for memory limits since unset ones are no longer zero
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

This NIC model is supported on hardware version 8 and newer and libvirt
ESX driver does support those.

For VBOX it's most likely that the connection is vbox:///session and it
runs with local non-root account. This caused permission denied when
LOCALSTATEDIR was used to create temp file. This patch makes use of the
virGetUserCacheDirectory to address this problem for non-root users.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit c9027d8f added a detection of NIC HW features, but some of them
are not available in old kernel.  Very old kernels lack enum
ethtool_flags and even if this enum is present, not all values are
available for all kernels.  To be sure that we have everything in kernel
that we need, we must check for existence of most of that flags, because
only few of them were defined at first.

Also to successfully build libvirt with older kernel we need to include
<linux/types.h> before <linux/ethtool.h> to have __u32 and friends
defined.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

as soon as x32 architecture is also supported

We've never formatted them on the qemu command line.

https://bugzilla.redhat.com/show_bug.cgi?id=1164053

Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.

Coverity complains that "net_set" is compared to NULL before calling
xen_network_set_free, but used rather liberally before that.  While
I was looking at the code I also noted that if the virAsprintfQuiet
fails, then we leak our structures - so I added those too.

Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference

Coverity points out that check (def->uuid) has no effect since it's not
a pointer, rather an array of characters.   Just remove the extranous check.

Since inception.  Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"

Commit id 'c9027d8f' added parsing of the CapNet for offload SRIOV NIC
discovery, but forgot to free the nodes

Add qemuDomainPinIOThread to handle setting the CPU affinity
for a specific IOThread

https://bugzilla.redhat.com/show_bug.cgi?id=1135491

More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.

NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.

Implement the remote plumbing.

Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo

The API supports updating both the --live domain and the --config data

This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Every API that touches internal structure of the object must lock
the object first. Not every API that has the object as an
argument needs to do that though. Some APIs just pass the object
to lower layers which, however, must lock the object then. Look
at the code, you'll get my meaning soon.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Later we can turn APIs to lock the object if needed instead of
relying on caller to mutually exclude itself (probably done by
locking a big lock anyway).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The functions and their QMP and HMP implementations are no longer needed
since everything is now done via the *AllStats functions.

Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.

Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636

In the LXC driver, if the disk path is not provided the API returns
total statistics for all disks of the domain. With the new text monitor
implementation this can be now done in the qemu driver too.

Add code that wil total the stats for all disks if the path is not
provided.

Extract the code to look up the disk alias and return the block stats
struct so that it can be reused later in qemuDomainBlockStatsFlags.

The function uses qemuMonitorGetAllBlockStatsInfo instead of
qemuMonitorGetBlockStatsInfo.

Our virDomainBlockStatsFlags API uses the old approach where, when it's
called without the typed parameter array, returns the count of parameters
supported by qemu.

The supported parameter count is obtained via separate monitor calls
which is a waste since we can calculate it when gathering the data.

This patch adds code to the qemuMonitorGetAllBlockStatsInfo workers that
allows to track the count of supported fields reported by qemu and will
allow to remove the old duplicate code.

The function that is extracting block stats data from the QMP monitor
reply contains a lot of repeated code. Since I'd be changing each of the
copies in the next patch, lets convert it to a macro right away.

Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.

This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.

The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.

Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.

The error count statistic is not supported by qemu, so there's no need
to pass the variables around if the result is ignored anyways.

All the setters are the same code except for parameter name and
variable, so they can be converted to a macro to save a ton of
duplicated code.

and their settings differ from common cpumask
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>