* docs/schemas/domaincommon.rng: Add missing lxc & openvz
  console target types. Allow arch on LXC <os> type element
* tests/domainschematest: Include tests/lxcxml2xmldata/

Pass argv to the init binary of LXC, using a new <initarg> element.

* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
  tests/lxcxml2xmltest.c, tests/testutilslxc.c,
  tests/testutilslxc.h: Test parsing/formatting of LXC related
  XML parts

The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.

* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
  by configure.ac

When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.

I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.

Found when attempting to build on Fedora 17 alpha with:

   ./autogen.sh --system --enable-compile-warnings=error

(this same build command works without problem on Fedora 16). Since
the consumer of the qemuProcessReconnectData doesn't assume that the
other fields of the struct are initialized (although it uses them
internally), the simpler solution is to just switch to C99-style
struct initialization (which doesn't require specification of all
fields).

Found when attempting to build on Fedora 17 alpha with:

   ./autogen.sh --system --enable-compile-warnings=error

(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.

libvirt always adds -Werror-frame-larger-than=4096 to the flags when
it builds. When building on Fedora 17, two functions with multiple
1024 buffers declared inside if {} blocks would generate frame size
errors; apparently the version of gcc on Fedora 16 will merge these
multiple buffers into a single buffer even when optimization is off,
but Fedora 17 won't.

The fix is to declare a single 1024 buffer at the top of the two
offending functions, and reuse the single buffer throughout the
functions.

After cleanup introduced with previous commit, there is a need for
syntax-check rule taking care of return(). Regexp used in 'prohibit'
parameter is taken from the cleanup commit and modified so it fits
'grep -E' format. Semicolon at the end is needed, otherwise the regexp
could match return with cast.

Exception is created for python source files because we don't have any
documentation restricting the use of return that matches this case.

Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:

List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$'

Found files were modified with this command:
sed -i -e                                                                 \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

Then checked for nonsense.

The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e                            \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

When qparams support was dropped in commit bc1ff160, we forgot
to add tests to ensure that viruri can do the same round trip
handling of a URI. This round trip was broken, due to use
of the old 'query' field of xmlUriPtr, instead of the new
'query_raw'

Also, we forgot to report an OOM error.

* tests/viruritest.c (mymain): Add tests based on just-deleted
qparamtest.
(testURIParse): Allow difference in input and expected output.
* src/util/viruri.c (virURIFormat): Add missing error. Use
  query_raw, instead of query for xmlUriPtr object.

numad is available since Fedora 17 and RHEL6.X. And it's not supported
on s390[x] and ARM.

The oVirt developers have stated that the real reasons they want
to have qemu reuse existing volumes when creating a snapshot are:
1. the management framework is set up so that creation has to be
done from a central node for proper resource tracking, and having
libvirt and/or qemu create things violates the framework, and
2. qemu defaults to creating snapshots with an absolute path to
the backing file, but oVirt wants to manage a backing chain that
uses just relative names, to allow for easier migration of a chain
across storage locations.

When 0.9.10 added VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT (commit
4e9953a4), it only addressed point 1, but libvirt was still using
O_TRUNC which violates point 2.  Meanwhile, the new qemu
'transaction' monitor command includes a new optional mode argument
that will force qemu to reuse the metadata of the file it just
opened (with the burden on the caller to have valid metadata there
in the first place).  So, this tweaks the meaning of the flag to
cover both points as intended for use by oVirt.  It is not strictly
backward-compatible to 0.9.10 behavior, but it can be argued that
the O_TRUNC of 0.9.10 was a bug.

Note that this flag is all-or-nothing, and only selects between
'existing' and the default 'absolute-paths'.  A more flexible
approach that would allow per-disk selections, as well as adding
support for the 'no-backing-file' mode, would be possible by
extending the <domainsnapshot> xml to have a per-disk mode, but
until we have a management application expressing a need for that
additional complexity, it is not worth doing.

* src/libvirt.c (virDomainSnapshotCreateXML): Tweak documentation.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): Add
parameters.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Pass them
through.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot): Use
new monitor command arguments.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Adjust callers.
(qemuDomainSnapshotDiskPrepare): Allow qed, modify rules on reuse.

The hardest part about adding transactions is not using the new
monitor command, but undoing the partial changes we made prior
to a failed transaction.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
transaction when available.
(qemuDomainSnapshotUndoSingleDiskActive): New function.
(qemuDomainSnapshotCreateSingleDiskActive): Pass through actions.
(qemuDomainSnapshotCreateXML): Adjust caller.

