1. 17 4月, 2015 1 次提交
    • J
      xenconfig: move <os> parsing/formating to config-specific files · 717a9251
      Jim Fehlig 提交于
      xl and xm differ a bit in how <os> configuration is represented.
      E.g. xl config supports <os><nvram .../></os> via its "bios"
      setting.
      
      Move the xenParseOS and xenFormatOS functions from xen_common.c
      and copy to xen_xl.c and xen_xm.c so they can be customized for
      xm vs xl config.  An unfortunate fallout is reordering of entries
      in the test config files.
      717a9251
  2. 14 3月, 2015 1 次提交
  3. 05 1月, 2015 1 次提交
    • C
      Add tests to xmconfigtest · 262d913f
      Chunyan Liu 提交于
      Add tests to testing HVM default features (pae, acpi, apic)
      conversion from xm config to libvirt xml. If no pae|acpi|apic
      specified in xm config, after conversion, libvirt xml should
      by default include:
       <features>
         <pae/>
         <apic/>
         <acpi/>
       </features>
      Signed-off-by: NChunyan Liu <cyliu@suse.com>
      262d913f
  4. 10 9月, 2014 1 次提交
    • M
      conf: Extend <loader/> and introduce <nvram/> · 68bf13db
      Michal Privoznik 提交于
      Up to now, users can configure BIOS via the <loader/> element. With
      the upcoming implementation of UEFI this is not enough as BIOS and
      UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
      is programmable flash (although all writes to code section are
      denied). Therefore we need new attribute @type which will
      differentiate the two. Then, new attribute @readonly is introduced to
      reflect the fact that some images are RO.
      
      Moreover, the OVMF (which is going to be used mostly), works in two
      modes:
      1) Code and UEFI variable store is mixed in one file.
      2) Code and UEFI variable store is separated in two files
      
      The latter has advantage of updating the UEFI code without losing the
      configuration. However, in order to represent the latter case we need
      yet another XML element: <nvram/>. Currently, it has no additional
      attributes, it's just a bare element containing path to the variable
      store file.
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      Acked-by: NLaszlo Ersek <lersek@redhat.com>
      Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      68bf13db
  5. 19 8月, 2014 1 次提交
  6. 19 2月, 2014 1 次提交
  7. 09 5月, 2012 1 次提交
    • O
      numad: Always output 'placement' of <vcpu> · d70f2e11
      Osier Yang 提交于
      <vcpu> is not an optional node. The value for its 'placement'
      actually always defaults to 'static' in the underlying codes.
      (Even no 'cpuset' and 'placement' is specified, the domain
      process will be pinned to all the available pCPUs).
      d70f2e11
  8. 02 4月, 2012 1 次提交
    • P
      Xen: Fix <clock> handling · 11ec6bd8
      Philipp Hahn 提交于
      XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
      (hgd24f37b31030 from 2007-04-03), which tracks the offset between the
      hypervisors clock and the domains RTC, and is persisted by XenD.
      In combination with localtime=1 this had a bug until XenD-3.4
      (hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
      manifests, but at least for me in TZ=Europe/Berlin I see the previous
      offset relative to utc being applied to localtime again, which manifests
      in an extra hour being added)
      
      XenD implements the following variants for clock/@offset:
      - PV domains don't have a RTC → 'localtime' | 'utc'
      - <3.1: no managed domains → 'localtime' | 'utc'
      - ≥3.1: the offset is tracked for HV → 'variable'
              due to the localtime=1 bug → 'localtime' | 'utc'
      - ≥3.4: the offset is tracked for HV → 'variable'
      
      Current libvirtd still thinks XenD only implements <clock offset='utc'/>
      and <clock offset='localtime'/>, which is wrong, since the semantic of
      'utc' and 'localtime' specifies, that the offset will be reset on
      domain-restart, while with 'variable' the offset is kept. (keeping the
      offset over "virsh edit" is important, since otherwise the clock might
      jump, which confuses certain guest OSs)
      
      xendConfigVersion was last incremented to 4 by the xen-folks for
      xen-3.1.0. I know of no way to reliably detect the version of XenD
      (user space tools), which may be different from the version of the
      hypervisor (kernel) version! Because of this only the change from
      'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
      behaviour of XenD-3.1 until XenD-3.4.
      
      For backward compatibility with previous versions of libvirt Xen-HV
      still accepts 'utc' and 'localtime', but they are returned as 'variable'
      on the next read-back from Xend to libvirt, since this is what XenD
      implements: The RTC is NOT reset back to the specified time on next
      restart, but the previous offset is kept.
      This behaviour can be turned off by adding the additional attribute
      adjustment='reset', in which case libvirt will report an error instead
      of doing the conversion. The attribute can also be used as a shortcut to
      offset='variable' with basis='...'.
      
