Small wrapper to lookup interface in domain definition by its
name.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Users might have configured interface so that it's type of
network, but the corresponding network plugs interfaces into an
OVS bridge. Therefore, we have to check for the actual type of
the interface instead of the configured one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This code compiles only on Linux. Therefore the condition we
check is always true.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

clang doesn't like mode_t type as an argument to va_arg():

error: second argument to 'va_arg' is of promotable type 'mode_t' (aka
'unsigned short'); this va_arg has undefined behavior because arguments
will be promoted to 'int'

    mode = va_arg(ap, mode_t);
                      ^~~~~~
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1498528Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:

<disk type='file' device='disk'>
  <driver name='qemu' type='qcow2' queues='4'/>

The corresponding QEMU command line:

-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: NLin Ma <lma@suse.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NLin Ma <lma@suse.com>

When detaching an <interface/> from a domain, the MAC address is
parsed and if not present one is generated. If no corresponding
interface is found in the domain, the following error is
reported:

error: operation failed: no device matching mac address 52:54:00:75:32:5b found

where the MAC address is the auto generated one. This might be
very confusing. Solution to this is to ignore auto generated MAC
address when looking up the device.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

It will come handy to know if the MAC address was generated (e.g.
during XML parse) or if it was parsed since provided by user in
the XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Found by Coverity. If virNWFilterHashTablePut, then the 3rd arg @val
must be free'd since it would be leaked.

This also fixes potential problem on the error path where the caller
could assume the virNWFilterHashTablePut was successful when in fact
it failed leading to other issues.

Rather than using loop break;'s in order to force a return
of rc = -1, let's just return -1 immediately on the various
error paths and then return 0 on the success path.

This is normally not an issue since the tests which use mocked open() do
not create files. But once coverage build is enabled, gcov_open will use
O_CREATE and real_open will read random data rather than the actual mode
argument.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Free DBusMessage pointer in virPolkitCheckAuth
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

virDomainDiskSourceParse got to the point of being an ugly spaghetti
mess by adding more and more stuff into it. Split out parsing of network
disk information into a separate function so that it stays contained.

* docs/news.xml: updated for release
* po/*.po*: regenerated

Building RPM should only be allowed on a supported platform, but
unpacking the source and applying all patches can be done anywhere.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We get a question every now and then about why hibernation works when
suspend-to-disk is disabled and similar.  Let's hope that, by documenting the
obvious more blatantly, people will get more informed.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

On pure success paths, virNWFilterIPAddrMapAddIPAddr was validly
consuming the input @addr; however, on failure paths it was possible
that virNWFilterVarValueCreateSimple succeed, but virNWFilterHashTablePut
failed resulting in virNWFilterVarValueFree being called to clean
up @val which also cleaned up the input @addr. Thus the caller had
no way to determine on failure whether it too should clean up the
passed parameter.

Instead, let's create a copy of the input @addr, then handle that
properly in the API allowing/forcing the caller to free it's own
copy of the input parameter.

This reverts commit 6209bb32.

This turns out to be the wrong adjustment

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.

Sample TLS args generated by libvirt -

    -object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
    endpoint=client,verify-peer=yes \
    -drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
    file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
    file.server.type=tcp,file.server.host=192.168.0.1,\
    file.server.port=9999,format=raw,if=none,\
    id=drive-virtio-disk0,cache=none \
    -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
    id=virtio-disk0

Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".

Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk.  The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a function to setup any TLS needs for a disk source.

If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.

For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.

Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.

Sample XML for a VxHS disk:

<disk type='network' device='disk'>
  <driver name='qemu' type='raw' cache='none'/>
  <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
    <host name='192.168.0.1' port='9999'/>
  </source>
  <target dev='vda' bus='virtio'/>
</disk>

Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.

Update the qemuxml2xmltest in order to add a test to show the proper
parsing.

Also update the docs to describe the tls attribute.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Clean up the description a bit to make it more readable and not
appear as one long run-on paragraph.

Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.

