supersede tedious statements getting cpu bitmap
from parameter cpumap by virBitmapNewData function
Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>

The final patch in Hu Tao's series to enhance virBitmap actually
removes virDomainCpuSetParse and virDomainCpuSetFormat as "no longer
used", and the rest of the series hadn't taken care of two uses of
virDomainCpuSetParse in the xen code.

This patch replaces those with appropriate virBitmap functions. It
should be pushed prior to the patch removing virDomainCpuSetParse.

Including QEMU, LXC, UML, XEN drivers.

virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.

When the XenStore tdb lives persistently and is not cleared between host
reboots, Xend (version 3.4 and 4.1) re-creates the domain information
located in XenStore below /vm/$UUID. (According to the xen-3.2-commit
hg265950e3df69 to fix a problem when locally migrating a domain to the
host itself.)

When doing so a version number is added to the UUID separated by one
dash, which confuses xenStoreDomainIntroduced(): It iterates over all
domains and tries to lookup all inactive domains using
xenStoreDomainGetUUID(), which fails if the running domain is renamed:
virUUIDParse() fails to parse the versioned UUID and the domain is
flagged as missing. When this happens the function delays .2s and
re-tries 20 times again, multiplied by the number of renamed VMs.
  14:48:38.878: 4285: debug : xenStoreDomainIntroduced:1354 : Some domains were missing, trying again

This adds a significant delay:
  # time virsh list >/dev/null
  real    0m6.529s
  # xenstore-list /vm
  00000000-0000-0000-0000-000000000000
  00000000-0000-0000-0000-000000000000-1
  00000000-0000-0000-0000-000000000000-2
  00000000-0000-0000-0000-000000000000-3
  00000000-0000-0000-0000-000000000000-4
  00000000-0000-0000-0000-000000000000-5
  7c06121e-90c3-93d4-0126-50481d485cca
  00000000-0000-0000-0000-000000000000-6
  00000000-0000-0000-0000-000000000000-7
  144ad19d-dfb4-2f80-8045-09196bb8784f
  00000000-0000-0000-0000-000000000000-8
  144ad19d-dfb4-2f80-8045-09196bb8784f-1
  00000000-0000-0000-0000-000000000000-9
  00000000-0000-0000-0000-000000000000-10
  00000000-0000-0000-0000-000000000000-11
  00000000-0000-0000-0000-000000000000-12
  00000000-0000-0000-0000-000000000000-13
  00000000-0000-0000-0000-000000000000-14
  144ad19d-dfb4-2f80-8045-09196bb8784f-2
  00000000-0000-0000-0000-000000000000-15
  144ad19d-dfb4-2f80-8045-09196bb8784f-3
  00000000-0000-0000-0000-000000000000-16

The patch adds truncation of the UUID as read from the XenStore path
before passing it to virUUIDParse().

The same issue is reported at
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666135>
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

This converts the following public API datatypes to use the
virObject infrastructure:

  virConnectPtr
  virDomainPtr
  virDomainSnapshotPtr
  virInterfacePtr
  virNetworkPtr
  virNodeDevicePtr
  virNWFilterPtr
  virSecretPtr
  virStreamPtr
  virStorageVolPtr
  virStoragePoolPtr

The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.

* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
  public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/storage/storage_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
  tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
  to use virObjectUnref/virObjectRef
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is a follow up patch of commit f9ce7dad, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.

And deserts the outdated comments like:

 * libvirt-qemu.h:
 * Summary: qemu specific interfaces
 * Description: Provides the interfaces of the libvirt library to handle
 *              qemu specific methods
 *
 * Copy:  Copyright (C) 2010, 2012 Red Hat, Inc.

Uses the more compact style like:

 * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
 *
 * Copyright (C) 2010, 2012 Red Hat, Inc.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the legacy Xen drivers to use virReportError instead of
the statsError, virXenInotifyError, virXenStoreError,
virXendError, xenUnifiedError, xenXMError custom macros
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The xenHypervisorInit method was called from two different
locations, during initial driver registration and also while
opening a Xen connection. The former can't report any useful
errors to the end user/app, so remove it. To ensure thread
safety use a VIR_ONCE_GLOBAL_INIT call to invoke
xenHypervisorInit from the xenHypervisorOpen method.