      With these changes, it is also necessary to adjust the xen tests:
      
      "localtime = 0" is always inserted, because otherwise on updates the
      value is not changed within XenD.
      
      adjustment='reset' is inserted for all cases, since they're all <
      XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
      rtc_timeoffset.
      
      Some statements change their order because code was moved around.
      Signed-off-by: NPhilipp Hahn <hahn@univention.de>
      11ec6bd8
  9. 08 3月, 2012 1 次提交
    • E
      xml: output memory unit for clarity · 26545784
      Eric Blake 提交于
      Make it obvious to 'dumpxml' readers what unit we are using,
      since our default of KiB for memory (1024) differs from qemu's
      default of MiB; and differs from our use of bytes for storage.
      
      Tests were updated via:
      
      $ find tests/*data tests/*out -name '*.xml' | \
        xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
      $ find tests/*data tests/*out -name '*.xml' | \
        xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
      
      followed by a few fixes for the stragglers.
      
      Note that with this patch, the RNG for <memory> still forbids
      validation of anything except unit='KiB', since the code silently
      ignores the attribute; a later patch will expand <memory> to allow
      scaled input in the code and update the RNG to match.
      
      * docs/schemas/basictypes.rng (unit): Add 'bytes'.
      (scaledInteger): New define.
      * docs/schemas/storagevol.rng (sizing): Use it.
      * docs/schemas/storagepool.rng (sizing): Likewise.
      * docs/schemas/domaincommon.rng (memoryKBElement): New define; use
      for memory elements.
      * src/conf/storage_conf.c (virStoragePoolDefFormat)
      (virStorageVolDefFormat): Likewise.
      * src/conf/domain_conf.h (_virDomainDef): Document unit used
      internally.
      * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
      Likewise.
      * tests/*data/*.xml: Update all tests.
      * tests/*out/*.xml: Likewise.
      * tests/define-dev-segfault: Likewise.
      * tests/openvzutilstest.c (testReadNetworkConf): Likewise.
      * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
      26545784
  10. 29 7月, 2011 1 次提交
    • L
      conf: add <listen> subelement to domain <graphics> element · ef79fb5b
      Laine Stump 提交于
      Once it's plugged in, the <listen> element will be an optional
      replacement for the "listen" attribute that graphics elements already
      have. If the <listen> element is type='address', it will have an
      attribute called 'address' which will contain an IP address or dns
      name that the guest's display server should listen on. If, however,
      type='network', the <listen> element should have an attribute called
      'network' that will be set to the name of a network configuration to
      get the IP address from.
      
      * docs/schemas/domain.rng: updated to allow the <listen> element
      
      * docs/formatdomain.html.in: document the <listen> element and its
        attributes.
      
      * src/conf/domain_conf.[hc]:
      
        1) The domain parser, formatter, and data structure are modified to
           support 0 or more <listen> subelements to each <graphics>
           element. The old style "legacy" listen attribute is also still
           accepted, and will be stored internally just as if it were a
           separate <listen> element. On output (i.e. format), the address
           attribute of the first <listen> element of type 'address' will be
           duplicated in the legacy "listen" attribute of the <graphic>
           element.
      
        2) The "listenAddr" attribute has been removed from the unions in
           virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
           This attribute is now in the <listen> subelement (aka
           virDomainGraphicsListenDef)
      
        3) Helper functions were written to provide simple access
           (both Get and Set) to the listen elements and their attributes.
      
      * src/libvirt_private.syms: export the listen helper functions
      
      * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
        src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
        src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
      
        Modify all these files to use the listen helper functions rather
        than directly referencing the (now missing) listenAddr
        attribute. There can be multiple <listen> elements to a single
        <graphics>, but the drivers all currently only support one, so all
        replacements of direct access with a helper function indicate index
        "0".
      
      * tests/* - only 3 of these are new files added explicitly to test the
        new <listen> element. All the others have been modified to reflect
        the fact that any legacy "listen" attributes passed in to the domain
        parse will be saved in a <listen> element (i.e. one of the
        virDomainGraphicsListenDefs), and during the domain format function,
        both the <listen> element as well as the legacy attributes will be
        output.
      ef79fb5b
  11. 02 6月, 2011 1 次提交
    • J
      Fix order of disks and controllers · c1a98d88
      Jiri Denemark 提交于
      Commit 2d6adabd replaced qsorting disk
      and controller devices with inserting them at the right position. That
      was to fix unnecessary reordering of devices. However, when parsing
      domain XML devices are just taken in the order in which they appear in
      the XML since. Use the correct insertion algorithm to honor device
      target.
      c1a98d88
  12. 11 5月, 2011 1 次提交
    • P
      xen: parse and generate hpet item in sxpr · e547e44c
      Paolo Bonzini 提交于
      Recent versions of Xen disable the virtual HPET by default.  This is
      usually more precise because tick policies are not implemented for
      the HPET in Xen.  However, there may be several reasons to control
      the HPET manually: 1) to test the emulation; 2) because distros may
      provide the knob while leaving the default to "enabled" for compatibility
      reasons.
      
