Use qemuDomainStorageSourceAccessModify with correct flags to do the
job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Some operations e.g. namespace setup are not necessary when modifying
access to a file which the VM can already access. Add a flag which
allows to skip them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In some cases when we need to modify access permissions for a storage
source which is already used by the VM we should not revoke all
permissions on a failure. Allow this in qemuDomainStorageSourceAccessModify
by adding a new flag.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than jumping to the correct label use a set of booleans to
determine which operation needs to be rolled back. This will allow more
flexibility when e.g. rollback after a failed operation will not be
necessary/desired.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new flag which will set the image as read-only even if the image
data allows writing.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuDomainStorageSourceAccessModify instead of the individual calls.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new flag QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_CHAIN to select whether
to work on single image or full chain.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Upcoming patches will add a few more flags. Add an enum to collect them
so that we don't end up with multiple bools.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function will be able to deal with non-chains too so drop 'Chain'
and also change the suffix to 'Modify' as it's used both for setup and
teardown.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce qemuDomainStorageSourceChainAccess(Allow|Revoke) as entry
points to qemuDomainStorageSourceChainAccessPrepare for symmetry with
the functions for single backing chain elements.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Move it to qemu_domain.c and call it
qemuDomainStorageSourceChainAccessPrepare.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuDomainStorageSourceAccess(Allow|Revoke) instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Fedora 30 is out, which means that Fedora 28 is going to be
EOL very soon. Let's get ahead of the game and drop support
for it right now.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Most releases don't need a "Removed features" section so don't include
it in the template by default, but leave a reminder in case it is
relevant.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

GitLab CI provides some shared build runners that use Docker containers.
This resource can usefully run cross-compiled builds since all other CI
build testing is currently x86 only, and Travis CI is already very busy
testing native builds.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If the source tree was freshly configured and no objects are
built yet then 'make check-access' has no test to run. Build
the sources beforehand.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Introduced by ff376c62.

Previously, init_syms() was called from stat() mock and its
friends. This is crucial because checkPath() might call
printFile() which in turn calls real_fopen(). But if stat() or
one of its friends is the first function called then because of
lacking init_syms() call no real_* is initialized.

The other thing is that we really want the recorded action to be
"stat" instead of __FUNCTION__ because there's no good in
recording that it was __xstat64 who touched some file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If a program that is using this mock calls canonicalize_file_name()
as the very first function then it will face SIGSEGV because
real_canonicalize_file_name is uninitialized.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

In addition adjusting iothreads-virtio-scsi-ccw.s390x-latest.args to prevent
accidential drive id exposure by QEMU fixed by commit a1dce962
(qemu: Use the 'device_id' property of SCSI disks to avoid regressing),
and also adjusting *s390x-latest.args files to qemu deprecation changes made
in commit e8c2c8bd (Prefer '-overcommit mem-lock' over -realtime mlock').
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Rather than duplicate a list of storage pool backends on the
drivers.html page, let's just link directly to the storage driver
page similar to how the node device driver is done.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Capture and update the 4.0.0 qemu version replies now that it was
released. I opted to keep the CPU differences as there was a qemu bug
which reported an empty string in CPU caps.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Prepare section for boolean queries and make the typed query section
more clear.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We treated broken schema as failure to look up given query. Treat it as
a separate error instead. It is unlikely to happen though.

Also prepare for possibility of user errors if query components which
can't be queired deeper have following components.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce an array of callbacks for given 'meta-type' of the QAPI schema
structure rather than using code to select it. This will simplify
extension for the other meta-types which are not handled yet.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than modifying the context struct add a helpers that does this.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that 'query' is no longer an argument we can reuse it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Create a context data type for the QAPI path rather than passing an
increasing number of arguments.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virQEMUQAPISchemaTypeFromObject and virQEMUQAPISchemaTypeFromObject
can be very easily folded into virQEMUQAPISchemaTraverseObject removing
the need for the helpers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Simplify virQEMUQAPISchemaTraverse by separating out the necessary
operations for given 'meta-type' into separate functions.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Return 1 if the schema entry was found optionally returning it rather
than depending on the returned object.

Some callers don't care which schema object belongs to the query, but
rather only want to know whether it exists. Additionally this will allow
introducing boolean queries for checking if enum values exist.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>