- 16 1月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
When parsing the <disk> element specification, if no <address> is provided for the disk, then automatically assign one based on the <target dev='sdXX'/> device name. This provides for backwards compatability with existing applications using libvirt, while also allowing new apps to have complete fine grained control. * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: Add virDomainDiskDefAssignAddress() for assigning a controller/bus/unit address based on disk target * src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after generating XML from ARGV * tests/qemuxml2argvdata/*.xml: Add in drive address information to all XML files
-
由 Daniel P. Berrange 提交于
All guest devices now use a common device address structure summarized by: enum virDomainDeviceAddressType { VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI, }; struct _virDomainDevicePCIAddress { unsigned int domain; unsigned int bus; unsigned int slot; unsigned int function; }; struct _virDomainDeviceInfo { int type; union { virDomainDevicePCIAddress pci; } addr; }; This replaces the anonymous structs in Disk/Net/Hostdev data structures. Where available, the address is *always* printed in the XML file, instead of being hidden in the internal state file. <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/> The structure definition is based on Wolfgang Mauerer's disk controller patch series. * docs/schemas/domain.rng: Define the <address> syntax and associate it with disk/net/hostdev devices * src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms: APIs for parsing/formatting address information. Also remove the QEMU specific 'pci_addr' attributes * src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with new standardized format.
-
- 12 1月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
Can be used to re-set an old error, which may have been squashed by other functions (like cleanup routines). Will be used in subsequent patches
-
- 23 12月, 2009 2 次提交
-
-
由 Matthias Bolte 提交于
All other stateful drivers are linked directly to libvirtd instead of libvirt.so. Link the secret driver to libvirtd too. * daemon/Makefile.am: link the secret driver to libvirtd * daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks * src/Makefile.am: don't link the secret driver to libvirt.so * src/libvirt_private.syms: remove the secretRegister symbol
-
由 Matthias Bolte 提交于
MinGW's ld gives an error when trying to export undefined symbols.
-
- 18 12月, 2009 2 次提交
-
-
由 Jiri Denemark 提交于
Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
-
由 Jiri Denemark 提交于
* include/libvirt/virterror.h src/util/virterror.c: add new domain VIR_FROM_CPU for errors * src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module * src/Makefile.am proxy/Makefile.am: include new files * src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference new code * src/libvirt_private.syms: private export of new entry points
-
- 10 12月, 2009 3 次提交
-
-
由 Mark McLoughlin 提交于
We don't use this method of reloading rules anymore, so we can just kill the code. This simplifies things a lot because we no longer need to keep a table of the rules we've added. * src/util/iptables.c: kill iptablesReloadRules()
-
由 Mark McLoughlin 提交于
Long ago we tried to use Fedora's lokkit utility in order to register our iptables rules so that 'service iptables restart' would automatically load our rules. There was one fatal flaw - if the user had configured iptables without lokkit, then we would clobber that configuration by running lokkit. We quickly disabled lokkit support, but never removed it. Let's do that now. The 'my virtual network stops working when I restart iptables' still remains. For all the background on this saga, see: https://bugzilla.redhat.com/227011 * src/util/iptables.c: remove lokkit support * configure.in: remove --enable-lokkit * libvirt.spec.in: remove the dirs used only for saving rules for lokkit * src/Makefile.am: ditto * src/libvirt_private.syms, src/network/bridge_driver.c, src/util/iptables.h: remove references to iptablesSaveRules
-
由 Matthias Bolte 提交于
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset(). Update documentation and replace all remaining calls to free() with calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset() and virReportOOMError() in OOM error cases.
-
- 08 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Now that drivers are using a private domain object state blob, the virDomainObjFormat/Parse methods are no longer able to directly serialize all neccessary state to/from XML. It is thus neccessary to introduce a pair of callbacks fo serializing private state. The code for serializing vCPU PIDs and the monitor device config can now move out of domain_conf.c and into the qemu_driver.c where they belong. * src/conf/capabilities.h: Add callbacks for serializing private state to/from XML * src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids fields from virDomainObjPtr. Remove code that serialized those fields * src/libvirt_private.syms: Export virXPathBoolean * src/qemu/qemu_driver.c: Add callbacks for serializing monitor and vcpupid data to/from XML * src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor char device config into qemuMonitorOpen directly.