      This patch provides support for the hpet item in both sexpr and xm
      formats, and translates it to a <timer> element.
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      e547e44c
  13. 26 2月, 2011 1 次提交
    • M
      Add support for multiple serial ports into the Xen driver · 3ee7cf6c
      Michal Novotny 提交于
      this is the patch to add support for multiple serial ports to the
      libvirt Xen driver. It support both old style (serial = "pty") and
      new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
      tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.
      
      Written and tested on RHEL-5 Xen dom0 and working as designed but
      the Xen version have to have patch for RHBZ #614004 but this patch
      is for upstream version of libvirt.
      
      Also, this patch is addressing issue described in RHBZ #670789.
      Signed-off-by: NMichal Novotny <minovotn@redhat.com>
      3ee7cf6c
  14. 18 12月, 2010 1 次提交
    • E
      maint: improve tests distribution · 65532f45
      Eric Blake 提交于
      * tests/Makefile.am (EXTRA_DIST): Sort, and add directories.
      (SUBDIRS): Drop automake recursion into subdirs.
      * tests/commanddata/Makefile.am: Delete.
      * tests/confdata/Makefile.am: Likewise.
      * tests/sexpr2xmldata/Makefile.am: Likewise.
      * tests/xencapsdata/Makefile.am: Likewise.
      * tests/xmconfigdata/Makefile.am: Likewise.
      * tests/xml2sexprdata/Makefile.am: Likewise.
      65532f45
  15. 23 11月, 2010 1 次提交
  16. 20 10月, 2010 2 次提交
    • J
      Fix make check on RHEL-5 · f05b0e46
      Jiri Denemark 提交于
      The test for <vcpu> element is unrelated to vnc so the easiest fix is to
      remove related configuration.
      f05b0e46
    • E
      vcpu: improve vcpu support in xen command line · 0fab10e5
      Eric Blake 提交于
      This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
      (xend_internal), but leaves out changes for xenapi drivers.
      
      See this link for more details about vcpu_avail for xm usage.
      http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
      
      This relies on the fact that def->maxvcpus can be at most 32 with xen.
      
      * src/xen/xend_internal.c (xenDaemonParseSxpr)
      (sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
      when current vcpus is less than maximum.
      * src/xen/xm_internal.c (xenXMDomainConfigParse)
      (xenXMDomainConfigFormat): Likewise.
      * tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
      * tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
      * tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
      * tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
      * tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
      * tests/xml2sexprtest.c (mymain): New test.
      * tests/sexpr2xmltest.c (mymain): Likewise.
      * tests/xmconfigtest.c (mymain): Likewise.
      0fab10e5
  17. 24 8月, 2010 1 次提交
    • J
      xen tests: Fix missing "type ioemu" with rhel5-api · 20311a9a
      Jiri Denemark 提交于
      The most common cause of errors with rhel5-api turn on was missing
      "(type ioemu)" in sexpr or its equivalent in XM configuration file. This
      happens because the presence of that part in sexpr (or cfg) depends on
      xen version the host is running. Let's avoid it by explicitly specifying
      interface model which ensures "type ioemu" will always be emitted.
      
      This patch adds
      
          <model type='e1000'/>
      
      withing the interface element in all affected xml files. And
      
          (model 'e1000')
      
      to all corresponding sexpr files with similar fix to cfg files. Such
      configuration works regardless on Xen version.
      20311a9a
  18. 10 8月, 2010 1 次提交
    • P
      bootloader_args is named bootargs in xen-xm · ab8b2bea
      Philipp Hahn 提交于
      According to <xen-3.4.3/tools/python/xen/xm/create.py:158>
      	gopts.var('bootargs', val='NAME',
      			  fn=set_value, default=None,
      			  use="Arguments to pass to boot loader")
      the "bootloader_args" parameter needs to be translated into "bootargs"
      when using "virsh domxml-to-native xen-xm".
      The reverse direction (domxml-from-native) is already okay.
      
      This patch fixes domxml-to-native and adds two test files to catch this
      problem.
      Signed-off-by: NPhilipp Hahn <hahn@univention.de>
      ab8b2bea
  19. 29 7月, 2010 1 次提交
    • C
      domain conf: Track <console> target type · 6b247552
      Cole Robinson 提交于
      All <console> devices now export a <target> type attribute. QEMU defaults
      to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
      depending on fullvirt. Understandably there is lots of test fallout.
      
