We have several directories that are created on the fly, and which
only contain state relevant to a running libvirtd process (all
located in /var/run).  Since the directories are created as needed,
and make no sense without a running libvirtd, we want them deleted
if libvirt is uninstalled.  And in F15 and newer, /var/run is on
tmpfs (forcing us to recreate on the fly); which means that someone
trying to verify a complete rpm will fail if the directory does not
currently exist because libvirtd has not been started since boot.
The solution, then, is to mark the directories as %ghost, so that
rpm knows that we own them and will clean it up if libvirt is
uninstalled, but will no longer create the directory for us at
install, nor complain at verify time if the directory does not exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=656611.

* libvirt.spec.in (%files): Add %ghost to temporary directories
that we don't install, but want cleaned up on libvirt removal.

Not only was ctl->quit accessed without a mutex but unfortunately,
virEventAddTimeout only interrupts the poll when event loop is running
so the hack needs to add a timeout that will make next poll return
immediately without blocking.

Detected by Coverity. Leak introduced in commit 90074ecf.
Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Detected by Coverity. Leak introduced in commit c1df2c14.

Two bugs here:
1. memory leak on successful parse
2. failure to parse still returned success
Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Detected by Coverity.  Leak introduced in commit 8866eed0.

Two bugs here:
1. logfd wasn't closed on all return paths
2. if we failed to mark a domain autodestroy, then the domain
was not made transient but we still returned success
Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Detected by Coverity. Leak introduced in commit 673adba5.

Two separate bugs here:
1. call was not freed on all error paths
2. virCondDestroy was called even if virCondInit failed
Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Detected by Coverity. Leak introduced in commit 0873b688.
Signed-off-by: NAlex Jia <ajia@redhat.com>

Detected by Coverity. Leak introduced in commit 109efd79.
Signed-off-by: NAlex Jia <ajia@redhat.com>

To add support for running libvirt on PowerPC, a CPU driver for the
PowerPC platform must be added.
Most generic cpu driver routines such as CPU compare, decode, etc
are based on CPUID comparison and are not relevant for non-x86
platforms.
Here, we introduce stubs for relevant PowerPC routines invoked by libvirt.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NAnton Blanchard <anton@au.ibm.com>

filter 0-device-weight when:

  - getting blkio parameters with --config
  - starting up a domain

When testing with blkio, I found these issues:

  (dom is down)
  virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,500
  virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,0
  virsh blkiotune dom
  weight         : 800
  device_weight  : /dev/sda,200,/dev/sdb,0

  # issue 1: shows 0 device weight of /dev/sdb that may confuse user

  (continued)
  virsh start dom

  # issue 2: If /dev/sdb doesn't exist, libvirt refuses to bring the
  # dom up because it wants to set the device weight to 0 of a
  # non-existing device. Since 0 means no weight-limit, we really don't
  # have to set it.

Prior to this patch, for a running dom, the commands:

$ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498
$ virsh blkiotune dom --device-weights /dev/sda,503
$ virsh blkiotune dom
weight         : 500
device_weight  : /dev/sda,503

claim that /dev/sdb no longer has a non-default weight, but
directly querying cgroups says otherwise:

$ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device
8:0     503
8:16    498

After this patch, an explicit 0 is required to remove a device path
from the XML, and omitting a device path that was previously
specified leaves that device path untouched in the XML, to match
cgroups behavior.

* src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename...
(qemuDomainParseDeviceWeightStr): ...and use correct type.
(qemuDomainSetBlkioParameters): After parsing string, modify
rather than replacing existing table.
* tools/virsh.pod (blkiotune): Tweak wording.

The next patch will make it possible to have virDomainSetBlkioParameters
leave device weights unchanged if they are not mentioned in the incoming
string, but this only works if the list of block weights does not allow
duplicate paths.  Technically, a user can still confuse libvirt by
passing alternate spellings that resolve to the same device, but it
is not worth worrying about working around that kind of abuse.

* src/conf/domain_conf.c (virDomainDefParseXML): Require unique
paths.

When setting both blkio weight and device-weights at the same time, the weight
is lost. Fix it.

Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Python support for both setting and getting block I/O throttle.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Support virsh command blkdeviotune. Can set or query a block disk
I/O throttle setting.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement the block I/O throttle setting and getting support to qemu
driver.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Enable block I/O throttle for per-disk in XML, as the first
per-disk IO tuning parameter.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Support Block I/O Throttle setting and query to remote driver.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/libvirt.c: Free user directory path

The virTimestamp and virTimeMs functions in src/util/util.h
duplicate functionality from virtime.h, in a non-async signal
safe manner. Remove them, and convert all code over to the new
APIs.

* src/util/util.c, src/util/util.h: Delete virTimeMs and virTimestamp
* src/lxc/lxc_driver.c, src/qemu/qemu_domain.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/util/event_poll.c: Convert to use
  virtime APIs

Use the new virTimeStringNowRaw() API for generating log timestamps
in an async signal safe manner

* src/util/logging.c: Use virTimeStringNowRaw

The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.

