In upcoming patches we will need only some portions of the PCI
address. To construct that easily, it's better if the PCI address
of a device is stored as four integers rather than one string.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Have just one function to generate path to a PCI driver so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Have just one function to generate path to a PCI device so that
when we change it in near future there's only few of the places
we need to fix.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In near future, we will be creating devices under different
location and just symlink them under devices/. Just like real
kernel does. But for that we need the directories to exist.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

We will need to create more directories and instead of
introducing bunch of new variables to hold their actual
paths, we can have one and reuse it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The @fakesysfspcidir is derived from @fakerootdir. We don't need
two global variables that contain nearly the same content,
especially when we construct the actual path anyways.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

It saves us couple of lines.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

When creating a PCI device, the pciDevice structure contains @id
member which holds device address (DDDD.BB:DD.F) and is type of
'char *'. But the structure is initialized from a const char and
in fact we never modify or free the @id.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Newer kernels (v3.16-rc1~29^2~6^4) have 'driver_override' file
which simplifies way of binding a PCI device to desired driver.
Libvirt has support for this for some time too (v2.3.0-rc1~236),
but not our virpcimock. So far we did not care because our code
is designed to deal with this situation. Except for one.
hypothetical case: binding a device to the vfio-pci driver can be
successful only via driver_override. Any attempt to bind a PCI
device to vfio-pci driver using old method (new_id + unbind +
bind) will fail because of b803b29c. While on vanilla kernel
I'm able to use the old method successfully, it's failing on RHEL
kernels (not sure why).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This reverts commit b70c093f.

In next commit the virpcimock is going to be extended and thus
binding a PCI device to vfio-pci driver will finally succeed.
Remove this test as it will no longer make sense.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The pci_driver_bind() and pci_driver_unbind() functions are
"internal implementation", meaning other parts of the code should
be able to call them and get the job done. Checking for actions
(PCI_ACTION_BIND and PCI_ACTION_UNBIND) should be done in
handlers (pci_driver_handle_bind() and
pci_driver_handle_unbind()). Surprisingly, the other two actions
(PCI_ACTION_NEW_ID and PCI_ACTION_REMOVE_ID) are checked already
at this level.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

virErrorPreserveLast()/virErrorRestore() (added in commit 8333e745
back in 2017), do a better better job of saving and restoring the last
libvirt error than virSaveLastError()/virErrorRestore() (they're
simpler, and they also save/restore the system errno).
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

During networkPortCreateXML, if networkAllocatePort() failed,
networkReleasePort() would be called, which would (in the case of
network pools of macvtap passthrough devices) attempt to find the
allocated device by comparing port->plug.direct.linkdev to each device
in the pool. Since port->plug.direct.linkdev was still NULL, the
attempted strcmp would result in a SEGV.

Calling networkReleasePort() during error cleanup is something that
should only be done if networkAllocatePort() has already succeeded. It
turns out there is one other possible error exit from
networkPortCreateXML() that happens after networkAllocatePort() has
succeeded, so the code to call networkReleasePort() was just moved
down to there.

Resolves: https://bugzilla.redhat.com/1741390Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit e69444e1 (first appeared in libvirt-5.5.0) added the new value
"VIR_ACCESS_PERM_NETWORK_SEARCH_PORTS" to the virAccessPerNetwork
enum, and also the string "search_ports" to the VIR_ENUM_IMPL() macro
for that enum. Unfortunately, the enum value was added in the middle
of the list, while the string was added to the end of the
VIR_ENUM_IMPL().

This patch corrects that error by moving the new value to the end of
the enum definition, so that the order matches that of the string
list.

Resolves: https://bugzilla.redhat.com/1741428Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we support blockdev for qemuDomainBlockCopy we can allow
copying to remote destinations as well.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.

When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.

This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than copying just the top level image, let's copy the full user
provided backing chain.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The only code path which calls the parser with the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE is from qemuDomainBlockCopy. Since that
code path can properly handle backing chains for the disk and it's
desired to pass the parsed chains to the block copy code remove the
condition which prevents parsing the <backingStore> element.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In commit 3f93884a where the job handling of commit jobs with
blockdev was added I've forgot to add a 'break' in the switch fomatting
the status XML. Thankfully this would not be a problem as the cases
where this fell through didn't have any code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The utility of the function is extremely limited as for block copy
we need to register the mirror chain earlier than when it's set with the
disk. This means that it would be open-coded in that case.

Avoid any weird usage and just open-code the only current usage, remove
the function, and reword the docs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit 16ca234b refactored how the 'shallow' and 'reuse' flags
are accessed but neglected to fix the clearing of 'shallow' in case when
the disk has no backing chain. This means that we'd request a shallow
copy even without backing chain and also a few checks would work wrong.

