There is a little difference between the output of domxml-to-native and the actual commandline.
No matter qemu is in control or readline mode, domxml-to-native always converts it to readline mode.

That is because the parameter "monitor_json" for qemuBuildCommandLine() is always set to false
in qemuDomainXMLToNative().
Signed-off-by: Ntangchen <tangchen@cn.fujitsu.com>

Clarify some of the effects of managed passthrough <hostdev> devices;
with recent changes (commit d0935478), a nodedev-reattach is only needed
to pair up to an explicit nodedev-dettach (but beware that older
virt-manager has a bug where it uses explicit nodedev-dettach under the
hood when using the gui to hotplug a hostdev device).

* docs/formatdomain.html.in: Mention reattach.
* tools/virsh.pod (nodedev): Mention managed mode.

Stub out a complete impl of virFileOpenTty to avoid unused
parameter warnings

* src/util/util.c: Fix virFileOpenTty on Win32

Adds two options, inbound and outbound, to attach-interface to set
bandwidth when attaching interfaces

The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.

Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* .gitignore: Add exemption.

Add test cases for parsing the qemu-name-space.
This is based on qemuxml2argv{test,data/}, but can not reside in
qemuxml2argv{test,data/} because ...

1. qemuxmlns-qemu-ns-domain.xml is not schema-valid and breaks
domainschematest. The test is still important to detect xmlns:qemu
bindings to a name-space other than
http://libvirt.org/schemas/domain/qemu/1.0

2. they break qemuxml2xml, because the xmlns:qemu binding is moved to
the top-level <domain> element when converting from argv to xml.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

The XML parser for the qemu specific extensions expects the qemu name-space
to be bound to the 'qemu' prefix. This is too strict, since the name of the
name-space-prefix is only meant as an internal lookup key. Only the associated
URI is relevant.
<domain>...
  <qemu:commandline xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
  ...</qemu:commandline>
</domain>

<domain xmlns:ns0="http://libvirt.org/schemas/domain/qemu/1.0">...
  <ns0:commandline>
  ...</ns0:commandline>
</domain>

<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
  <qemu:commandline xmlns:qemu="urn:foo">
  ...</qemu:commandline>
</domain>

Remove the test for checking the name-space binding on the top-level <domain>
element. Registering the name-space with XPath is enough.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

When I compile libvirt with gcc-4.6.1 in ubuntu 11.10, got error as below:

  CCLD   libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_migration.o): undefined reference to symbol 'gnutls_x509_crt_get_dn@@GNUTLS_1_4'
/usr/bin/ld: note: 'gnutls_x509_crt_get_dn@@GNUTLS_1_4' is defined in DSO /usr/lib/x86_64-linux-gnu/libgnutls.so so try adding it to the linker command line
/usr/lib/x86_64-linux-gnu/libgnutls.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1

It can compile with gcc-4.5.2 in ubuntu 11.04, but it can not compile with gcc-4.6.1 in ubuntu 11.10.

I didn't find reason. Does Anyone know the reason or the different between gcc-4.5.2 and gcc-4.6.1?

I still provide a patch for this. Just make it is working now.
Signed-off-by: Nsoulxu <soulxu@soulxu-ThinkPad-T410.(none)>

The statement

        virBufferAdd(buf, "''", 2);

triggers a syntax-check warning

* src/util/buf.c: Replace virBufferAdd with virBufferAddLit

Signed-off-by: NPhilipp Hahn <hahn@univention.de>

This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme

We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML

* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
  src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
  functions

Make the empty string return '' to match cmdEcho's behavior.

Noticed when testing new libvirt against old qemu that lacked the
snapshot_blkdev HMP command.  Libvirt was mistakenly treating the
command as successful, and re-writing the domain XML to use the
just-created 0-byte file, rendering the domain broken on restart.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Notice another possible error message.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Don't keep 0-byte file
on failure.

When checking if we need to escape a single quote we were looking at the
character after the quote instead of at the quote itself.

compile error:
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuPrepareHostdevPCIDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:183: undefined reference to `pciDeviceListFind'
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:230: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuGetActivePciHostDeviceList':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:102: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuDomainReAttachHostdevDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:370: undefined reference to `pciDeviceListFind'
Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>

Waiting for qemu-kvm cleaning up the PCI bar(s) mapping with long time
while the device is not managed is just waste of time.

Tested with multiple AHCI controllers and multiple disks attached
to a controller. E.g.,

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk0.raw'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk1.raw'/>
      <target dev='sdb' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='1'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk2.raw'/>
      <target dev='sdc' bus='sata'/>
      <address type='drive' controller='1' bus='0' unit='0'/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </controller>
    <controller type='sata' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </controller>

Relatively straight-forward filtering.

* src/esx/esx_vi.h (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Add parameter.
* src/esx/esx_vi.c (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Allow leaf filtering.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames, esxDomainSnapshotNumChildren)
(esxDomainSnapshotListChildrenNames): Pass new flag through.

