- 11 8月, 2009 7 次提交
-
-
由 Chris Lalancette 提交于
Minor fix to openvzGetVPSUUID to make it take a length parameter. This ensures that it doesn't make assumptions about the length of the UUID buffer, and paves the way for removal of strncpy in the future. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
As of qemu 0.10.6, qemu now honors the -S flag on incoming migration. That means that when the migration completes, we have to issue a 'cont' command to get the VM running again. We do it unconditionally since it won't hurt on older qemu. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Re-factor virDomainMigrate to split out the version 1 and version 2 protocols into their own functions. In reality, the two versions share very little in common, so forcing them together in the same function was just confusing. This will also make adding tunnelled migration easier. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
When doing a restore, we were forgetting to update the state file for the VM. That means that if you do a save/restore, then shut down libvirtd, then start it back up, you'll see the state of the guest as "paused", even though it is really running. We were just forgetting a "virDomainSaveStatus" call in the restor path. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 10 8月, 2009 3 次提交
-
-
由 Mark McLoughlin 提交于
If the ipv6 kernel module is not loaded, then we get this when starting a virtual network: libvir: Network Config error : cannot enable /proc/sys/net/ipv6/conf/virbr0/disable_ipv6: No such file or directory If disable_ipv6 is not present, we should just merrily continue on our way. * src/network_driver.c: make networkDisableIPV6() not fail if the kernel has no ipv6 support
-
由 Mark McLoughlin 提交于
Allow qemu user to open kernel/initrds in this dir, but still prevent others from listing it. * libvirt.spec.in: set /var/lib/libvirt/boot perms to 0711
-
由 Mark McLoughlin 提交于
If we're running qemu unprivileged, we need to chown any supplied kernel or initrd before spawning it. * src/qemu_driver.c: rename qemuDomainSetDiskOwnership() to qemuDomainSetFileOwnership(), pass it a path string instead of a disk definition and use it for chowning the kernel/initrd in qemuDomainSetAllDeviceOwnership()
-
- 07 8月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Chris Lalancette 提交于
While trying to remove uses of unsafe strncpy in the tree, I came across a couple of usages in the ESX driver. To my eyes, the snprintf replacements do the same thing in less code, and are also safer. Signed-off-by: NChris Lalancette <clalance@redhat.com> Tested-by: NMattias Bolte <matthias.bolte@googlemail.com>
-
- 06 8月, 2009 8 次提交
-
-
由 Amy Griffis 提交于
* docs/logging.html[.in] try to include a little more description about the corner cases, things someone might get hung up on on.
-
由 Amy Griffis 提交于
* src/logging.c src/logging.h src/libvirt_private.syms: define new functions virLogSetFromEnv and virLogParseDefaultPriority * qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the unified functions
-
由 Amy Griffis 提交于
* tests/eventtest.c: don't covert high priority levels to debug level. Consider an invalid priority level setting a setup failure.
-
由 Amy Griffis 提交于
* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise they can override a valid setting from the config file. Send all settings through the parser functions for validation, so that the existence of a bad setting doesn't nullify a good setting that should have applied -- particularly the default output. Keep the order of precedence consistent for all variables between the environment and the config file. Warn when an invalid log level, filter, or output is ignored. * src/libvirt_private.syms: export internally a few convenience functions
-
由 Amy Griffis 提交于
* src/libvirt.c src/logging.c: Don't convert high priority levels to the debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS when they're set to the empty string. Warn when the user specifies an invalid value (empty string remains a noop). * po/POTFILES.in: src/logging.c now include translatable strings
-
由 Matthias Bolte 提交于
* src/esx/esx_driver.c src/esx/esx_util.[ch] src/esx/esx_vi.[ch]: just a name change
-
由 Matthias Bolte 提交于
* src/esx/esx_driver.c: if esxOpen failed, priv->transport wasn't freed
-
由 Matthias Bolte 提交于
* src/esx/esx_driver.c: catch an unchecked strdup in esxDomainGetOSType()
-
- 05 8月, 2009 18 次提交
-
-
由 Daniel Veillard 提交于
* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h: Release of 0.7.0 * po/*.po*: updated and regenerated the localization pool
-
由 Ryota Ozaki 提交于
* src/storage_backend.c: as the absence of units can be interpreted in diverging ways depending on the version
-
由 Daniel P. Berrange 提交于
* src/lxc_driver.c: Check for name & UUID uniqueness when defining or creating domains
-
由 Daniel P. Berrange 提交于
* src/lxc_driver.c: Remove transient VM after monitor triggered shutdown
-
由 Daniel P. Berrange 提交于
* src/lxc_controller.c: Don't throw error in LXC startup if the cgroups driver mount isn't available. Improve error logging for resource setup
-
由 Daniel P. Berrange 提交于
* configure.in: Don't set AM_CONDITIIONAL until *after* making the checks
-
由 Daniel P. Berrange 提交于
* src/xm_internal.c: split the implementations of xenInotifyActive()
-
由 Aron Griffis 提交于
* docs/schemas/*.rng: the comments were wrong * src/qemu_conf.c: typo in an error message
-
由 Cole Robinson 提交于
* src/xm_internal.c: in case of multiple connections to the xen driver and some clients were not using domain events, the whole /etc/xen monitoring would break leading to disapearing domains.
-
由 Cole Robinson 提交于
* src/xm_internal.c: bug when redefining a domain, if it was running we would loose its id
-
由 Daniel Veillard 提交于
* src/xend_internal.c: extraneous ; in xenDaemonParseSxprGraphicsNew
-
由 Maximilian Wilhelm 提交于
* src/storage_conf.c src/internal.h: move previous check in internal.h and add a workaround for a GCC bug in Debian Etch on limit definitions
-
由 Maximilian Wilhelm 提交于
* configure.in: to activate Xen Inotify checking we need to check for sys/inotify.h availability
-
由 Maximilian Wilhelm 提交于
* configure.in: make it check by default for both
-
由 Maximilian Wilhelm 提交于
* configure.in: UML support requires sys/inotify.h so make it check by default.
-
由 Maximilian Wilhelm 提交于
* configure.in: if libcurl is not present ESX should be desactivated so default to check for esx
-
由 Matthias Bolte 提交于
* src/esx/esx_driver.c src/esx/esx_vi.[ch] src/esx/esx_vmx.[ch]: adds version checking for GSX 2.0, allows to pass a specific port for the connection and also add a new specific gsx scheme for easier connections to GSX hosts
-
由 Daniel P. Berrange 提交于
Fix https://bugzilla.redhat.com/show_bug.cgi?id=479517 * src/buf.c: Cast to 'unsigned char' before doing compare to avoid rejecting 8-bit high characters
-
- 03 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/openvz_driver.c: Remove unneccessary strdup() on hypervisor type api call
-
- 02 8月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-