- 24 7月, 2014 3 次提交
-
-
由 John Ferlan 提交于
Create a separate typedef for the hostdev union data describing USB. Then adjust the code to use the new pointer
-
由 Martin Kletzander 提交于
This patch adds back the virDomainDef typedef into domain_conf and makes all the numatune_conf functions independent of any virDomainDef definitions. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1122205 Although the edits were changing in-memory XML, it was not flushed to disk; so unless some other action changes XML, a libvirtd restart would lose the changed information. * src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter, to save live status across restarts. (virDomainSaveXML): Allow for test driver. * src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust signature. * src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller. * src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise. * src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise. * src/test/test_driver.c (testDomainSetMetadata): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 23 7月, 2014 6 次提交
-
-
由 Ján Tomko 提交于
For the values "default", "on", "off" Replaces virDeviceAddressPCIMulti virDomainFeatureState virDomainIoEventFd virDomainVirtioEventIdx virDomainDiskCopyOnRead virDomainMemDump virDomainPCIRombarMode virDomainGraphicsSpicePlaybackCompression
-
由 Peter Krempa 提交于
The patch described above introduced two problems caught by the compiler and thus breaking the build. One of the problems was comparison of unsigned with < 0 and the second one jumped a variable init.
-
由 Chen Hanxiao 提交于
Before: virsh # dominfo chx3 State: shut off Max memory: 92160 KiB Used memory: 92160 KiB After: virsh # dominfo container1 State: shut off Max memory: 92160 KiB Used memory: 0 KiB Similar to qemu cases. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
由 Cédric Bosdonnat 提交于
-
由 Cédric Bosdonnat 提交于
Added <capabilities> in the <features> section of LXC domains configuration. This section can contain elements named after the capabilities like: <mknod state="on"/>, keep CAP_MKNOD capability <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability Users can restrict or give more capabilities than the default using this mechanism.
-
由 Chen Hanxiao 提交于
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e forbid us doing a fresh mount for sysfs when enable userns but disable netns. This patch will create a bind mount in this senario. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 18 7月, 2014 2 次提交
-
-
由 Cédric Bosdonnat 提交于
-
由 Cédric Bosdonnat 提交于
LXC network devices can now be assigned a custom NIC device name on the container side. For example, this is configured with: <interface type='network'> <source network='default'/> <guest dev="eth1"/> </interface> In this example the network card will appear as eth1 in the guest.
-
- 17 7月, 2014 4 次提交
-
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
There were numerous places where numatune configuration (and thus domain config as well) was changed in different ways. On some places this even resulted in persistent domain definition not to be stable (it would change with daemon's restart). In order to uniformly change how numatune config is dealt with, all the internals are now accessible directly only in numatune_conf.c and outside this file accessors must be used. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since there was already public virDomainNumatune*, I changed the private virNumaTune to match the same, so all the uses are unified and public API is kept: s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g then shrunk long lines, and mainly functions, that were created after that: sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g' And to cope with the enum name, I haad to change the constants as well: s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g Last thing I did was at least a little shortening of already long name: s/virDomainNumatuneDef/virDomainNumatune/g Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Michele Paolino 提交于
This patch adds support for the QEMU vhost-user feature to libvirt. vhost-user enables the communication between a QEMU virtual machine and other userspace process using the Virtio transport protocol. It uses a char dev (e.g. Unix socket) for the control plane, while the data plane based on shared memory. The XML looks like: <interface type='vhostuser'> <mac address='52:54:00:3b:83:1a'/> <source type='unix' path='/tmp/vhost.sock' mode='server'/> <model type='virtio'/> </interface> Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 16 7月, 2014 1 次提交
-
-
由 Roman Bogorodskiy 提交于
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order to allow adding platform specific implementations without making consumer worrying about specific implementation to be used. Also, rename util/virstatslinux.c to util/virstats.c so placing other platform specific implementations into this file don't look unexpected from the file name.
