When the backing store of a volume wasn't accessible while updating the
volume definition the call would fail altogether. In cases where we
currently (incorrectly) treat remote backing stores as local one this
might lead to strange errors.

Ignore the opening errors until we figure out how to track proper volume
metadata.

Use the backing store parser to properly create the information about a
volume's backing store. Unfortunately as the storage driver isn't
prepared to allow volumes backed by networked filesystems add a
workaround that will avoid changing the XML output.

Move the processing of the backend metadata directly to the helper
instead of passing it through arguments to the function.

virStorageBackendFileSystemRefresh() used "cleanup" label just for error
exits and didn't meet libvirt's standard for braces in one case.

As we have a nested pointer for storing the backing store of a volume
there's no need to store it in a separate struct.

Assign the value we're comparing:
(val = func()) < 0
instead of assigning the comparison value:
(val = func() < 0)

Both were introduced along with the code,
the TLS tests by commit bd789dff in 0.9.4
net events by commit de87691f in 1.2.2.

Note that the event id type fix is a no-op:
vshNetworkEventIdTypeFromString can only return
-1 (failure) and the event is never used or
0 (the only possible event) and the value of 0 < 0 is still 0.

https://bugzilla.redhat.com/show_bug.cgi?id=1119592

Introduced by commit 62927dd8 v0.7.6.

Commit 20e01504 broke 'make rpm':

error: line 540: Unknown tag:     %elif 020 >= 12 || 0 >= 6

Apparently, even though shell has elif so that you can do a chain
of conditionals, the rpm spec file does not, and you have to nest
things instead.

* libvirt.spec.in: Convert %elif to proper nested %if.
Signed-off-by: NEric Blake <eblake@redhat.com>

Rework the apparmor lxc profile abstraction to mimic ubuntu's container-default.
This profile allows quite a lot, but strives to restrict access to
dangerous resources.

Removing the explicit authorizations to bash, systemd and cron files,
forces them to keep the lxc profile for all applications inside the
container. PUx permissions where leading to running systemd (and others
tasks) unconfined.

Put the generic files, network and capabilities restrictions directly
in the TEMPLATE.lxc: this way, users can restrict them on a per
container basis.

Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.

Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.

Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.

'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG' was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Add code to support attach/detaching a network device.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Missing HOSTDEV type in libxlDomainDetachDeviceConfig. Add it.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Use secured polkit on distros which provide it. However, RHEL-6 will
still allow for older polkit-0.93 rather than forcing polkit-0.96-5
which is not available in all RHEL-6 releases.

4cc1f1a0 introduced a crash when doing a
block copy as virStorageSourceInitChainElement was called on
"disk->mirror" that is still NULL at that point instead of "mirror"
which temporarily holds the mirror source struct until it's fully
initialized. This resulted into a crash as a NULL was dereferenced.

Reported by: Shanzi Yu <shyu@redhat.com>

Commit id '3ea661de' refactored the code to use the 'disk->src->path'
instead of getting the path from virDomainDiskGetSource().  The one
call to qemuOpenFile() didn't use the disk source path, rather it used
the path as passed from the caller (in this case 'vda') - this caused
a failure with the virt-test/tp-libvirt as follows:

$ virsh domblkinfo virt-tests-vm1 vda
error: cannot stat file '/home/virt-test/shared/data/images/jeos-20-64.qcow2': Bad file descriptor

$

While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Our documentation for features was rather sparse; this fleshes out
more of the details for other existing capabilities (and cost me
some time trawling git history).

* docs/formatcaps.html.in: Document it feature bits.
Signed-off-by: NEric Blake <eblake@redhat.com>

If the openvswitch service is stopped, and is followed by destroying a
VM, the openvswitch bridge translates into a state where it doesn't
recover the port configuration. While it successfully fetches data
from the internal DB, since the corresponding virtual interface does
not exists anymore the whole recovery process fails leaving restarted
VM with inability to connect to the bridge. The following set of
commands will trigger the problem:

virsh start vm
service openvswitch-switch stop
virsh destroy vm
service openvswitch-switch start
virsh start vm
Signed-off-by: NChunhe Li <lichunhe@huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Resolve issue introduced by commit id '13adf1b2'

Instead of allocating the virSecurityLabelDef structure ourselves, we
can utilize virSecurityLabelDefNew which even sets the default values
for us.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1113860

We've always done that. Well, until 990e46c4. Point is, if we don't
format model, we may lose a domain on libvirtd restart. If the
seclabel is implicit however, we should skip it's formatting.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Snapshots and block-copy have a flag that forces qemu to re-use existing
file. Our docs weren't exactly clear on what the existing file should
contain for this to actually work.

Re-word the docs a bit to state that the file needs to be pre-created in
the desired format and the backing chain metadata needs to be set prior
to handing it over to qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1084360

Libvirt generates external snapshot target file names for file backed
storage but not for block backed storage. Document the limitation.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1032363

Commit dae1568c converted the perms
member of the virStorageVolTarget struct into a pointer to make it
optional. But virStorageVolTargetDefFormat did not check perms for
NULL before dereferencing it.

Don't fail when there is nothing to do, as a tweak to the previous
patch regarding output of libvirt-UUID.files for LXC apparmor profiles
Signed-off-by: NEric Blake <eblake@redhat.com>

This was converted to a typedef in 5a2bd4c9 "conf: more enum
cleanups in "src/conf/domain_conf.h"" causing:
    libxl/libxl_conf.c: In function 'libxlDiskSetDiscard':
    libxl/libxl_conf.c:724:19: error: conversion to incomplete type
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>

In lxc, we could not use setmem command
with --config options.
This patch will add support for this.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1066894

With current code it's possible to have for instance:

virsh dumpxml mydomain | grep seclabel
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>

what doesn't make any sense. We should reject the XML in the config
parsing phase.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similarly to the previous commit, boolean variables should not start
with 'no-' prefix.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This negation in names of boolean variables is driving me insane. The
code is much more readable if we drop the 'no-' prefix. Well, at least
for me.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For non-local storage drivers we can't expect to use the FDStream
backend for up/downloading volumes. Split the code into a separate
backend function so that we can add protocol specific code later.

This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
  <channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.

Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided

an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf

Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html

Commit 65d8c92a fixed the mingw spec file for 32-bit builds,
but forgot to make the adjustment for 64-bit builds:

Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/eblake/rpmbuild/BUILDROOT/mingw-libvirt-1.2.7-1.fc20.eblake1404944503.x86_64
error: Installed (but unpackaged) file(s) found:
   /usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/libvirt-lxc.pc
   /usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/libvirt-qemu.pc

* mingw-libvirt.spec.in (%files): List missing .pc files.
Signed-off-by: NEric Blake <eblake@redhat.com>

Pavel flagged a build regression under mingw, and traced it to a
recent flaw in gnulib for working around nl_langinfo. This picks
up the fix.

* gnulib: Update to latest, for mingw build fixes.
Signed-off-by: NEric Blake <eblake@redhat.com>

Translate libvirt discard settings into libxl-4.5 discard settings.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>

When creating cgroups for vcpu and emulator threads whilst starting a
domain, we explicitly skip creating those cgroups in case priv->cgroup
is NULL (cgroups not supported) because SetAffinity() serves the same
purpose.  If the host supports only some cgroups (the ones we need are
either unmounted or disabled in qemu.conf), we error out with weird
message even though we could continue starting the domain.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097028Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>