- 31 5月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Apart from the non-sanlock check build, there is also a little fix for qemu (EXTRA_DIST had qemu.conf and others inside even if the build was supposed to be without qemu).
-
- 30 5月, 2012 7 次提交
-
-
由 Wen Congyang 提交于
We generate *.aug from *.aug.in by augeas-gentest.pl, so this script should be included in dist file.
-
由 Eric Blake 提交于
Some of our rules used $(PERL), while others used 'perl'. Always using the variable allows a developer to point to a different (often better) perl than the default one found on $PATH. * daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL). * src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h) (PDWTAGS, %protocol.c, %_probes.stp): Likewise.
-
由 Eric Blake 提交于
Without this fix, a VPATH build (such as used by ./autobuild.sh) fails with messages like: make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon' ../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38. Since the test files are not part of the tarball, we can generate them into the build dir, but rather than create a subdirectory just for the test file, it is easier to test them directly in libvirt.git/src. * daemon/Makefile.am (AUG_GENTEST): Factor out definition. (test_libvirtd.aug): Look for correct file. * src/Makefile.am (AUG_GENTEST): Use $(PERL). (qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug) (locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories. (check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect location of built tests. * configure.ac (PERL): Substitute perl.
-
由 Martin Kletzander 提交于
I added libvirt_qemu_probes.h into BUILT_SOURCES. That makes it generated, but most probably it is not the clearest way how to do that, but it fixes the build.
-
由 Eric Blake 提交于
The previous patch fixed an incremental build, but missed that on a fresh checkout, we now have nothing left that stops make from nuking libvirt_qemu_probes.o. * src/Makefile.am ($(libvirt_driver_qemu_la_SOURCES)): Delete, since this variable is empty. (.PRECIOUS): Add %_probes.o, so they don't get nuked as an intermediate by-product after creating %_probes.lo.
-
由 Eric Blake 提交于
The moment you specify a _DEPENDENCIES, older automake (stupidly) assumes that you will specify _all_ dependencies for that target. This stupidity has been fixed in automake 1.12, but we cannot rely on newer automake everywhere. For libvirt_la_DEPENDENCIES, we took care of providing the full list, but for libvirt_qemu_la_DEPENDENCIES, we were missing the dependency on libvirt_qemu_impl.la, which resulted in a failed build: make[3]: Entering directory `/home/ajia/Workspace/libvirt/src' CCLD libvirt_driver_qemu.la libtool: link: `libvirt_qemu_probes.lo' is not a valid libtool object * src/Makefile.am (libvirt_driver_qemu_la_DEPENDENCIES): Delete; automake does a better job if it does the entire job.
-
由 Eric Blake 提交于
Otherwise, 'make rpm' fails with: make[2]: *** No rule to make target `locking/test_libvirt_sanlock.aug.in', needed by `distdir'. Stop. make[2]: Leaving directory `/home/dipankar/src/powerpc/libvirt-ppc/src' make[1]: *** [distdir] Error 1 Reported by Dipankar Sarma. * src/Makefile.am (CLEANFILES): Clean only the generated file.
-
- 28 5月, 2012 4 次提交
-
-
由 Eric Blake 提交于
Libtool is picky about linking against a module library (aka a .so); giving lots of warnings like this in the tests directory: CCLD networkxml2argvtest *** Warning: Linking the executable networkxml2argvtest against the loadable module *** libvirt_driver_network.so is not portable! Fix that by splitting things into a convenience library which can be used directly by the tests, and making the real .so just wrap the convenience library. Based on a suggestion by Daniel P. Berrange. * configure.ac (--with-driver-modules): Fix help test. * src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la) (libvirt_driver_qemu.la, libvirt_driver_lxc.la) (libvirt_driver_uml.la): Factor into new convenience libraries. * tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS) (networkxml2argvtest_LDADD): Link to convenience libraries, not shared libraries.