As per the comment, the Xen hypervisor driver is considered to
be mandatory when running privileged. When it fails to open,
we should thus return an error, not ignore it.

The Xen driver had a number of error reports which passed a
constant string without format specifiers and was missing
"%s". Furthermore the errors were related to failing system
calls, but virReportSystemError was not used. So the only
useful piece of info (the errno) was being discarded

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

Coverity logs:

Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: alloc_fn: Calling allocation function "xenDaemonLookupByUUID".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: alloc_fn: Storage is returned from allocation function "virGetDomain".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:191: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:210: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: var_assign: Assigning: "ret" = "virGetDomain(conn, name, uuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2541: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: var_assign: Assigning: "dom" =  storage returned from "xenDaemonLookupByUUID(conn, rawuuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:126: leaked_storage: Variable "dom" going out of scope leaks the storage it points to.

Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: var_assign: Assigning: "cpuinfo" =  storage returned from "fopen("/proc/cpuinfo", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "cpuinfo" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:45: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "cpuinfo".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "cpuinfo" going out of scope leaks the storage it points to.

Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: var_assign: Assigning: "capabilities" =  storage returned from "fopen("/sys/hypervisor/properties/capabilities", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "capabilities" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:60: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "capabilities".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "capabilities" going out of scope leaks the storage it points to.

On newer xend (v3.x and after) there is no state and domid reported
for inactive domains. When initially creating connections this is
handled in various places by assigning domain->id = -1.
But once an instance has been running, the id is set to the current
domain id. And it does not change when the instance is shut down.
So when querying the domain info, the hypervisor driver, which gets
asked first will indicate it cannot find information, then the
xend driver is asked and will set the status to NOSTATE because it
checks for the -1 domain id.
Checking domain/status for 0 seems to be more reliable for that.

One note: I am not sure whether the domain->id also should get set
back to -1 whenever any sub-driver thinks the instance is no longer
running.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=746007
BugLink: http://bugs.launchpad.net/bugs/929626Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

The code is splattered with a mix of

  sizeof foo
  sizeof (foo)
  sizeof(foo)

Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:

List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$'

Found files were modified with this command:
sed -i -e                                                                 \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

Then checked for nonsense.

The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e                            \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

Move error reporting out of the callers, into virURIParse
and virURIFormat, to get consistency.

* include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI
* src/util/viruri.c, src/util/viruri.h: Add error reporting
* src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c, tests/viruritest.c: Remove error
  reporting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr

* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
  Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
  src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
  tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.

This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).

* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.

Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.

File changes:
 - src/util/viruri.h        -- declaration
 - src/util/viruri.c        -- definition
 - src/libvirt_private.syms -- symbol export
 - src/Makefile.am          -- added source and header files
 - cfg.mk                   -- added sc_prohibit_xmlURI
 - all others               -- ID name and include fixes

The auto-generated WWN comply with the new addressing schema of WWN:

<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>

We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.

filename is not initialized to NULL while it's unconditionally freed in
the error path.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

On CentOS5:
If "virsh edit $DOM" is used and an error happens (for example changing
any live cycle action to a non-existing value), libvirt forgets that
$DOM exists, since it is already removed from the internal hash tables,
which are used for domain lookup.
In once case (unreproducible) even the persistent configuration
/etc/xen/$DOM was deleted.

Instead of using the compound function xenXMConfigSaveFile() explicitly
use xenFomatXM() and virConfWriteFile() to distinguish between a failure
in converting the libvirt definition to the xen-xm format and a problem
when writing the file.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

On CentOS5 with xen-3.0.3:

