The IDE bus doesn't support readonly disks, so inform the user with an
error message instead of let qemu fail with a more obscure "Device
'ide-hd' could not be initialized" error message.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We have the following matrix of possible arguments handled by the logic
statement touched by this patch:
       | flags & _REUSE_EXT | !(flags & _REUSE_EXT)
-------+--------------------+----------------------
 format| (1)                | (2)
-------+--------------------+----------------------
!format| (3)                | (4)
-------+--------------------+----------------------

In cases 1 and 2 the user provided a format, in cases 3 and 4 not. The
user requests to use a pre-existing image in 1 and 3 and libvirt will
create a new image in 2 and 4.

The difference between cases 3 and 4 is that for 3 the format is probed
from the user-provided image, whereas in 4 we just use the existing disk
format.

The current code would treat cases 1,3 and 4 correctly but in case 2 the
format provided by the user would be ignored.

The particular piece of code was broken in commit 35c7701c
but since it was introduced a few commits before that it was never
released as working.

Advance the right pointer to actually append to the buffer. We were
lucky that all reads were completed in one try.

Libvirt didn't output feature flags for images stored on native gluster.
Fix this trivially by adding a feature formatter callback.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1095035

Since there is code using functions from the libxml library,
libvirt_conf should have that in LIBADD so it can be linked against
even without libvirt_util (which usually deals with the error itself,
since libvirt_util has libxml in LIBADD).  The same applies to
storage_backend.c.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In the test, the snapshot XML is written into a file that's located
under:

  abs_srcdir/vboxsnapshotxmldata/testResult.vbox

However, the abs_srcdir doesn't have to be necessarily writable. It
should have been abs_builddir instead. Moreover, the label in the func
creating the file is called 'fail' while it fulfils the duty of
'cleanup' label.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

At the very beginning of the test we check if the underlying
filesystem supports extended attributes as they are used to store fake
SELinux labels. In order to check that, a dummy file is created and
semi-random attribute is set. However, the file is created under:

  abs_srcdir "/securityselinuxlabeldata/testxattr"

which has two problems: abs_srcdir is not required to be writable, so
it should have been abs_builddir. The second one is - there's no
"securityselinuxlabeldata" folder under abs_builddir. The problem was
introduced in caf164f1.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virFileReadAll already logs an error. If reading the 'speed' file
fails with EINVAL, we log an error even though we ignore it. If it
fails with other errors, we log two errors.

Use virFileReadAllQuiet - ignore EINVAL and report just one error
in other cases.

Fixes this error on libvirtd startup:
2014-06-30 12:47:14.583+0000: 20971: error : virFileReadAll:1297 :
Failed to read file '/sys/class/net/wlan0/speed': Invalid argument

Just like virFileReadAll, but returns -errno instead
of reporting errors. Useful for ignoring some errors.

This stops the error message spam when running unprivileged
libvirtd:
2014-06-30 12:38:47.990+0000: 631: error : virPCIDeviceConfigOpen:300 :
Failed to open config space file
'/sys/bus/pci/devices/0000:00:00.0/config': Permission denied

Reported by Daniel Berrange:
https://www.redhat.com/archives/libvir-list/2014-June/msg01082.html

Remember if libvirtd is running as root or not.

Xen PV domains always have a PV console, so add one to the domain
config via post-parse callback if not explicitly specified in
the XML.  The legacy Xen driver behaves similarly, causing a
regression when switching to the new Xen toolstack.  I.e.

  virsh console pv-domain

will no longer work after upgrading a xm/xend stack to xl/libxl.

The commit caused prohibit_long_lines to fail in src/Makefile.am.

Noticed the following error when building the vbox driver
in the openSUSE build service

CCLD     vboxsnapshotxmltest
/usr/lib64/gcc/x86_64-suse-linux/4.8/../../../../x86_64-suse-linux/bin/ld:
../src/.libs/libvirt_driver_vbox_impl.a
(libvirt_driver_vbox_impl_la-vbox_snapshot_conf.o):
undefined reference to symbol 'xmlXPathRegisterNs@@LIBXML2_2.4.30'
/usr/lib64/libxml2.so: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status

Fixed by adding LIBXML_LIBS to libvirt_driver_vbox_impl_la_LIBADD

libxl interface for vcpu pinning is changing in Xen 4.5. Basically,
libxl_set_vcpuaffinity() now wants one more parameter. That is
representative of 'VCPU soft affinity', which libvirt does not use.