-
- 14 7月, 2014 1 次提交
-
-
由 Eric Blake 提交于
While preparing to add a capability for active commit, I noticed that the existing code was abusing int for boolean values. * src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost) (virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve types. * src/conf/capabilities.c (virCapabilitiesNew) (virCapabilitiesAddGuestFeature): Adjust signature. * src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update clients. * src/esx/esx_driver.c (esxCapsInit): Likewise. * src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise. * src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise. * src/openvz/openvz_conf.c (openvzCapsInit): Likewise. * src/parallels/parallels_driver.c (parallelsBuildCapabilities): Likewise. * src/phyp/phyp_driver.c (phypCapsInit): Likewise. * src/qemu/qemu_capabilities.c (virQEMUCapsInit) (virQEMUCapsInitGuestFromBinary): Likewise. * src/security/virt-aa-helper.c (get_definition): Likewise. * src/test/test_driver.c (testBuildCapabilities): Likewise. * src/uml/uml_conf.c (umlCapsInit): Likewise. * src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise. * src/vmware/vmware_conf.c (vmwareCapsInit): Likewise. * src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities): Likewise. * src/xenapi/xenapi_driver.c (getCapsObject): Likewise. * tests/qemucaps2xmltest.c (testGetCaps): Likewise. * tests/testutils.c (virTestGenericCapsInit): Likewise. * tests/testutilslxc.c (testLXCCapsInit): Likewise. * tests/testutilsqemu.c (testQemuCapsInit): Likewise. * tests/testutilsxen.c (testXenCapsInit): Likewise. * tests/vircaps2xmltest.c (buildVirCapabilities): Likewise. * tests/vircapstest.c (buildNUMATopology): Likewise. * tests/vmx2xmltest.c (testCapsInit): Likewise. * tests/xml2vmxtest.c (testCapsInit): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 11 7月, 2014 1 次提交
-
-
由 Chen Hanxiao 提交于
In lxc, we could not use setmem command with --config options. This patch will add support for this. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 09 7月, 2014 1 次提交
-
-
由 Chen Hanxiao 提交于
Currently @flag is not used yet. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 08 7月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
In the future we might need to track state of individual images. Move the readonly and shared flags to the virStorageSource struct so that we can keep them in a per-image basis.
-
- 07 7月, 2014 2 次提交
-
-
由 Ján Tomko 提交于
For inactive domains, set both current and maximum memory to the specified 'maximum memory' value. This matches the behavior of QEMU driver's SetMaxMemory. https://bugzilla.redhat.com/show_bug.cgi?id=1091132
-
由 Chen Hanxiao 提交于
We invoked virCgroupHasController twice for checking VIR_CGROUP_CONTROLLER_DEVICES in lxcDomainAttachDeviceDiskLive. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 04 7月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
Pass the virStorageSource struct to the auditing function and check if storage is local before auditing.
-
- 03 7月, 2014 4 次提交
-
-
由 Ján Tomko 提交于
They report errors in all other cases.
-
由 Ján Tomko 提交于
It sets the errno on all other errors, do it here too. Also report an error.
-
由 Ján Tomko 提交于
Replace: if (virBufferError(&buf)) { virBufferFreeAndReset(&buf); virReportOOMError(); ... } with: if (virBufferCheckError(&buf) < 0) ... This should not be a functional change (unless some callers misused the virBuffer APIs - a different error would be reported then)
-
由 Ján Tomko 提交于
So far, we only report an error if formatting the siblings bitmap in NUMA topology fails. Be consistent and always report error in virCapabilitiesFormatXML.
-
- 02 7月, 2014 1 次提交
-
-
由 Yue wenyuan 提交于
The comments for lxcDomainCreateXMLWithFiles are out of date. So update them. And add comments for lxcDomainCreateXML Signed-off-by: NWang Rui <moon.wangrui@huawei.com> Signed-off-by: NYue wenyuan <yuewenyuan@huawei.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 25 6月, 2014 1 次提交
-
-
由 Chen Hanxiao 提交于
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 24 6月, 2014 1 次提交
-
-
由 Chen Hanxiao 提交于
Fix lxcDomainGetMemoryParameters and lxcDomainGetSchedulerParametersFlags: virsh -c lxc:/// memtune DOMAIN error: Unable to get number of memory parameters error: unsupported flags (0x4) in function lxcDomainGetMemoryParameters Introduced by commit 399394. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 20 6月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
I'm going to add functions that will deal with individual image files rather than whole disks. Rename the security function to make room for the new one.