The referenced page does not exist, but locking.html has a section about
sanlock.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

probes.h is generated in build directory; setting a dependency on
probes.h from source directory doesn't work well in VPATH builds. Caused
by commit 1afcfbdd

The patch that fixes SIGTERM handling with -no-shutdown was taken into
0.15.1 stable release of qemu.

Signed-off-by: NPhilipp Hahn <hahn@univention.de>

When I run 'make dist', I receive the following error messages:
make[1]: Entering directory `/home/wency/source/libvirt/src'
  GEN    remote/remote_protocol.h
  GEN    remote/remote_protocol.c
  GEN    remote/qemu_protocol.h
  GEN    remote/qemu_protocol.c
  GEN    remote/qemu_client_bodies.h
  CC     libvirt_driver_remote_la-remote_protocol.lo
In file included from ./remote/remote_protocol.h:16,
                 from ./remote/remote_protocol.c:7:
/internal.h:249:23: error: probes.h: No such file or directory
make[1]: *** [libvirt_driver_remote_la-remote_protocol.lo] Error 1
make[1]: Leaving directory `/home/wency/source/libvirt/src'
make: *** [distdir] Error 1

The reason is that we use probes.h before generating it.

Check strdup return value and fail if error
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

BZ# https://bugzilla.redhat.com/show_bug.cgi?id=736214

The problem is caused by the original info of domain's PCI dev is
maintained by qemu_driver->activePciHostdevs list, (E.g. dev->reprobe,
which stands for whether need to reprobe driver for the dev when do
reattachment). The fields (dev->reprobe, dev->unbind_from_stub, and
dev->remove_slot) are initialized properly when preparing the PCI
device for managed attachment. However, when do reattachment, it
construct a complete new "pciDevice" without honoring the original
dev info, and thus the dev won't get the original driver or can get
other problem.

This patch is to fix the problem by get the devs from list
driver->activePciHostdevs.

Tested with following 3 scenarios:
  * the PCI was bound to some driver not pci-stub before attaching

    result: the device will be bound to the original driver

  * the PCI was bound to pci-stub before attaching

    result: no driver reprobing, and still bound to pci-stub

  * The PCI was not bound to any driver

    result: no driver reprobing, and still not bound to any driver.

Commit 0472f39f plugged a leak, but introduced another bug:

Actually looks like physfndev is conditionally allocated in getPhysfnDev
Its better to modify getPhysfnDev to allocate physfndev every time.

A few people have attempted to use the new forwarding modes with older
versions of libvirt. The docs where the modes are described have
always stated the minimum required libvirt version, but the examples
at the end didn't, which I believe is what has caused the confusion.

Similarly, the section on portgroups now has a version tag added at
the beginning.

I also noticed that there was no example of defining a <dns> hostname,
so I added one, as well as making the domain name example more
recognizable (by adding ".com" to the domain).

Explicitly disallow conflicts between domain name from dxml and dname.

When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.

How to reproduce:
  1) Define two domains with same PCI device defined in the confs.
  2) # virsh start domain1
  3) # virsh start domain2
  4) # virsh nodedev-reattach $pci_device

You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).

This patch is to prohibit the bug by:
  1) Prohibit a domain starting or device attachment right at
     preparation period (qemuPrepareHostdevPCIDevices) if the
     device is in list driver->activePciHostdevs, which means
     it's used by other domain.

  2) Introduces a new field for struct _pciDevice, (const char *used_by),
     it will be set as the domain name at preparation period,
     (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
     the device from driver->activePciHostdevs if it's still used by
     other domain when stopping the domain process.

* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
    pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
    implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
    qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
    device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
    changed)
Signed-off-by: NEric Blake <eblake@redhat.com>

virInitialize() → xenRegister() → xenhypervisorInit() determines the
version of the Hypervisor. This breaks xencapstest when building as root
on a dom0 system, since xenHypervisorBuildCapabilities() adds the "hap"
and "viridian" features based on the detected version.

Add an optional parameter to xenhypervisorInit() to disable automatic
detection of the Hypervisor version. The passed in arguments are used
instead.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Calling virInitialize() → xenRegister() → xenhypervisorInit() directly
opens a connection to the Xen Hypervisor, which breaks some unit tests.

Move all static variables into a struct to make it easier to override
them when testing.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Coverity detected that the only way to get to the cleanup label
is if objectSpec had been successfully allocated, so the null
check was dead code.

* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Drop
redundant null check.

When defining macros, you can't put comments on the end of the
line because they will get included in the macro definition

* mingw32-libvirt.spec.in: Fix comment about hyperv

Detected by Coverity.  Leak present since commit ca3b22bb.

* src/util/macvtap.c (doPortProfileOp8021Qbh): Release device name.

Detected by Coverity.  Leak introduced in commit 72de0d28.

* src/qemu/qemu_migration.c (qemuMigrationCookieGraphicsXMLParse):
Clean up on success.