From a review after push, add the "_TYPE" into the name.

Also use qemuDomainSecretInfoType in the struct rather than int
with the comment field containing the struct name
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virQEMUCapsNewForBinary unconditionally loads data from cache and probes
using both QMP and -help parsing, which is suboptimal when we want to
use it in tests.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1286709

Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...

Rather than an if statement, use a switch.

The switch will also catch the illegal usage of 'iothread' with some other
kind of unsupported bus configuration.

An iothread for virtio-scsi is a property of the controller. Add a lookup
of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse
the output.  For both, support for the iothread was added in qemu 2.4
while support for virtio-scsi in general was added in qemu 1.4.

Modify the various mock capabilities replies (by hand) to reflect the
when virtio-scsi was supported and then specifically when the iothread
property was added. For versions prior to 1.4, use the no device error
return for virtio-scsi. For versions 1.4 to before 2.4, add some data
for virtio-scsi-pci even though it isn't complete we're not looking for
anything specific there anyway. For 2.4 to 2.6, add a more complete reply.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In majority of our functions we have this variable @ret that is
overwritten a lot. In other areas of the code we use 'goto
cleanup;' just so that this wouldn't happen. But here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This adds a ports= attribute to usb controller XML, like

  <controller type='usb' model='nec-xhci' ports='8'/>

This maps to:

  qemu -device nec-usb-xhci,p2=8,p3=8

Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.

https://bugzilla.redhat.com/show_bug.cgi?id=1271408

Reports whether we support -device nec-usb-xhci,p3=XXX value,
which has been available since qemu 1.3.0

Rather than reimplement it. This will be needed in upcoming patches

In these functions I'm fixing here, we do call
qemuMonitorJSONCheckError() followed by another check if qemu
reply contains 'return' object. If it wouldn't, the former
CheckError() function would error out and the flow would not even
get to the latter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Usually, the flow in this area of the code is as follows:

qemuMonitorJSONMakeCommand()
qemuMonitorJSONCommand()
qemuMonitorJSONCheckError()
parseReply()

But in this function, for some reasons, the last two steps were
swapped. This makes no sense.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In qemuDomainDefAddDefaultDevices we check for a non-NULL
def->os.machine for x86 archs, but not the others.

Moreover, the only caller - qemuDomainDefPostParse
already checks for it and even then it can happen only
if /etc/libvirt contains an XML without a machine type.

Use it everywhere except for virQEMUCapsFillDomainFeatureGICCaps.

It was not indented correctly.

We do not need to propagate the exact return values
and the only possible ones are 0 and -1 anyway.

Remove the temporary variable and use the usual pattern:

if (f() < 0)
    return -1;

This function does not fail and it does not need to return anything.

For all the other machine types, we use a positive condition.

Be more positive and use it for i440fx too.

Do not duplicate the string comparisons by writing them twice.

https://bugzilla.redhat.com/show_bug.cgi?id=1139766

Thing is, for some reasons you can have your domain's RTC to be
in something different than UTC. More weirdly, it's not only time
zone what you can shift it of, but an arbitrary value. So, if
domain is configured that way, libvirt will correctly put it onto
qemu cmd line and moreover track it as this offset changes during
domain's life time (e.g. because guest OS decides the best thing
to do is set new time to RTC). Anyway, they way in which this
tracking is implemented is events. But we've got a problem if
change in guest's RTC occurs and the daemon is not running. The
event is lost and we end up reporting invalid value in domain
XML. Therefore, when the daemon is starting up again and it is
reconnecting to all running domains, re-fetch their RTC so the
correct offset value can be computed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds by default a panic device with model s390 to S390 guests.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.

This patch adds an s390 panic device model and prevents setting a
device address on it.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Adding the default bus type ISA to the message.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

The default USB controller is not sent to destination as the older versions
of libvirt(0.9.4 or earlier as I see in commit log of 409b5f54) didn't
support them. For some archs where the support started much later can
safely send the USB controllers without this worry. So, send the controller
to destination for all archs except x86. Moreover this is not very applicable
to x86 as the USB controller has model ich9_ehci1 on q35 and for pc-i440fx,
there cant be any slots before USB as it is fixed on slot 1.

The patch fixes a bug that, if the USB controller happens to occupy
a slot after disks/interfaces and one of them is hot-unplugged, then
the default USB controller added on destination takes the smallest slot
number and that would lead to savestate mismatch and migration
failure. Seen and verified on PPC64.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

We had both and the only difference was that the latter also included
information about multifunction setting.  The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing).  To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If we failed to build the aliases or attach the chardev, then the props
would be leaked - fix that.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Adjust error path logic to make it clearer how to undo the failed add.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than take username and password as parameters, now take
a qemuDomainSecretInfoPtr and decode within the function.

NB: Having secinfo implies having the username for a plain type
    from a successful virSecretGetSecretString
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Similar to the qemuDomainSecretDiskPrepare, generate the secret
for the Hostdev's prior to call qemuProcessLaunch which calls
qemuBuildCommandLine. Additionally, since the secret is not longer
added as part of building the command, the hotplug code will need
to make the call to add the secret in the hostdevPriv.

Since this then is the last requirement to pass a virConnectPtr
to qemuBuildCommandLine, we now can remove that as part of these
changes. That removal has cascading effects through various callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.

Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than needing to pass the conn parameter to various command
line building API's, add qemuDomainSecretPrepare just prior to the
qemuProcessLaunch which calls qemuBuilCommandLine. The function
must be called after qemuProcessPrepareHost since it's expected
to eventually need the domain masterKey generated during the prepare
host call. Additionally, future patches may require device aliases
(assigned during the prepare domain call) in order to associate
the secret objects.

The qemuDomainSecretDestroy is called after the qemuProcessLaunch
finishes in order to clear and free memory used by the secrets
that were recently prepared, so they are not kept around in memory
too long.

Placing the setup here is beneficial for future patches which will
need the domain masterKey in order to generate an encrypted secret
along with an initialization vector to be saved and passed (since
the masterKey shouldn't be passed around).

Finally, since the secret is not added during command line build,
the hotplug code will need to get the secret into the private disk data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a new private structure to hold qemu domain auth/secret data.
This will be stored in the qemuDomainDiskPrivate as a means to store the
auth and fetched secret data rather than generating during building of
the command line.

The initial changes will handle the current username and secret values
for rbd and iscsi disks (in their various forms). The rbd secret is
stored as a base64 encoded value, while the iscsi secret is stored as
a plain text value. Future changes will store encoded/encrypted secret
data as well as an initialization vector needed to be given to qemu
in order to decrypt the encoded password along with the domain masterKey.
The inital assumption will be that VIR_DOMAIN_SECRET_INFO_PLAIN is
being used.

Although it's expected that the cleanup of the secret data will be
done immediately after command line generation, reintroduce the object
dispose function qemuDomainDiskPrivateDispose to handle removing
memory associated with the structure for "normal" cleanup paths.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>