QEmu 1.1 is adding a 'transaction' command to the JSON monitor.
Each element of a transaction corresponds to a top-level command,
with the additional guarantee that the transaction flushes all
pending I/O, then guarantees that all actions will be successful
as a group or that failure will roll back the state to what it
was before the monitor command.  The difference between a
top-level command:

{ "execute": "blockdev-snapshot-sync", "arguments":
  { "device": "virtio0", ... } }

and a transaction:

{ "execute": "transaction", "arguments":
  { "actions": [
    { "type": "blockdev-snapshot-sync", "data":
      { "device": "virtio0", ... } } ] } }

is just a couple of changed key names and nesting the shorter
command inside a JSON array to the longer command.  This patch
just adds the framework; the next patch will actually use a
transaction.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommand): Move
guts...
(qemuMonitorJSONMakeCommandRaw): ...into new helper.  Add support
for array element.
(qemuMonitorJSONTransaction): New command.
(qemuMonitorJSONDiskSnapshot): Support use in a transaction.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot): Add
argument.
(qemuMonitorJSONTransaction): New declaration.
* src/qemu/qemu_monitor.h (qemuMonitorTransaction): Likewise.
(qemuMonitorDiskSnapshot): Add argument.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction): New wrapper.
(qemuMonitorDiskSnapshot): Pass argument on.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Update caller.

Taking an external snapshot of just one disk is atomic, without having
to pause and resume the VM.  This also paves the way for later patches
to interact with the new qemu 'transaction' monitor command.

The various scenarios when requesting atomic are:
online, 1 disk, old qemu - safe, allowed by this patch
online, more than 1 disk, old qemu - failure, this patch
offline snapshot - safe, once a future patch implements offline disk snapshot
online, 1 or more disks, new qemu - safe, once future patch uses transaction

Taking an online system checkpoint snapshot is atomic, since it is
done via a single 'savevm' monitor command.  Taking an offline system
checkpoint snapshot is atomic, thanks to the previous patch.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag for single-disk setups.
(qemuDomainSnapshotDiskPrepare): Check for atomic here.
(qemuDomainSnapshotCreateDiskActive): Skip pausing the VM when
atomic supported.
(qemuDomainSnapshotIsAllowed): Use bool instead of int.

Offline internal snapshots can be rolled back with just a little
bit of refactoring, meaning that we are now automatically atomic.

* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Move
guts...
(qemuDomainSnapshotForEachQcow2Raw): ...to new helper, to allow
rollbacks.

Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.

This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group.  If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.

There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure.  However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.

We need a capability bit to gracefully error out if some of the
additions in future patches can't be implemented by the running qemu.

* src/qemu/qemu_capabilities.h (QEMU_CAPS_TRANSACTION): New cap.
* src/qemu/qemu_capabilities.c (qemuCaps): Name it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
it.

Otherwise, 'make check' breaks since commit bc1ff160 deleted
qparams.h.  A later patch will ensure that viruri takes over
what qparams used to do.

* tests/qparamtest.c (mymain): Delete, now that we have viruri.
* tests/Makefile.am (check_PROGRAMS, TESTS, qparamtest_SOURCES):
Delete old test.
* .gitignore: Add recent test additions.

Recent changes have caused build failures on systems where pdwtags works:
commit a26a1969 mistakenly exported a public variable
commits a26a1969, 57ddcc23, 487c0633 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags

* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.

On Fedora16 or above, qemu is supported now. So it is added
in rpm packaging.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.

While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.

This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.

This patch introduces a new event type for the QMP event
SUSPEND:

    VIR_DOMAIN_EVENT_ID_PMSUSPEND

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
                                        virDomainPtr dom,
                                        int reason,
                                        void *opaque);

"reason" is unused currently, always passes "0".

This patch introduces a new event type for the QMP event
WAKEUP:

    VIR_DOMAIN_EVENT_ID_PMWAKEUP

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
                                       virDomainPtr dom,
                                       int reason,
                                       void *opaque);

"reason" is unused currently, always passes "0".

With this patch, libvirt won't start the guest with the medium
source which already ejected by guest when doing migration, or
saving/restoring.

This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.

New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.

The "tray" is only allowed for removable disks, i.e. CDROM and
Floppy disks.

Example XML:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/tmp/cdrom.img'/>
      <target dev='hdd' bus='ide' tray='open'/>
    </disk>

This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):

    VIR_DOMAIN_EVENT_ID_TRAY_CHANGE

The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:

enum {
    VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
    VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,

\#ifdef VIR_ENUM_SENTINELS
    VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;

typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
                                           virDomainPtr dom,
                                           const char *devAlias,
                                           int reason,
                                           void *opaque);

Libvirt on x86 parses 'dmidecode' to gather characteristics of host
system. On PowerPC, this is now implemented by reading /proc/cpuinfo
NOTE: memory-DIMM information is not presently implemented.
Acked-by: NDaniel Veillard <veillard@redhat.com>
Acked-by: NDaniel P Berrange <berrange@redhat.com>
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

SASL may prompt for credentials after either a 'start' or 'step'
invocation. In both cases the code to handle this is the same.
Refactor this code into a separate method to reduce the duplication,
since the complexity is about to grow

* src/remote/remote_driver.c: Refactor interaction with SASL
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUTH error domain
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the functions in virauth.h have names matching the file
prefix, by renaming  virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>