded only if the "vgamem_mb" property exists for
the device.  The presence of the "vgamem_mb" also tells that the
"ram_size" and "vram_size" exists for QXL devices.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

A future patch will allow recursion into backing chains when
collecting block stats.  This patch should not change behavior,
but merely moves out the common code that will be reused once
recursion is enabled, and adds the parameter that will turn on
recursion.

* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Add recursion parameter,
although it is ignored for now.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Add parameter, and
split...
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): ...into helpers.
(qemuMonitorJSONGetBlockStatsInfo): Update caller.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Update caller.
* src/qemu/qemu_migration.c (qemuMigrationCookieAddNBD): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.

We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.

https://bugzilla.redhat.com/show_bug.cgi?id=1163953Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: NMatthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

To allow live modification of device backends in qemu libvirt needs to
be able to hot-add/remove "objects". Add monitor backend functions to
allow this.

This function will be used for hot-add/remove of RNG backends,
IOThreads, memory backing objects, etc.

This function can be called at any time to get the current status of a
guest's network device rx-filter. In particular it is useful to call
after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only
tells you that something has changed in the rx-filter, the details are
retrieved with the query-rx-filter monitor command (only available in
the json monitor). The command sent to the qemu monitor looks like this:

  {"execute":"query-rx-filter", "arguments": {"name":"net2"} }'

and the results will look something like this:

{
    "return": [
        {
            "promiscuous": false,
            "name": "net2",
            "main-mac": "52:54:00:98:2d:e3",
            "unicast": "normal",
            "vlan": "normal",
            "vlan-table": [
                42,
                0
            ],
            "unicast-table": [

            ],
            "multicast": "normal",
            "multicast-overflow": false,
            "unicast-overflow": false,
            "multicast-table": [
                "33:33:ff:98:2d:e3",
                "01:80:c2:00:00:21",
                "01:00:5e:00:00:fb",
                "33:33:ff:98:2d:e2",
                "01:00:5e:00:00:01",
                "33:33:00:00:00:01"
            ],
            "broadcast-allowed": false
        }
    ],
    "id": "libvirt-14"
}

This is all parsed from JSON into a virNetDevRxFilter object for
easier consumption. (unicast-table is usually empty, but is also an
array of mac addresses similar to multicast-table).

(NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h
now includes util/virnetlink.h, which includes netlink/msg.h when
appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if
libnl/netlink isn't available, LIBNL_CFLAGS will be empty and
virnetlink.h won't try to include netlink/msg.h anyway).)

While our code gathers block stats via "query-blockstats" some
information need to be gathered via "query-block". Add a helper function
that will update the blockstats structure if requested.

The current block stats code matched up the disk name with the actual
stats by the order in the data returned from qemu. This unfortunately
isn't right as qemu may return the disks in any order. Fix this by
returning a hash of stats and index them by the disk alias.

This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.

To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: NFrancesco Romani <fromani@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Generate infrastructure and test to handle fetching the QMP
IOThreads data.

Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3.  Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy).  I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.

Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.

Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'

because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter).  I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).

* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.

Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art).  This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code.  Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.

* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: NEric Blake <eblake@redhat.com>

Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba3.

In the process, make some tweaks to simplify the logic when
parsing the JSON reply.  There should be no user-visible
semantic changes.

* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1103245

An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.

1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.

To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.

We are about to turn on support for active block commit.  Although
qemu 2.0 was the first version to mostly support it, that version
mis-handles 0-length files, and doesn't have anything available for
easy probing.  But qemu 2.1 fixed bugs, and made life simpler by
letting the 'top' argument be optional.  Unless someone begs for
active commit with qemu 2.0, for now we are just going to enable
it only by probing for qemu 2.1 behavior (anyone backporting active
commit can also backport the optional argument behavior).  This
requires qemu.git commit 7676e2c597000eff3a7233b40cca768b358f9bc9.

Although all our actual uses of block-commit supply arguments for
both base and top, we can omit both arguments and use a bogus
device string to trigger an interesting behavior in qemu.  All QMP
commands first do argument validation, failing with GenericError
if a mandatory argument is missing.  Once that passes, the code
in the specific command gets to do further checking, and the qemu
developers made sure that if device is the only supplied argument,
then the block-commit code will look up the device first, with a
failure of DeviceNotFound, before attempting any further argument
validation (most other validations fail with GenericError).  Thus,
the category of error class can reliably be used to decipher
whether the top argument was optional, which in turn implies a
working active commit.  Since we expect our bogus device string to
trigger an error either way, the code is written to return a
distinct return value without spamming the logs.

* src/qemu/qemu_monitor.h (qemuMonitorSupportsActiveCommit): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorSupportsActiveCommit):
Implement it.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Allow NULL for top and base, for probing purposes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise, implementing the probe.
* tests/qemumonitorjsontest.c (mymain): Enable...
(testQemuMonitorJSONqemuMonitorSupportsActiveCommit): ...a new test.
Signed-off-by: NEric Blake <eblake@redhat.com>

In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

This patch makes qemu driver support virDomainCoreDumpWithFormat API.
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>

This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>

While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue.  Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]

Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.

Put another way, if you have the backing chain:

[A] <- [B(back=./A)] <- [C(back=./B)]

and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]?  Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.

I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.

* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>