-
由 Daniel P. Berrange 提交于
There was no rule forcing libvirt_qemu_probes.o to be built before libvirt_qemu_probes.lo was used. Also libvirtd was still referencing the .o file, rather than the .lo file. Both the .lo and .o file must be listed as DEPENDENCIES, otherwise libtool will unhelpfully delete the .o file once the .lo file is created. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The CoTaskMemFree function requires the ole32 DLL to be linked against. Currently this is only done for the VirtualBox driver. Also add it to libvirt_util.la * configure.ac: Unconditionally add ole32 DLL to Win32 * src/Makefile.am: Link old32 to libvirt_util.la
-
由 Daniel P. Berrange 提交于
When adding new config file parameters, the corresponding additions to the augeas lens' are constantly forgotten. Also there are augeas test cases, these don't catch the error, since they too are never updated. To address this, the augeas test cases need to be auto-generated from the example config files. * build-aux/augeas-gentest.pl: Helper to generate an augeas test file, substituting in elements from the example config files * src/Makefile.am, daemon/Makefile.am: Switch to auto-generated augeas test cases * daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in, src/locking/test_libvirt_sanlock.aug, src/locking/test_libvirt_sanlock.aug.in, src/lxc/test_libvirtd_lxc.aug, src/lxc/test_libvirtd_lxc.aug.in, src/qemu/test_libvirtd_qemu.aug, src/qemu/test_libvirtd_qemu.aug.in: Remove example config file data, replacing with a ::CONFIG:: placeholder Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 26 5月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Libtool supports linking directly against .o files on some platforms (such as Linux), which happens to be the only place where we are actually doing that (for the dtrace-generated probes.o files). However, it raises a big stink about the non-portability, even though we don't attempt it on platforms where it would actually fail: CCLD libvirt_driver_qemu.la *** Warning: Linking the shared library libvirt_driver_qemu.la against the non-libtool *** objects libvirt_qemu_probes.o is not portable! This shuts libtool up by creating a proper .lo file that matches what libtool normally expects. * src/Makefile.am (%_probes.lo): New rule. (libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into... (%_probes.stp): ...shorter rule. (CLEANFILES): Clean new .lo files. (libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD) (libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file. * tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.
-
- 24 5月, 2012 5 次提交
-
-
由 Daniel P. Berrange 提交于
When building as driver modules, it is not possible for the QEMU driver module to reference the DTrace/SystemTAP probes linked into the main libvirt.so. Thus we need to move the QEMU probes into a separate file 'libvirt_qemu_probes.d'. Also rename the existing file from 'probes.d' to 'libvirt_probes.d' while we're at it * daemon/Makefile.am, src/internal.h: Include libvirt_probes.h instead of probes.h * src/Makefile.am: Add rules for libvirt_qemu_probes.d * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h * src/libvirt_probes.d: Rename from probes.d * src/libvirt_qemu_probes.d: QEMU specific probes formerly in probes.d Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Only libvirt_driver_storage.la links to libblkid currently. If we are running in a scenario with driver modules, LXC must directly link to it, since it can't assume the storage driver is present Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The libvirt_test.la library was introduced to allow test suites to reference internal-only symbols. These days, nearly every symbol we care about is in src/libvirt_private.syms, so there is no need for libvirt_test.la to continue to exist * src/Makefile.am: Delete libvirt_test.la & add new .syms files * src/libvirt_private.syms: Export symbols needed by test suite * tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link to network_driver.la * src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed by test suite
-
由 Daniel P. Berrange 提交于
libvirt_driver_nodedev.la should not link against either libvirt_util.la or gnulib.la, since libvirt.so brings in those deps. * src/Makefile.am: Fix broken linkage of libvirt_driver_nodedev.la Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The driver modules all use symbols which are defined in libvirt.so. Thus for loading of modules to work, the binary that libvirt.so is linked to must export its symbols back to modules. If the libvirt.so itself is dlopen()d then the RTLD_GLOBAL flag must be set. Unfortunately few, if any, programming languages use the RTLD_GLOBAL flag when loading modules :-( This means is it not practical to use driver modules for any libvirt client side drivers (OpenVZ, VMWare, Hyper-V, Remote client, test). This patch changes the build process so only server side drivers are built as modules (Xen, QEMU, LXC, UML) * daemon/libvirtd.c: Add missing load of 'interface' driver * src/Makefile.am: Only build server side drivers as modules * src/libvirt.c: Don't load any driver modules Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 22 5月, 2012 1 次提交
-
-
由 Wido den Hollander 提交于
This patch adds support for a new storage backend with RBD support. RBD is the RADOS Block Device and is part of the Ceph distributed storage system. It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only. To function this backend relies on librbd and librados being present on the local system. The backend also supports Cephx authentication for safe authentication with the Ceph cluster. For storing credentials it uses the built-in secret mechanism of libvirt. Signed-off-by: NWido den Hollander <wido@widodh.nl>
-
- 15 5月, 2012 1 次提交
-
-
由 Guido Günther 提交于
to save some syscalls (as suggested by Eric Blake)
-
- 04 5月, 2012 1 次提交
-
-
由 Serge Hallyn 提交于
configure.ac: check for libnl-3 in addition to libnl-1 src/Makefile.am: link against libnl when needed src/util/virnetlink.c: support libnl3 api. To minimize impact on code flow, wrap the differences under the virNetlink* namespace. Unfortunately libnl3 moves netlink/msg.h to /usr/include/libnl3/netlink/msg.h, so the LIBNL_CFLAGS need to be added to a bunch of places where they weren't needed with libnl1. Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 22 4月, 2012 1 次提交
-
-
由 Wen Congyang 提交于
commit 2223ea98 removes src/libvirt_dbus.syms, but it forgets to remove it from EXTRA_DIST. It will cause 'make dist' failed.