-
- 07 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
This introduces simple API for handling JSON data. There is an internal data structure 'virJSONValuePtr' which stores a arbitrary nested JSON value (number, string, array, object, nul, etc). There are APIs for constructing/querying objects and APIs for parsing/formatting string formatted JSON data. This uses the YAJL library for parsing/formatting from http://lloyd.github.com/yajl/ * src/util/json.h, src/util/json.c: Data structures and APIs for representing JSON data, and parsing/formatting it * configure.in: Add check for yajl library * libvirt.spec.in: Add build requires for yajl * src/Makefile.am: Add json.c/h * src/libvirt_private.syms: Export JSON symbols to drivers
-
- 05 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
Some of the very useful calls for XML parsing provided by util/xml.[ch] were not exported as private symbols. This patch fixes this. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 27 11月, 2009 1 次提交
-
-
由 Wolfgang Mauerer 提交于
The instruction "See Makefile.am" in libvirt.private_syms always makes me think that this file is autogenerated and should not be touched manually. This patch spares every reader of libvirt.private_syms the hassle of reading Makefile.am before augmenting libvirt.private_syms. Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
-
- 23 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/Makefile.am: Add processinfo.h/processinfo.c * src/util/processinfo.c, src/util/processinfo.h: Module providing APIs for getting/setting process CPU affinity * src/qemu/qemu_driver.c: Switch over to new APIs for schedular affinity * src/libvirt_private.syms: Export virProcessInfoSetAffinity and virProcessInfoGetAffinity to internal drivers
-
- 13 11月, 2009 1 次提交
-
-
由 David Allan 提交于
* configure.in: add new --with-udev, disabled by default, and requiring libudev > 145 * src/node_device/node_device_udev.c src/node_device/node_device_udev.h: the new node device backend * src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c to a better file name * src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple of fields in node device definitions, and an API to look them up, remove a couple of unused fields from previous patch. * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: plug the new driver * po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new files and symbols * src/util/util.h src/util/util.c: add a new convenience macro virBuildPath and virBuildPathInternal() function
-
- 10 11月, 2009 3 次提交
-
-
由 Daniel P. Berrange 提交于
Add reference counting on the virDomainObjPtr objects. With the forthcoming asynchronous QEMU monitor, it will be neccessary to release the lock on virDomainObjPtr while waiting for a monitor command response. It is neccessary to ensure one thread can't delete a virDomainObjPtr while another is waiting. By introducing reference counting threads can make sure objects they are using are not accidentally deleted while unlocked. * src/conf/domain_conf.h, src/conf/domain_conf.c: Add virDomainObjRef/Unref APIs, remove virDomainObjFree * src/openvz/openvz_conf.c: replace call to virDomainObjFree with virDomainObjUnref
-
由 Daniel P. Berrange 提交于
* src/util/threads.h, src/util/threads-pthread.c, src/libvirt_private.syms: Add virCondWaitUntil()
-
由 Daniel P. Berrange 提交于
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct opaque to callers of the API. Add accessor methods for managing devices in the list * src/qemu/qemu_driver.c: Update to use APIs instead of directly accessing pciDeviceList fields
-
- 09 11月, 2009 1 次提交
-
-
由 Gerhard Stenzel 提交于
As it was basically unimplemented and more confusing than useful at the moment. * src/libvirt_private.syms: remove from internal symbols list * src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and one use of the unimplemented function
-
- 06 11月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
Use this function in the qemu, uml, lxc, and test drivers.
-
- 04 11月, 2009 1 次提交
-
-
由 Gerhard Stenzel 提交于
* configure.in: look for ebtables binary location if present * src/Makefile.am: add the new module * src/util/ebtables.[ch]: new module and internal APIs around the ebtables binary * src/libvirt_private.syms: export the symbols only internally
-
- 02 11月, 2009 1 次提交
-
-
由 Matthew Booth 提交于
* src/util/network.[ch] Add functions for address->text and get/set port number * src/libvirt_private.syms: add new entry points
-
- 30 10月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* src/libvirt_private.syms: keep all symbols from network.h private
-
- 29 10月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
The current virDomainObjListPtr object stores domain objects in an array. This means that to find a particular objects requires O(n) time, and more critically acquiring O(n) mutex locks. The new impl replaces the array with a virHashTable, keyed off UUID. Finding a object based on UUID is now O(1) time, and only requires a single mutex lock. Finding by name/id is unchanged in complexity. In changing this, all code which iterates over the array had to be updated to use a hash table iterator function callback. Several of the functions which were identically duplicating across all drivers were pulled into domain_conf.c * src/conf/domain_conf.h, src/conf/domain_conf.c: Change virDomainObjListPtr to use virHashTable. Add a initializer method virDomainObjListInit, and rename virDomainObjListFree to virDomainObjListDeinit, since its not actually freeing the container, only its contents. Also add some convenient methods virDomainObjListGetInactiveNames, virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains which can be used to implement the correspondingly named public API entry points in drivers * src/libvirt_private.syms: Export new methods from domain_conf.h * src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_conf.c, src/openvz/openvz_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code to deal with hash tables instead of arrays for domains
-
- 28 10月, 2009 2 次提交
-
-
由 Cole Robinson 提交于
This will simplify adding FindPoolSources support to more pool backends in the future (as well as the test driver).