-
- 19 6月, 2014 2 次提交
-
-
由 Michal Privoznik 提交于
And add stubs to other drivers like: lxc, qemu, uml and vbox. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
For future work we want to get info for not only the free memory but overall memory size too. That's why the function must have new signature too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 06 6月, 2014 2 次提交
-
-
由 Eric Blake 提交于
As part of the work on backing chains, I'm finding that it would be easier to directly manipulate chains of pointers (adding a snapshot merely adjusts pointers to form the correct list) rather than copy data from one struct to another. This patch converts domain disk source to be a pointer. In this patch, the pointer is ALWAYS allocated (thanks in part to the previous patch forwarding all disk def allocation through a common point), and all other changse are just mechanical fallout of the new type; there should be no functional change. It is possible that we may want to leave the pointer NULL for a cdrom with no medium in a later patch, but as that requires a closer audit of the source to ensure we don't fault on a null dereference, I didn't do it here. * src/conf/domain_conf.h (_virDomainDiskDef): Change type of src. * src/conf/domain_conf.c: Adjust all clients. * src/security/security_selinux.c: Likewise. * src/qemu/qemu_domain.c: Likewise. * src/qemu/qemu_command.c: Likewise. * src/qemu/qemu_conf.c: Likewise. * src/qemu/qemu_process.c: Likewise. * src/qemu/qemu_migration.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/lxc/lxc_driver.c: Likewise. * src/lxc/lxc_controller.c: Likewise. * tests/securityselinuxlabeltest.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Ján Tomko 提交于
It already reports an error if STRDUP fails.
-
- 16 5月, 2014 1 次提交
-
-
由 Eric Blake 提交于
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type' to the enum name being converted; it looks silly to have functions with 'TypeType' in their name. Even though some of our enums have to have a 'Type' suffix, the corresponding string conversion functions do not. * src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType. * src/conf/storage_conf.h (VIR_ENUM_DECL): Rename virStoragePoolAuthType, virStoragePoolSourceAdapterType, virStoragePartedFsType. * src/conf/domain_conf.c (virDomainDiskDefParseXML) (virDomainFSDefParseXML, virDomainFSDefFormat): Update callers. * src/conf/secret_conf.c (virSecretDefParseUsage) (virSecretDefFormatUsage): Likewise. * src/conf/storage_conf.c (virStoragePoolDefParseAuth) (virStoragePoolDefParseSource, virStoragePoolSourceFormat): Likewise. * src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices): Likewise. * src/storage/storage_backend_disk.c (virStorageBackendDiskPartFormat): Likewise. * src/util/virstorageencryption.c (virStorageEncryptionSecretParse) (virStorageEncryptionSecretFormat): Likewise. * tools/virsh-secret.c (cmdSecretList): Likewise. * src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export corrected names. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 13 5月, 2014 1 次提交
-
-
由 Eric Blake 提交于
"Freezed" is not an English word. * src/lxc/lxc_driver.c (lxcFreezeContainer): Fix typo. * src/qemu/qemu_driver.c (qemuDomainSnapshotFSFreeze): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 30 4月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
The LXC controller itself needs to mknod the USB device node in /dev/bus/usb, so we can't block mknod permission from the cgroup. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 4月, 2014 1 次提交
-
-
由 Laine Stump 提交于
The check for a network being active during interface attach was being done individually in several places (by both the lxc driver and the qemu driver), but those places were too specific, leading to it *not* being checked when allocating a connection/device from a macvtap or hostdev network. This patch puts a single check in networkAllocateActualDevice(), which is always called before the any network interface is attached to any type of domain. It also removes all the other now-redundant checks from the lxc and qemu drivers. NB: the following patches are prerequisites for this patch, in the case that it is backported to any branch: 440beeb7 network: fix virNetworkObjAssignDef and persistence 8aaa5b68 network: create statedir during driver initialization b9e95491 network: change location of network state xml files 411c5486 network: set macvtap/hostdev networks active if their state file exists This fixes: https://bugzilla.redhat.com/show_bug.cgi?id=880483
-
- 25 4月, 2014 1 次提交
-
-
由 Nehal J Wani 提交于
Instead of hardcoding LIBEXECDIR as the location of the libvirt_lxc binary set in the LXC driver capabilities, use virFileFindResource to optionally find it in the current build directory. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-