-
- 20 4月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
DBus connection. The HAL device code further requires that the DBus connection is integrated with the event loop and provides such glue logic itself. The forthcoming FirewallD integration also requires a dbus connection with event loop integration. Thus we need to pull the current event loop glue out of the HAL driver. Thus we create src/util/virdbus.{c,h} files. This contains just one method virDBusGetSystemBus() which obtains a handle to the single shared system bus instance, with event glue automagically setup.
-
- 23 3月, 2012 4 次提交
-
-
由 Daniel P. Berrange 提交于
* src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_AUTH error domain Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To follow latest naming conventions, rename src/util/authhelper.[ch] to src/util/virauth.[ch]. * src/util/authhelper.[ch]: Rename to src/util/virauth.[ch] * src/esx/esx_driver.c, src/hyperv/hyperv_driver.c, src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update for renamed include files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The '.ini' file format is a useful alternative to the existing config file style, when you need to have config files which are hashes of hashes. The 'virKeyFilePtr' object provides a way to parse these file types. * src/Makefile.am, src/util/virkeyfile.c, src/util/virkeyfile.h: Add .ini file parser * tests/Makefile.am, tests/virkeyfiletest.c: Test basic parsing capabilities Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Convert drivers currently using the qparams APIs, to instead use the virURIPtr query parameters directly. * src/esx/esx_util.c, src/hyperv/hyperv_util.c, src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove use of qparams * src/util/qparams.h, src/util/qparams.c: Delete * src/Makefile.am, src/libvirt_private.syms: Remove qparams Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 05 3月, 2012 1 次提交
-
-
由 Jiri Denemark 提交于
Building virt-aa-helper with dtrace probes enabled, ldd complained about undefined references: ./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24): undefined reference to `libvirt_event_poll_purge_timeout_semaphore' ...
-
- 27 2月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds a set of functions used in creating console streams for domains using PTYs and ensures mutually exclusive access to the PTYs. If mutually exclusive access is not used, two clients may open the same console, which results in corruption on both clients as both of them race to read data from the PTY. Two approaches are used to ensure this: 1) Internal data structure holding open PTYs. This is used internally and enables the user to forcibly terminate another console connection eg. when somebody leaves the console open on another host. 2) UUCP style lock files: This uses UUCP lock files according to the FHS ( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES ) to check if other programs (like minicom) are not using the pty device of the console. This feature is disabled by default and may be enabled using configure parameter --with-console-lock-files=/path/to/lock/file/directory or --with-console-lock-files=auto (which tries to infer the location from OS used (currently only linux). On usual linux systems, normal users may not write to the /var/lock directory containing the locks. This poses problems while in session mode. If the current user has no access to the lockfile directory, check for presence of the file is still done, but no lock file is created. This does NOT result in an error.