Fix it by using the extracted variable everywhere.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Allow reusing original backing chain when doing a shallow copy without
reuse of external image. The existing logic didn't allow it but it will
be possible. Also add a note to explain that logic.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rename qemuDomainObjPrivateXMLFormatBlockjobFormatChain to
qemuDomainObjPrivateXMLFormatBlockjobFormatSource and add a 'chain'
parameter which allows controlling whether the backing chain is
formatted.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function ignores all errors from qemuStorageLimitsRefresh by calling
virResetLastError. This still logs them. Since qemuStorageLimitsRefresh
allows suppressing some, do so.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuStorageLimitsRefresh uses qemuDomainStorageOpenStat internally and
there are callers which don't care about the error. Propagate the
skipInaccessible flag so that we can log less errors.

Callers currently don't care about the return value change.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

None of the callers of qemuDomainStorageUpdatePhysical care about
errors.

Use the new flag for qemuDomainStorageOpenStat which suppresses some
errors and move the reset of the rest of the uncommon errors into this
function. Document what is happening in a comment for the function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virStorageSourceUpdatePhysicalSize is called only from
qemuDomainStorageUpdatePhysical and all callers of it reset the libvirt
error if -1 is returned.

Don't bother setting the error in the first place.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Some callers of this function actually don't care about errors and reset
it. The message is still logged which might irritate users in this case.

Add a boolean flag which will do few checks whether it actually makes
sense to even try opening the storage file. For local files we check
whether it exists and for remote files we at first see whether we even
have a storage driver backend for it in the first place before trying to
open it.

Other problems will still report errors but these are the most common
scenarios which can happen here.

This patch changes the return value of the function so that the caller
is able to differentiate the possibilities.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function will be reused in the qemu snapshot code. The argument is
turned into const similarly to the other virStorageFileSupports*
functions.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If the nbd export name contains a colon, our parser would not parse it
properly as we split the string by colons. Modify the code to look up
the exportname and copy any trailing characters as the export name is
supposed to be at the end of the string.

https://bugzilla.redhat.com/show_bug.cgi?id=1733044Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Use 'id' instead of 'name' for anchors which adds the hidden clickable
headerlink helper so it's way simpler to link to a specific part of the
docs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The parent bridge configuration of the current device
should be read and reset, instead of reading the current
device configuration.
Signed-off-by: NHe Xin <hexin15@baidu.com>
Signed-off-by: NLiu Qi <liuqi16@baidu.com>
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In some cases e.g. with clang on fedora 30 __open2 isn't even declared
which results in the following build error:

/home/pipo/libvirt/tests/virpcimock.c:939:1: error: no previous prototype for function
      '__open_2' [-Werror,-Wmissing-prototypes]
__open_2(const char *path, int flags)

Add a separate declaration to appease the compiler.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Since users can enable/disable drivers at compile time, it may
happen that @drivers array is in fact empty (in both its
occurrences within the function). This means that
ARRAY_CARDINALITY() returns 0UL which makes gcc unhappy because
of loop condition:

  i < ARRAY_CARDINALITY(drivers)

GCC complains that @i is unsigned and comparing an unsigned value
against 0 is always false. However, changing the type of @i to
ssize_t is not enough, because compiler still sees the unsigned
zero. The solution is to typecast the ARRAY_CARDINALITY().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Hold on to your hat, this is going to be a wild ride. As nearly
nothing in glibc, nor open() is a real function. Just look into
bits/fcntl2.h and you'll see that open() is actually a thin
wrapper that calls either __open_alias() or __open_2(). Now,
before 801ebb5e the open() done in
virPCIDeviceConfigOpenInternal() had a constant oflags (we were
opening the pci config with O_RDWR). And since we were not
passing any mode nor O_CREAT the wrapper decided to call
__open_alias() which was open() provided by our mock. So far so
good. But after the referenced commit, the oflags is no longer
compile time constant and therefore the wrapper calls __open_2()
which we don't mock and thus the real __open_2() from glibc was
called and thus we did try to open real path from host's /sys.
This of course fails with variety of errors.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The gdb requires ptrace capability, but the way we run containers
now is that they drop every capability. Preserve SYS_PTRACE then.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Introduced in commit 4a6ee535.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
(cherry picked from commit df1b5cf0)

Reintroduced-by: fb275b76Signed-off-by: NJán Tomko <jtomko@redhat.com>

Add virStorageFileSupportsCreate which allows silent check whether
virStorageFileCreate is implemented.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Modify the return value so that callers don't have to repeat logic.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>