The following describes the behavior of TLS for VxHS block device:

  (1) Two new options have been added in /etc/libvirt/qemu.conf
      to control TLS behavior with VxHS block devices
      "vxhs_tls" and "vxhs_tls_x509_cert_dir".
  (2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
      TLS for VxHS block devices.
  (3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
      TLS CA certificate and the client certificate and keys are saved.
      If this value is missing, the "default_tls_x509_cert_dir" will be
      used instead. If the environment is not configured properly the
      authentication to the VxHS server will fail.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The virNWFilterIPAddrMapAddIPAddr code can consume the @addr parameter
on success when the @ifname is found in the ipAddressMap->hashTable
hash table in the call to virNWFilterVarValueAddValue; however, if
not found in the hash table, then @addr is formatted into a @val
which is stored in the table and on return the caller would be
expected to free @addr.

Thus, the caller has no way to determine on success whether @addr was
consumed, so in order to fix this create a @tmp variable which will
be stored/consumed when virNWFilterVarValueAddValue succeeds. That way
the caller can free @addr whether the function returns success or failure.

The packet with passed FD has the following format:

    --------------------------
    | len | header | payload |
    --------------------------

where "payload" has an additional count of FDs before the actual data:

    ------------------
    | nfds | payload |
    ------------------

When the packet is received we parse the "header", which as a side
effect updates msg->bufferOffset to point to the beginning of "payload".
If the message call contains FDs, we need to also parse the count of
FDs, which also updates the msg->bufferOffset.

The issue here is that when we attempt to read the FDs data from the
socket and we receive EAGAIN we finish the reading and call poll()
to wait for the data the we need.  When the data arrives we already have
the packet in our buffer so we read the "header" again but this time
we don't read the count of FDs because we already have it stored.

That means that the msg->bufferOffset is not updated to point to the
actual beginning of the payload data, but it points to the count of
FDs.  After all FDs are processed we dispatch the message to process
it and decode the payload.  Since the msg->bufferOffset points to wrong
data, we decode the wrong payload and the API call fails with
error messages:

    Domain not found: no domain with matching uuid '67656e65-7269-6300-0c87-5003ca6941f2' ()

Broken by commit 133c511b which fixed a FD and memory leak.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

VM private data is cleared when the VM is turned off and also when the
VM object is being freed. Some of the clearing code was duplicated.
Extract it to a separate function.

This also removes the now unnecessary function
qemuDomainClearPrivatePaths.

Signed-off-by: NErik Skultety <eskultet@redhat.com>

Calling fallocate on the new (smaller) capacity ensures
that the whole file is allocated, but it does not reduce
the file size.

Also call ftruncate after fallocate.

https://bugzilla.redhat.com/show_bug.cgi?id=1366446

We have been trying to implement the ALLOCATE flag to mean
"the volume should be fully allocated after the resize".

Since commit b0579ed9 we do not allocate from the existing
capacity, but from the existing allocation value.
However this value is a total of all the allocated bytes,
not an offset.

For a sparsely allocated file:
$ perl -e 'print "x"x8192;' > vol1
$ fallocate -p -o 0 -l 4096 vol1
$ virsh vol-info vol1 default
Capacity:       8.00 KiB
Allocation:     4.00 KiB

Treating allocation as an offset would result in an incompletely
allocated file:
$ virsh vol-resize vol1 --pool default 16384 --allocate
Capacity:       16.00 KiB
Allocation:     12.00 KiB

Call fallocate from zero on the whole requested capacity to fully
allocate the file. After that, the volume is fully allocated
after the resize:
$ virsh vol-resize vol1 --pool default 16384 --allocate
$ virsh vol-info vol1 default
Capacity:       16.00 KiB
Allocation:     16.00 KiB

Introduce a new function virFileAllocate that will call the
non-destructive variants of safezero, essentially reverting
my commit 1390c268
    safezero: fall back to writing zeroes even when resizing
back to the state as of commit 18f03166
    virstoragefile: Have virStorageFileResize use safezero

This means that _ALLOCATE flag will no longer work on platforms
without the allocate syscalls, but it will not overwrite data
either.

https://bugzilla.redhat.com/show_bug.cgi?id=1476775

For the virsh pool-{define|create}-as command, let's allow using
--secret-uuid on the command line as an alternative to --secret-usage
(added for commit id '89325806'), but ensure that they are mutually
 exclusive.

Don't leak @inetaddr within the done: processing when attempting
to instantiate the filter.
Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn>

If virNWFilterHashTablePut fails, then the @val was leaked.
Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn>

Use an empty string to let qemu fill out the default.
This matches what's done in qemuBuildChrChardevStr.

https://bugzilla.redhat.com/show_bug.cgi?id=1454671Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit edaf4ebe.

This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.

Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>