-
由 Cole Robinson 提交于
Similar in theory to *AssignDef type functions, this duplicate functionality will be used by an future FindPoolSources implementations.
-
- 21 10月, 2009 2 次提交
-
-
由 Richard Jones 提交于
This adds simple support for configuring a guest with a QEMU/KVM virtual hardware watchdog device.
-
由 Cole Robinson 提交于
These will be used by the test driver, so move them to a shareable space.
-
- 08 10月, 2009 2 次提交
-
-
由 Amy Griffis 提交于
When configuring logging settings, keep more information about the output destination. Add accessors to retrieve the filter and output settings in the original string form; this to be used to set up environment for a child process that also logs. * src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs accessors and modify the internals (including virLogDefineOutput()) to save the data needed for the accessors
-
由 Amy Griffis 提交于
* src/util/util.[ch]: Add virFileAbsPath() function to ensure an absolute path for a potentially realtive path. * src/libvirt_private.syms: add it in libvirt private symbols
-
- 07 10月, 2009 1 次提交
-
-
由 Ryota Ozaki 提交于
The patch implements the missing memory control APIs for lxc, i.e., domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves domainGetInfo to return proper amount of used memory via cgroup. * src/libvirt_private.syms: Export virCgroupGetMemoryUsage and add missing virCgroupSetMemory * src/lxc/lxc_driver.c: Implement missing memory functions * src/util/cgroup.c, src/util/cgroup.h: Add the function to get used memory
-
- 06 10月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
Will be used by test driver node device implementation. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 02 10月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Implementation of tunnelled migration, using a Unix Domain Socket on the qemu backend. Note that this requires very new versions of qemu (0.10.7 at least) in order to get the appropriate bugfixes. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 30 9月, 2009 3 次提交
-
-
由 Mark McLoughlin 提交于
* src/util/storage_file.c: add virStorageFileGetMetadata() so that the caller does not need to open the file
-
由 Mark McLoughlin 提交于
Finally, we get to the point of all this. Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD() and move to src/util/storage_file.[ch] There's no functional changes in this patch, just code movement * src/storage/storage_backend_fs.c: move code from here ... * src/util/storage_file.[ch]: ... to here * src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
-
由 Mark McLoughlin 提交于
Rename virStorageVolFormatFileSystem to virStorageFileFormat and move to src/util/storage_file.[ch] * src/Makefile.am: add src/util/storage_file.[ch] * src/conf/storage_conf.[ch]: move enum from here ... * src/util/storage_file.[ch]: .. to here * src/libvirt_private.syms: update To/FromString exports * src/storage/storage_backend.c, src/storage/storage_backend_fs.c, src/vbox/vbox_tmpl.c: update for above changes
-
- 29 9月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
* include/libvirt/libvirt.h.in: Public API contract for virStreamPtr object * src/libvirt_public.syms: Export data stream APIs * src/libvirt_private.syms: Export internal helper APIs * src/libvirt.c: Data stream API driver dispatch * src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr object * src/driver.h: Define internal driver API for streams * .x-sc_avoid_write: Ignore src/libvirt.c because it trips up on comments including write() * python/Makefile.am: Add libvirt-override-virStream.py * python/generator.py: Add rules for virStreamPtr class * python/typewrappers.h, python/typewrappers.c: Wrapper for virStreamPtr * docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate with new APIs
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorMigrateToCommand() API * src/qemu/qemu_driver.c: Switch over to using the qemuMonitorMigrateToCommand() API for core dumps and save to file APIs
-
- 22 9月, 2009 1 次提交
-
-
由 Ryota Ozaki 提交于
* src/conf/domain_conf.c: Don't assume all virDomainObjPtr have a non-NULL monitor_chr field in virDomainObjFormat. * src/lxc/lxc_driver.c: Implement suspend/resume driver APis * src/util/cgroup.c, src/util/cgroup.h: Support the 'freezer' cgroup controller * src/libvirt_private.syms: Export virCgroupSetFreezerState and virCgroupGetFreezerState
-