In the auth config file, it is currently required to have
an entry for each hostname to connect to, eg

  [auth-libvirt-prod1.example.com]
  credentials=prod

This is inconvenient when there are large numbers of machines
all with the same credentials. Add support for a default
entry:

  [auth-default]
  credentials=prod

This checks forbids using "can not" and checks the placement
of some texinfo tags.

Drop it since we do not use texinfo and the check takes almost
twice as much as the rest of the checks.

This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

The check for whitespace before comma or semicolon referred
to comma as colon.

The macro is now called testAssertEq and no longer
takes an operator as its argument.

We do not need a separate check forbidding whitespace
after the opening parenthesis after a keyword -
we forbid it after all of them.

The only allowed whitespace after an opening parenthesis
is a newline, tune the regex to reflect that.

Instead of matching multiple characters before the parenthesis,
only check for a single whitespace, which is much less cpu-intensive.

This only matches a few dozen of places where they are on an separate
line, filter out those with a separate regex.

Instead of matching multiple characters, match any occurrence
preceded by a single whitespace and handle the exceptions
later.

We test whitespace with lots of other characters now.

Drop the op parameter, we only use equality.
Drop the vir prefix since it's only used in the tests.

To allow tightening syntax check.

Put the comma on the first line.

The prohibit_nonreentrant syntax-check rule spawns a new shell
for every non-reentrant function we know, to make it easier
to mention the function name in the error message, with the _r
appended.

Since the line with the offending function is already printed
and some of the functions on our list do not have a _r counterpart,
compile them into one big regex and use a more generic error message
to save time.

Commit 67f2b727 removed the path restrictions for rng backend,
along with the documentation of the restriction.

Restore the documentation for users still using older libvirt.

https://bugzilla.redhat.com/show_bug.cgi?id=1074464

This function is plenty of ifdefs providing implementations for
Linux, *BSD and OS-X. However, if we are being build for any
other architecture, all that's left behind by preprocessor is
just a error reporting call and return of -1. In that case,
passed arguments are unused:

../../src/util/virhostcpu.c: In function 'virHostCPUGetInfo':
../../src/util/virhostcpu.c:966:33: error: unused parameter 'cpus' [-Werror=unused-parameter]
                   unsigned int *cpus,
                                 ^~~~
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Explanation of S3 and S4 states was swapped.

Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

xl.cfg:
usbdev = [ "hostbus=1,hostaddr=3" ]

usb.xml:
  <hostdev mode='subsystem' type='usb' managed='no'>
    <source>
      <address bus='1' device='3'/>
    </source>
  </hostdev>
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Support hot attach/detach a USB host device to guest.
Currently libxl only supports xen PV guest, and only
supports specifying USB host device by 'bus number'
and 'device number', for example:

 usb.xml:
    <hostdev mode='subsystem' type='usb' managed='no'>
      <source>
        <address bus='1' device='3'/>
      </source>
    </hostdev>
 #xl attach-device dom usb.xml
 #xl detach-device dom usb.xml
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Support creating guest with USB host device in config file.
Currently libxl only supports xen PV guest, and only supports
specifying USB host device by 'bus number' and 'device number',
for example:

    <hostdev mode='subsystem' type='usb' managed='no'>
      <source>
        <address bus='1' device='3'/>
      </source>
    </hostdev>
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Refactor the error paths for attaching char device (it's about to be
more complicated).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a slight clarification to usage of "telnet", "telnets", or "tls" as
the protocol type value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add the capability flag and checks for the qemu object 'tls-creds-x509'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '42ff399a' broke syntax-check by not encasing <dt> elements
in <code>xxx</code>

I screwed up by accidentally pushing incomplete version of the
renumbering commit.  This patch just fixes the rest so the tree matches
changes in v2.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Version was bumped but documentation (and comments) didn't follow the
numbering.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If the domain is not running, but for example the CPUs are stopped, the
ACPI event gets queued and resume of the domain will just shut it off.

https://bugzilla.redhat.com/show_bug.cgi?id=1216281Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since obtaining a job can wait for another job to finish, the state
might change in the meantime.  And checking it more than once is
pointless.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This bumps the release number of 2.0.0, to reflect the switch to
a new time based release versioning scheme. The downloads page
is updated to describe our policies for release schedules and
release version numbering

The stable release docs are changed to reflect the fact that
the stable version numbers are now just 3 digits long instead
of 4.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively.  It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 11567cf6 introduced an include which will only work when
building with xen (particularly libxl).  However, that file is supposed
to be includable from anywhere (as with other testutils* files.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Building with clang 3.8 triggers the following error:

  CC       virt_host_validate-virt-host-validate-qemu.o
virt-host-validate-qemu.c:36:11: error: initializing 'char *' with an expression of type 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
    char *kvmhint = _("Check that CPU and firmware supports virtualization "
          ^         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virt-host-validate-qemu.c:46:17: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
        kvmhint = _("Check that the 'kvm-intel' or 'kvm-amd' modules are "
                ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.

Fix by using 'const' for kvmhint declaration.

Populate libxl_domain_build_info struct with bios and firmware
info from virDomainLoaderDef.

Note: Currently libxl only allows specifying the type of BIOS.
For type LIBXL_BIOS_TYPE_OVMF, the firmware path is configured
when building Xen using '--with-system-ovmf='. If not specified,
LIBXL_FIRMWARE_DIR/ovmf.bin is used. In the future, Xen will
support a user-specified firmware path. See

http://lists.xenproject.org/archives/html/xen-devel/2016-03/msg01628.html

Once that work is merged into xen.git, the libvirt libxl driver
will be able to honor a user-specified path. In the meantime use
the implicit path, which is tolerable since it is advertised in
domcapabilities.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support to xenconfig for conversion of xl.cfg(5) bios config
to/from libvirt domXml <loader> config. SeaBIOS is the default
for HVM guests using upstream QEMU. ROMBIOS is the default when
using the old qemu-dm. This patch allows specifying OVMF as an
alternate firmware.

Example xl.cfg:
  bios = "ovmf"

Example domXML:
  <os>
    ...
    <loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader>
  </os>

Note that currently Xen does not support a separate nvram for
non-volatile variables.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add domain capabilities for PV and HVM domains.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Move capabilities code out of libxl_conf.{ch} and into new
libxl_capabilities.{ch} files.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>