-
- 25 2月, 2012 2 次提交
-
-
由 Martin Kletzander 提交于
Function xmlParseURI does not remove square brackets around IPv6 address when parsing. One of the solutions is making wrappers around functions working with xmlURI*. This assures that uri->server will be always properly assigned and it doesn't have to be changed when used on some new place in the code. For this purpose, functions virParseURI and virSaveURI were added. These function are wrappers around xmlParseURI and xmlSaveUri respectively. Also there is one new syntax check function to prohibit these functions anywhere else. File changes: - src/util/viruri.h -- declaration - src/util/viruri.c -- definition - src/libvirt_private.syms -- symbol export - src/Makefile.am -- added source and header files - cfg.mk -- added sc_prohibit_xmlURI - all others -- ID name and include fixes
-
由 Daniel P. Berrange 提交于
The /usr/include/python/pyconfig.h file pollutes the global namespace with a huge number of HAVE_XXX and WITH_XXX defines. These change what we detected in our own config.h In particular if you try to build without DTrace, python's headers turn it back on with predictable fail. THe hack to workaround this is to rename WITH_DTRACE to WITH_DTRACE_PROBES to avoid the namespace clash
-
- 16 2月, 2012 1 次提交
-
-
由 Ansis Atteka 提交于
This patch allows libvirt to add interfaces to already existing Open vSwitch bridges. The following syntax in domain XML file can be used: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> or if libvirt should auto-generate the interfaceid use following syntax: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> It is also possible to pass an optional profileid. To do that use following syntax: <interface type='bridge'> <source bridge='ovsbr'/> <mac address='00:55:1a:65:a2:8d'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d' profileid='test-profile'/> </virtualport> </interface> To create Open vSwitch bridge install Open vSwitch and run the following command: ovs-vsctl add-br ovsbr
-
- 04 2月, 2012 2 次提交
-
-
由 D. Herrendoerfer 提交于
Rename the src/util/netlink files to src/util/virnetlink to better fit the naming scheme. Also rename nlComm to virNetlinkCommand. Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
-
由 Eric Blake 提交于
Our syntax checker missed all-lower-case variables (this will be fixed by the next .gnulib update). Additionally, anywhere that we mix in-tree files with generated files, automake recommends listing builddir prior to srcdir for VPATH builds. * src/Makefile.am (*_la_CFLAGS): Favor $(top_srcdir). (INCLUDES): Likewise, and follow automake recommendations on builddir before srcdir. * python/Makefile.am (INCLUDES): Swap directory order. * tests/Makefile.am (INCLUDES): Likewise. * tools/Makefile.am (INCLUDES): Likewise. * daemon/Makefile.am (INCLUDES): Likewise. (libvirtd.init, libvirtd.service): Favor $(). * examples/hellolibvirt/Makefile.am (hellolibvirt_LDADD): Likewise. * examples/openauth/Makefile.am (openauth_LDADD): Likewise. * examples/dominfo/Makefile.am (INCLUDES): Drop dead include. * examples/domsuspend/Makefile.am (INCLUDES): Likewise.
-
- 03 2月, 2012 2 次提交
-
-
由 Jiri Denemark 提交于
-
由 Daniel P. Berrange 提交于
For the sake of backwards compat, LXC guests are *not* confined by default. This is because it is not practical to dynamically relabel containers using large filesystem trees. Applications can create confined containers though, by giving suitable XML configs * src/Makefile.am: Link libvirt_lxc to security drivers * src/lxc/libvirtd_lxc.aug, src/lxc/lxc_conf.h, src/lxc/lxc_conf.c, src/lxc/lxc.conf, src/lxc/test_libvirtd_lxc.aug: Config file handling for security driver * src/lxc/lxc_driver.c: Wire up security driver functions * src/lxc/lxc_controller.c: Add a '--security' flag to specify which security driver to activate * src/lxc/lxc_container.c, src/lxc/lxc_container.h: Set the process label just before exec'ing init.
-
- 28 1月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Move the virMacAddrXXX functions out of util.[ch] and into a new dedicate file virmacaddr.[ch]
-
- 26 1月, 2012 3 次提交
-
-
由 Daniel P. Berrange 提交于
Recent discussions have illustrated the potential for DOS attacks with the hash table implementations used by most languages and libraries. https://lwn.net/Articles/474912/ libvirt has an internal hash table impl, and uses hash tables for a variety of purposes. The hash key generation code is pretty simple and thus not strongly collision resistant. This patch replaces the current libvirt hash key generator with the (public domain) Murmurhash3 code. In addition every hash table now gets a random seed value which is used to perturb the hashing code. This should make it impossible to mount any practical attack against libvirt hashing code. * bootstrap.conf: Import bitrotate module * src/Makefile.am: Add virhashcode.[ch] * src/util/util.c: Make virRandom() return a fixed 32 bit integer value. * src/util/hash.c, src/util/hash.h, src/util/cgroup.c: Replace hash code generation with a call to virHashCodeGen() * src/util/virhashcode.h, src/util/virhashcode.c: Add a new virHashCodeGen() API using the Murmurhash3 algorithm.
-
由 Daniel P. Berrange 提交于
In preparation for the patch to include Murmurhash3, which introduces a virhashcode.h and virhashcode.c files, rename the existing hash.h and hash.c to virhash.h and virhash.c respectively.
-
由 Daniel P. Berrange 提交于
The old virRandom() API was not generating good random numbers. Replace it with a new API virRandomBits which instead of being told the upper limit, gets told the number of bits of randomness required. * src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits, and move virRandomInitialize * src/util/util.h, src/util/util.c: Delete virRandom and virRandomInitialize * src/libvirt.c, src/security/security_selinux.c, src/test/test_driver.c, src/util/iohelper.c: Update for changes from virRandom to virRandomBits * src/storage/storage_backend_iscsi.c: Remove bogus call to virRandomInitialize & convert to virRandomBits
-