Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.

As gluster natively supports multiple hosts for failover reasons we can
easily add the support to the storage driver code in libvirt.

Extract the code setting an individual host into a separate function and
call them in a loop. The new code also tries to keep the debug log
entries sane.

Avoid a large block by tweaking the condition skipping empty drives and
split up the switch containing two branches having different purpose.

The disk source formatting code grew rather ugly and complex and it will
get worse. Extract it into a separated function to contain the mess.

Extract the code so that it can be called from multiple places. This
also removes a tricky fallthrough in the large switch in
qemuBuildNetworkDriveStr.

The function builds also non-uri strings for the various protocols.

Allow using 'ssh' protocol in backing chains and later for disks
themselves.

iSCSI is a bit odd in this aspect since it only supports URIs but using
the 'filename' property and does not have any alternative syntax.

Along with the legacy URI based syntax add support for the brand-new
fully object based syntax.

http(s), ftp(s) and tftp use URIs for volume definitions in the JSON
pseudo protocol so it's pretty straightforward to add support for them.

JSON pseudo protocol for qemu allows to explicitly specify devices.
Add convertor to the internal type.

Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.

Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.

The object approach:
    json:{ "file" : { "driver":"file",
                      "filename":"/path/to/file"
                    }
         }

And a partially flattened approach:
    json:{"file.driver":"file"
          "file.filename":"/path/to/file"
         }

Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.

It's just read.

The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
 - if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
 used as default
 - otherwise the filename was concatenated with
 "<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
 "libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
 ignoring  all user settings in libvirt-admin.conf. This patch requires the
 config filename to be always provided as an argument with the concatenation
 being simplified.

 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364Signed-off-by: NErik Skultety <eskultet@redhat.com>

The function would generate a leading comma. Let the callers properly
add commas by formatting the commas at the end and trimming the trailing
one.

For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.

This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.

Move the iterator of objects to the recursive function so that nested
objects are supported by flattening the structure with '.' delimiters.

Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.

Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.

This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.

The new function is then reused to simplify qemucommandutiltest.

The iterator function (second argument) already requires that the object
is handled as 'const' thus we won't modify the object itself.

As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.

Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.

Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.

For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.

For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.

Since commit id 'fb063500' these are no longer called, so remove them

Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats.  Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.

A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:

"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"

To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.

VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".

BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Purely cosmetic change to be consistent with the other names.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Not all objects have a uuid, such as nodedevs. When we add events
support for them, NULL will be passed here, so handle it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1181539

QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: NDerbyshev Dmitry <dderbyshev@virtuozzo.com>

Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the ccw address set
from the domain definition.

Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.

Credit goes to Cole Robinson.

Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.

Credit goes to Cole Robinson.

The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.

Add a function that calculates the virtio serial address set
from the domain definition.

Credit goes to Cole Robinson.

Use virAsprintf to prepend an underscore to make the code more
readable.