Introduce a new internal API which is async signal safe.

  virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
                      where available, otherwise falls back to the unsafe
                      gettimeofday

  virTimeFieldsNowRaw  replacements for gmtime(), convert a timestamp
  virTimeFieldsThenRaw into a broken out set of fields. No localtime()
                       replacement is provided, because converting to
                       local time is not practical with only async signal
                       safe APIs.

  virTimeStringNowRaw  replacements for strftime() which print a timestamp
  virTimeStringThenRaw into a string, using a pre-determined format, with
                       a fixed size buffer (VIR_TIME_STRING_BUFLEN)

For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe

* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs

Fix the build on Mingw32 by removing the now obsolete
virGetPMCapabilities symbol from the private exports file

* src/libvirt_private.syms: Remove virGetPMCapabilities

If suspend failed for some reason (e.g. too short duration) then
subsequent attempts to trigger suspend were rejected because we
had already marked a suspend as being in progress

* src/util/virnodesuspend.c: Don't mark suspend as active
  until we've successfully triggered it

* src/lxc/lxc_conf.c, src/uml/uml_conf.c,
  src/xen/xen_hypervisor.c: Initialize suspend capabilities
* tests/xencapsdata/*xml: Add empty powermgmt capabilities

The command name for the suspend action does not need to be
strdup'd. The constant string can be used directly. This
also means the code can be trivially rearranged to make the
switch clearer

* src/util/virnodesuspend.c: Remove strdup of cmdString

To avoid probing the host power management features on any
call to virInitialize, only initialize the mutex in
virNodeSuspendInit. Do lazy load of the supported PM target
mask when it is actually needed

* src/util/virnodesuspend.c: Lazy init of supported features

If we ensure that virNodeSuspendGetTargetMask always resets
*bitmask to zero upon failure, there is no need for the
powerMgmt_valid field.

* src/util/virnodesuspend.c: Ensure *bitmask is zero upon
  failure
* src/conf/capabilities.c, src/conf/capabilities.h: Remove
  powerMgmt_valid field
* src/qemu/qemu_capabilities.c: Remove powerMgmt_valid

* src/libvirt_private.syms: Export virNodeSuspendSupportsTarget
  and virNodeSuspendGetTargetMask

The node suspend capabilities APIs should not have been put into
util.[ch]. Instead move them into virnodesuspend.[ch]

* src/util/util.c, src/util/util.h: Remove suspend capabilities APIs
* src/util/virnodesuspend.c, src/util/virnodesuspend.h: Add
  suspend capabilities APIs
* src/qemu/qemu_capabilities.c: Include virnodesuspend.h

Rename virGetPMCapabilities to virNodeSuspendGetTargetMask and
virDiscoverHostPMFeature to virNodeSuspendSupportsTarget.

* src/util/util.c, src/util/util.h: Rename APIs
* src/qemu/qemu_capabilities.c, src/util/virnodesuspend.c: Adjust
  for new names

Since virDiscoverHostPMFeature is just checking one feature,
there is no reason for it to return a bitmask. Change it to
return a boolean

* src/util/util.c, src/util/util.h: Make virDiscoverHostPMFeature
  return a boolean

The virHostPMCapability enum helper was declared in util.h
but implemented in capabilities.c, which is in a completely
separate library at link time. Move the declaration into the
capabilities.c file and rename it to match normal conventions

* src/util/util.h: Remove virHostPMCapability enum decl
* src/conf/capabilities.c: Add virCapsHostPMTarget enum

The capabilities XML uses the x86 specific terms 'S3', 'S4'
and 'Hybrid-Syspend'. Switch it to use the same terminology
as the API constants and virsh options, eg 'suspend_mem'
'suspend_disk' and 'suspend_hybrid'

* docs/formatcaps.html.in, docs/schemas/capability.rng,
  src/conf/capabilities.c: Rename suspend constants

The internal virHostPMCapability enum just duplicates the
public virNodeSuspendTarget enum, but with different names.

* src/util/util.c: Use VIR_NODE_SUSPEND_TARGET constants
* src/util/util.h: Remove virHostPMCapability enum
* src/conf/capabilities.c: Use VIR_NODE_SUSPEND_TARGET_LAST

The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.

* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
  values
* src/util/virnodesuspend.c: Fix suspend target checks

Detected by Coverity. the only case is caller passes a NULL to 'format' variable,
then taking 'if (format)' false branch, the function qcow2GetBackingStoreFormat
will directly dereferences the NULL 'format' pointer variable.
Signed-off-by: NAlex Jia <ajia@redhat.com>

Fix cmdDomblklist to return 'true' on success instead of '0'

https://bugzilla.redhat.com/show_bug.cgi?id=758590Signed-off-by: NAlex Jia <ajia@redhat.com>

This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>