      This will be used to differentiate between a serial vs. virtio console for
      QEMU.
      Signed-off-by: NCole Robinson <crobinso@redhat.com>
      6b247552
  20. 15 6月, 2010 1 次提交
    • E
      maint: simplify some ignore files · fb8552f8
      Eric Blake 提交于
      * .hgignore: Delete, no longer used.
      * examples/python/.gitignore: Delete, covered globally.
      * include/.gitignore: Likewise.
      * python/tests/.gitignore: Likewise.
      * docs/schemas/.gitignore: Likewise.
      * tests/xml2sexprdata/.gitignore: Likewise.
      * tests/sexpr2xmldata/.gitignore: Likewise.
      * tests/confdata/.gitignore: Likewise.
      * tests/xencapsdata/.gitignore: Likewise.
      * tests/xmconfigdata/.gitignore: Likewise.
      * tests/xml2sexprdata/.gitignore: Likewise.
      fb8552f8
  21. 28 5月, 2010 1 次提交
  22. 25 2月, 2010 1 次提交
    • J
      build: avoid non-srcdir "make distcheck" failures (srcdir vs wildcard) · 083b901e
      Jim Meyering 提交于
      * tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
      * tests/xmconfigdata/Makefile.am: Likewise.
      * tests/xml2sexprdata/Makefile.am: Likewise.
      * tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
      * Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.
      083b901e
  23. 05 12月, 2009 1 次提交
  24. 08 7月, 2009 1 次提交
  25. 24 4月, 2009 1 次提交
  26. 03 4月, 2009 1 次提交
  27. 01 4月, 2009 1 次提交
  28. 28 11月, 2008 1 次提交
  29. 17 10月, 2008 1 次提交
    • J
      generate .gitignore files from .cvsignore ones · 164fbbd6
      Jim Meyering 提交于
      * Makefile.maint (sync-vcs-ignore-files): New target.
      Prompted by a patch from James Morris.
      http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
      Add all (now-generated) .gitignore files.
      * .gitignore: New file.
      * build-aux/.gitignore: New file.
      * docs/.gitignore: New file.
      * docs/devhelp/.gitignore: New file.
      * docs/examples/.gitignore: New file.
      * docs/examples/python/.gitignore: New file.
      * gnulib/lib/.gitignore: New file.
      * gnulib/lib/arpa/.gitignore: New file.
      * gnulib/lib/netinet/.gitignore: New file.
      * gnulib/lib/sys/.gitignore: New file.
      * gnulib/tests/.gitignore: New file.
      * include/.gitignore: New file.
      * include/libvirt/.gitignore: New file.
      * po/.gitignore: New file.
      * proxy/.gitignore: New file.
      * python/.gitignore: New file.
      * python/tests/.gitignore: New file.
      * qemud/.gitignore: New file.
      * src/.gitignore: New file.
      * tests/.gitignore: New file.
      * tests/confdata/.gitignore: New file.
      * tests/sexpr2xmldata/.gitignore: New file.
      * tests/virshdata/.gitignore: New file.
      * tests/xencapsdata/.gitignore: New file.
      * tests/xmconfigdata/.gitignore: New file.
      * tests/xml2sexprdata/.gitignore: New file.
      164fbbd6
  30. 17 9月, 2008 1 次提交
  31. 09 9月, 2008 1 次提交
  32. 05 9月, 2008 1 次提交
  33. 25 7月, 2008 2 次提交
  34. 25 6月, 2008 1 次提交
  35. 08 5月, 2008 1 次提交
  36. 07 5月, 2008 1 次提交
    • D
      More regression tests for sound support · 0feb4c95
      Daniel Veillard 提交于
      * tests/qemuxml2argvdata/qemuxml2argv-sound.args
        tests/qemuxml2argvdata/qemuxml2argv-sound.xml
        tests/sexpr2xmldata/sexpr2xml-fv-sound-all.sexpr
        tests/sexpr2xmldata/sexpr2xml-fv-sound-all.xml
        tests/sexpr2xmldata/sexpr2xml-fv-sound.sexpr
        tests/sexpr2xmldata/sexpr2xml-fv-sound.xml
        tests/xmconfigdata/test-fullvirt-sound.cfg
        tests/xmconfigdata/test-fullvirt-sound.xml
        tests/xml2sexprdata/xml2sexpr-fv-sound.sexpr
        tests/xml2sexprdata/xml2sexpr-fv-sound.xml: other regression
        tests from previous commit
      Daniel
      0feb4c95
  37. 30 4月, 2008 1 次提交
  38. 26 4月, 2008 1 次提交