To mark such change, the macro LIBXL_HAVE_VCPUINFO_SOFT_AFFINITY is
defined. Use it as a gate and, if present, re-#define the calls from
the old to the new interface, to avoid breaking the build.
Signed-off-by: NDario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>

Throwing an error is much friendly than just
"error: An error occurred, but the cause is unknown"
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Commit 55bbb011 introduced a regression
where we forgot to save the persistent domain configuration after an
external snapshot. This would make libvirt forget the snapshots and
effectively revert to the previous state in the following scenario:

1) Start VM
2) Take snapshot
3) Destroy VM
4) Restart libvirtd

Also fix spurious blank line added by patch mentioned above.

Commit 80d0918b introduced a typo in variable name:

s/failIncomaptible/failIncompatible/

Pushed under the build breaker rule.

Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.

libvirt unit test used setxattr with "user.libvirt.selinux" name to
emulate setfilecon of selinux. But for some old kernel filesystem
(like 2.6.32-431.el6.x86_64), if the filesystem is not mounted with
user_xattr flag, the setxattr with "user.libvirt.selinux" will fail.

So adding testUserXattrEnabled() in securityselinuxlabeltest.c,
if user_xattr is not enabled, skip this case.

The user_xattr is departed in newer kernel, therefore this commit is
only for the compatablity for old kernel.
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Tested-by: NScott Sullivan <ssullivan@liquidweb.com>

We publish libvirt-api.xml for others to use, and in fact, the
libvirt-python bindings use it to generate python constants that
correspond to our enum values.  However, we had an off-by-one bug
that any enum that relied on C's rules for implicit initialization
of the first enum member to 0 got listed in the xml as having a
value of 1 (and all later members of the enum were equally
botched).

The fix is simple - since we add one to the previous value when
encountering an enum without an initializer, the previous value
must start at -1 so that the first enum member is assigned 0.

The python generator code has had the off-by-one ever since DV
first wrote it years ago, but most of our public enums were immune
because they had an explicit = 0 initializer.  The only affected
enums are:
- virDomainEventGraphicsAddressType (such as
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4), since commit 987e31ed
(libvirt v0.8.0)
- virDomainCoreDumpFormat (such as VIR_DOMAIN_CORE_DUMP_FORMAT_RAW),
since commit 9fbaff00 (libvirt v1.2.3)
- virIPAddrType (such as VIR_IP_ADDR_TYPE_IPV4), since commit
03e0e79e (not yet released)

Thanks to Nehal J Wani for reporting the problem on IRC, and
for helping me zero in on the culprit function.

* docs/apibuild.py (CParser.parseEnumBlock): Fix implicit enum
values.
Signed-off-by: NEric Blake <eblake@redhat.com>

libxl does not support save, restore, or migrate on all architectures,
notably ARM.  Detect whether libxl supports these operations using
LIBXL_HAVE_NO_SUSPEND_RESUME.  If not supported, drop advertisement of
<migration_features>.

Found by Ian Campbell while improving Xen's OSSTEST infrastructure

http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html

Since commit d86c876a we are using
guestfwd=tcp:IP:PORT,chardev=ID for guestfwd specification, however,
that has not changed in qemu, so guestfwd does not work since.

Apart from that, guestfwd is not working with older qemu that doesn't
have QEMU_CAPS_DEVICE.

Both regressions exist since late 2009 and nobody found that (until
now), so I'm only fixing the first one.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1112066Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Allow people to build external bindings using the 'run' script
by defining the PKG_CONFIG_PATH var in it. eg to build Python
you could do

   ../libvirt/run python setup.py build
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The QEMU VNC client arg code has a long standing typo
of SASL_CONF_DIR when it should be SASL_CONF_PATH for
the env variable name.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.

The function headers contain type on the same line as the name. When
combined with usage of ATTRIBUTE_UNUSED, the function headers were very
long. Shorten them by breaking the line after the type.

Some of the functions in the storage driver had their headers formatted
incorrectly.

virSecurityManagerSetDiskLabel and virSecurityManagerRestoreDiskLabel
don't have complementary semantics. Document the semantics to avoid
possible problems.

I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.

Rename them to comply with the naming policy.

As pointed by Yuri Chornoivan in transifex:
https://fedora.transifex.com/projects/p/libvirt/translate/#uk/strings/27026506

The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>