- 12 11月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
In a first step I am converting the netlink message construction in macvtap code to use libnl. It's pretty much a 1:1 conversion except that now the message needs to be allocated and deallocated.
-
- 10 11月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Using automated replacement with sed and editing I have now replaced all occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of course. Some replacements were straight forward, others I needed to pay attention. I hope I payed attention in all the right places... Please have a look. This should have at least solved one more double-close error.
-
- 28 7月, 2010 1 次提交
-
-
由 Gerhard Stenzel 提交于
During function test of the 802.1Qbg implementation in lldpad we came across a small problem in the handling of the netlink message corresponding to PORT_PROFILE_RESPONSE_INPROGRESS. This should not result in returning the default rc=1. - src/util/macvtap.c: fix getPortProfileStatus() to return 0 in that case and also fix an indentation problem
-
- 17 6月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This patch works around a recent extension of the netlink driver I had made use of when building the netlink messages. Unfortunately older kernels don't accept IFLA_IFNAME + name of interface as a replacement for the interface's index, so this patch now gets the interface index ifindex if it's not provided (ifindex <= 0).
-
- 03 6月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
-
- 26 5月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* src/util/macvtap.c: (associatePortProfileId) (disassociatePortProfileId): Move inside HAVE_MACVTAP conditional. Reported by Eduardo Otubo.
-
由 Stefan Berger 提交于
This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
-
- 11 5月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/util/macvtap.c (delMacvtap): Fix documentation.
-
- 13 4月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Changes from v1 to v2: - changed function name prefixes to 'iface' from previous 'Iface' - Further to make make syntax-check pass: - indentation fix in interface.h - added entry to POTFILES.in I am consolidating network interface related functions used in nwfilter and macvtap code in utils/interface.c. All function names are prefixed with 'Iface'. The following functions are now available through interface.h: int ifaceCtrl(const char *name, bool up); int ifaceUp(const char *name); int ifaceDown(const char *name); int ifaceCheck(bool reportError, const char *ifname, const unsigned char *macaddr, int ifindex); int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex); I added 'int ifindex' as parameter to ifaceCheck to the original function and modified the code accordingly.
-
- 07 4月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Also rename ReportError to macvtapError.
-
- 12 3月, 2010 1 次提交
-
-
由 Laine Stump 提交于
* src/util/macvtap.c: replace _("....") with "%s", _("...") in two places
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 08 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
Prior to this patch, there was an inconsistent mix between GNU and C99. For consistency, and potential portability to other compilers, stick with the C99 vararg macro syntax. * src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/conf/domain_conf.c (virDomainReportError): Likewise. * src/conf/domain_event.c (eventReportError): Likewise. * src/conf/interface_conf.c (virInterfaceReportError): Likewise. * src/conf/network_conf.c (virNetworkReportError): Likewise. * src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise. * src/conf/secret_conf.h (virSecretReportError): Likewise. * src/conf/storage_conf.h (virStorageReportError): Likewise. * src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than GNU vararg macro syntax. * src/esx/esx_driver.c (ESX_ERROR): Likewise. * src/esx/esx_interface_driver.c (ESX_ERROR): Likewise. * src/esx/esx_network_driver.c (ESX_ERROR): Likewise. * src/esx/esx_secret_driver.c (ESX_ERROR): Likewise. * src/esx/esx_storage_driver.c (ESX_ERROR): Likewise. * src/esx/esx_util.c (ESX_ERROR): Likewise. * src/esx/esx_vi.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vmx.c (ESX_ERROR): Likewise. * src/util/hostusb.c (usbReportError): Use C99 rather than GNU vararg macro syntax. * src/util/json.c (virJSONError): Likewise. * src/util/macvtap.c (ReportError): Likewise. * src/util/pci.c (pciReportError): Likewise. * src/util/stats_linux.c (virStatsError): Likewise. * src/util/util.c (virUtilError): Likewise. * src/util/xml.c (virXMLError): Likewise. * src/xen/proxy_internal.c (virProxyError): Use C99 rather than GNU vararg macro syntax. * src/xen/sexpr.c (virSexprError): Likewise. * src/xen/xen_driver.c (xenUnifiedError): Likewise. * src/xen/xen_hypervisor.c (virXenError): Likewise. * src/xen/xen_inotify.c (virXenInotifyError): Likewise. * src/xen/xend_internal.c (virXendError): Likewise. * src/xen/xm_internal.c (xenXMError): Likewise. * src/xen/xs_internal.c (virXenStoreError): Likewise. * src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/datatypes.c (virLibConnError): Likewise. * src/interface/netcf_driver.c (interfaceReportError): Likewise. * src/libvirt.c (virLibStreamError): Likewise. * src/lxc/lxc_conf.h (lxcError): Likewise. * src/network/bridge_driver.c (networkReportError): Likewise. * src/nodeinfo.c (nodeReportError): Likewise. * src/opennebula/one_conf.h (oneError): Likewise. * src/openvz/openvz_conf.h (openvzError): Likewise. * src/phyp/phyp_driver.c (PHYP_ERROR): Likewise. * src/qemu/qemu_conf.h (qemuReportError): Likewise. * src/remote/remote_driver.c (errorf): Likewise. * src/security/security_driver.h (virSecurityReportError): Likewise. * src/test/test_driver.c (testError): Likewise. * src/uml/uml_conf.h (umlReportError): Likewise. * src/vbox/vbox_driver.c (vboxError): Likewise. * src/vbox/vbox_tmpl.c (vboxError): Likewise.
-
- 19 2月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
This patch sets or unsets the IFF_VNET_HDR flag depending on what device is used in the VM. The manipulation of the flag is done in the open function and is only fatal if the IFF_VNET_HDR flag could not be cleared although it has to be (or if an ioctl generally fails). In that case the macvtap tap is closed again and the macvtap interface torn. * src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to qemudPhysIfaceConnect() * src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to openMacvtapTap(), and private function configMacvtapTap() * src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling qemudPhysIfaceConnect()
-
- 18 2月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Rework and simplification of teardown of the macvtap device. Basically all devices with the same MAC address and link device are kept alive and not attempted to be torn down. If a macvtap device linked to a physical interface with a certain MAC address 'M' is to be created it will automatically fail if the interface is 'up'ed and another macvtap with the same properties (MAC addr 'M', link dev) happens to be 'up'. This will prevent the VM from starting or the device from being attached to a running VM. Stale interfaces are assumed to be there for some reason and not stem from libvirt. In the VM shutdown path, it's assuming that an interface name is always available so that if the device type is DIRECT it can be torn down using its name. * src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine * src/util/macvtap.c: cleanups and change of deleting routine * src/qemu/qemu_driver.c: change cleanup on shutdown * src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()
-
- 16 2月, 2010 2 次提交
-
-
由 Stefan Berger 提交于
This part adds the helper code to setup and tear down macvtap devices using direct communication with the device driver via netlink sockets. The rather short messages received from the netlink layer are now written into a dynamically allocated buffer * src/util/macvtap.h src/util/macvtap.c: provides the new module * po/POTFILES.in: the module contains translated strings
-
由 Stefan Berger 提交于
This patch adds build support for libvirt checking for certain contents of /usr/include/linux/if_link.h to see whether macvtap support is compilable on that system. One can disable macvtap support in libvirt via --without-macvtap passed to configure. * configure.ac src/Makefile.am: new build support * src/libvirt_macvtap.syms: list of exported symbols * src/util/macvtap.c: empty module to not break compilation
-
- 27 3月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-