Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.

Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP).  That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).

In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:

   <interface type='ethernet'>
      <target dev='mytap0' managed='no'/>
      ...
   </interface>

This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.

(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This will simplify addition of another attribute to the <target> element
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.

To avoid this, don't clear the user-defined alias for video devices of
type "none".

https://bugzilla.redhat.com/show_bug.cgi?id=1720612Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The attribute is named 'secret', not 'uuid'
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

In the future we will perform more actions if ns.parse
is present. Decouple the condition from the actual call.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

We do not need to pass the root node, since it's already
included in the XPathContext.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.

But resctrl is improperly freed when sharing happens.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The only code path which calls the parser with the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE is from qemuDomainBlockCopy. Since that
code path can properly handle backing chains for the disk and it's
desired to pass the parsed chains to the block copy code remove the
condition which prevents parsing the <backingStore> element.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")

This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.

To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.

  <features>
    <kvm>
      <hint-dedicated state='on'/>
    </kvm>
  </features>
  ...
  <cpu mode='host-passthrough ... />
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Signed-off-by: NMenno Lageman <menno.lageman@oracle.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.

Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338

This reverts commit 94b3aa55Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Since its introduction in commit
8737578d, the TPM version format is
"2.0" and not "2".
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.

QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.

Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Current code doesn't allow us to add sub-features as we always print the
closing '/>'. As a preparatory change to implementing 'direct' sub-feature
for 'stimer' feature switch to printing closing tag individually.

No functional change.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This piece of code will be re-used later.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:

  "%04x:%02x:%02x.%d"

The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A new algorithm for detecting the vcpus and monitor type conflicts
between new monitor an existing allocation and monitor groups.

After refactoring, since we are verifying both @vcpus and monitor
type @tag at the same time, the validating function name has been
renamed from virDomainResctrlMonValidateVcpus to
virDomainResctrlValidateMonitor.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

'virResctrlAllocIsEmpty' checks if cache allocation or memory
bandwidth allocation settings are specified in configuration
file. It is not proper to be used in checking memory bandwidth
allocation is specified in XML settings because this function
could not distinguish memory bandwidth allocations from cache
allocations.

Here using the local variable @n, which indicates the cache
allocation groups or memory bandwidth groups depending on the
context it is in, to decide if append a new @resctrl object.

If @n is zero and no monitors groups specified in XML, then
we should not append a new @resctrl object to @def->resctrls.

This kind of replacement is also more efficient and avoiding
a long function calling path.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Let 'virDomainResctrlVcpuMatch' to retrieve a pointer of
virDomainResctrlDefPtr in its third parameter instead
of virResctrlAllocPtr, if @vcpus is matched with the vcpus
of some resctrl allocation in list of @def->resctrls.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Creating object and judging if it is successfully created in fewer
lines.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

code cleanup for 'virDomainCachetuneDefParse' and
'virDomainMemorytuneDefParse'.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Remove some redundant space and line.
Signed-off-by: NWang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list.  This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.

Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.

Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>