 Program received signal SIGSEGV, Segmentation fault.
 virFree (ptrptr=0x8) at util/memory.c:310
 310         free(*(void**)ptrptr);
 (gdb) bt
 #0  virFree (ptrptr=0x8) at util/memory.c:310
 #1  0x00002aaaaae167c8 in xenXMDomainDefineXML (conn=0x694e80, xml=0x6b2ce0 "P\fk") at xen/xm_internal.c:1199
 #2  0x00002aaaaae070d7 in xenUnifiedDomainDefineXML (conn=0x8,
     xml=0x6ac040 "<domain type='xen'>\n  <name>pv</name>\n  <uuid>20291bc0-453a-4d6c-c6ac-4e5af63b932c</uuid>\n  <memory>1048576</memory>\n  <currentMemory>1048576</currentMemory>\n  <vcpu>1</vcpu>\n  <os>\n    <type arch='x8"...) at xen/xen_driver.c:1524
 #3  0x00002aaaaada7803 in virDomainDefineXML (conn=0x694e80,
     xml=0x6ac040 "<domain type='xen'>\n  <name>pv</name>\n  <uuid>20291bc0-453a-4d6c-c6ac-4e5af63b932c</uuid>\n  <memory>1048576</memory>\n  <currentMemory>1048576</currentMemory>\n  <vcpu>1</vcpu>\n  <os>\n    <type arch='x8"...) at libvirt.c:7823
 #4  0x0000000000426173 in cmdEdit (ctl=0x7fffffffb8e0, cmd=<value optimized out>) at virsh.c:14882
 #5  0x000000000041c9ce in vshCommandRun (ctl=0x7fffffffb8e0, cmd=0x658c50) at virsh.c:17712
 #6  0x000000000042c3b9 in main (argc=1, argv=<value optimized out>) at virsh.c:19317
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

libvirt supports 4 different versions of the user-land XenD daemon. When
queried the daemon just returns its generation number, which is hard to
match to the version of the Xen tools.

Replace the magic generation numbers by named enum definitions to
improve code readability.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Rename virFormatMacAddr, virGenerateMacAddr and virParseMacAddr
to virMacAddrFormat, virMacAddrGenerate and virMacAddrParse
respectively

In preparation for the patch to include Murmurhash3, which
introduces a virhashcode.h and virhashcode.c files, rename
the existing hash.h and hash.c to virhash.h and virhash.c
respectively.

Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers

by dereferencing a NULL pointer in the call to
virNodeSuspendGetTargetMask.

While we still don't want to enable gcc's new -Wformat-literal
warning, I found a rather easy case where the warning could be
reduced, by getting rid of obsolete error-reporting practices.
This is the last place where we were passing the (unused) net
and conn arguments for constructing an error.

* src/util/virterror_internal.h (virErrorMsg): Delete prototype.
(virReportError): Delete macro.
* src/util/virterror.c (virErrorMsg): Make static.
* src/libvirt_private.syms (virterror_internal.h): Drop export.
* src/util/conf.c (virConfError): Convert to macro.
(virConfErrorHelper): New function, and adjust error calls.
* src/xen/xen_hypervisor.c (virXenErrorFunc): Delete.
(xenHypervisorGetSchedulerType)
(xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters)
(xenHypervisorDomainBlockStats)
(xenHypervisorDomainInterfaceStats)
(xenHypervisorDomainGetOSType)
(xenHypervisorNodeGetCellsFreeMemory, xenHypervisorGetVcpus):
Update callers.

Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.

* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.

pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)

if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
    return -1;

..skipped...

if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
    goto reattachdevs;

NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667

This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:

  * Add the device to inactive list during nodedev-dettach
  * Remove the device from inactive list during nodedev-reattach
  * Remove the device from inactive list during attach-device
    (for non-managed device)
  * Add the device to inactive list after detach-device, only
    if the device is not managed

With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)

if (pciResetDevice(dev, driver->activePciHostdevs,
                   driver->inactivePciHostdevs) < 0)
    goto reattachdevs;

xen-unstable c/s 23874:651aed73b39c added another member to
xen_domctl_getdomaininfo struct and bumped domctl version to 8.
Add a corresponding domctl v8 struct in xen hypervisor sub-driver
and detect domctl v8 during initialization.

The console path in xenstore is /local/domain/<id>/console/tty
for PV guests (PV console) and /local/domain/<id>/serial/0/tty
(serial console) for HVM guests.  Similar to Xen's in-tree console
client, read the correct path for PV vs HVM.

The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.

If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.

The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.

The demo for the bug is to run

  while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done

prior to this fix, it will frequently hang and / or
crash, or corrupt memory