Use atomic ops to increment nextvmid and encapsulate it in a
method to prevent accidental non-atomic access

The APIs names for accessing the domain list object are
very inconsistent. Rename them all to have a standard
virDomainObjList prefix.

Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the current QEMU driver code for managing port
reservations with the new virPortAllocator APIs.

This introduces a hash table for qemu driver, to store the shared
disk's info as (@major:minor, @ref_count). @ref_count is the number
of domains which shares the disk.

Since we only care about if the disk support unprivileged SG_IO
commands, and the SG_IO commands only make sense for block disk,
this patch only manages (add/remove hash entry) the shared disk for
block disk.

* src/qemu/qemu_conf.h: (Add member 'sharedDisks' of type
                         virHashTablePtr; Declare helpers
                         qemuGetSharedDiskKey, qemuAddSharedDisk
                         and qemuRemoveSharedDisk)
* src/qemu/qemu_conf.c (Implement the 3 helpers)
* src/qemu/qemu_process.c (Update 'sharedDisks' when domain
                           starting and shutdown)
* src/qemu/qemu_driver.c (Update 'sharedDisks' when attaching
                          or detaching disk).

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Refactor virLockManagerPluginNew() so that the caller does
not need to pass in the config file path itself - just the
config directory and driver name.

Fix QEMU to actually pass in a config file when creating the
default lock manager plugin, rather than NULL.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style

Change some legacy function names to use 'qemu' as their
prefix instead of 'qemud' which was a hang over from when
the QEMU driver ran inside a separate daemon
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is required in case a lock manager needs to contact libvirtd in
case of an unexpected event.

When building up a virCapsPtr instance, the QEMU driver
was copying the list of machine types across from the
previous virCapsPtr instance, if the QEMU binary had not
changed. Replace this ad-hoc caching of data with use
of the new qemuCapsCache global cache.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

The defines QEMU_REMOTE_PORT_MIN and QEMU_REMOTE_PORT_MAX were used to
find free port when starting domains. As this was hard-coded to the
same ports as default VNC servers, there were races with these other
programs. This patch includes the possibility to change the default
starting port as well as the maximum port (mostly for completeness) in
qemu config file.

Support for two new config options in qemu.conf is added:
 - remote_port_min (defaults to QEMU_REMOTE_PORT_MIN and
   must be >= than this value)
 - remote_port_max (defaults to QEMU_REMOTE_PORT_MAX and
   must be <= than this value)

Port allocations for SPICE and VNC behave almost the same (with
default ports), but there is some mess in the code. This patch clears
these inconsistencies and makes sure the same behavior will be used
when ports for remote displays are changed.

Changes:
 - hard-coded number 5900 removed (handled elsewhere like with VNC)
 - reservedVNCPorts renamed to reservedRemotePorts (it's not just for
   VNC anymore)
 - QEMU_VNC_PORT_{MIN,MAX} renamed to QEMU_REMOTE_PORT_{MIN,MAX}
 - port allocation unified for VNC and SPICE

This patch updates the key "security_driver" in QEMU config to suport
both a sigle default driver or a list of default drivers. This ensures
that it will remain compatible with older versions of the config file.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the QEMU driver to use virReportError instead of
the qemuReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add support for registering arbitrary callback to be called for a domain
when a connection gets closed.

Curently security labels can be of type 'dynamic' or 'static'.
If no security label is given, then 'dynamic' is assumed. The
current code takes advantage of this default, and avoids even
saving <seclabel> elements with type='dynamic' to disk. This
means if you temporarily change security driver, the guests
can all still start.

With the introduction of sVirt to LXC though, there needs to be
a new default of 'none' to allow unconfined LXC containers.

This patch introduces two new security label types

 - default:  the host configuration decides whether to run the
             guest with type 'none' or 'dynamic' at guest start
 - none:     the guest will run unconfined by security policy

The 'none' label type will obviously be undesirable for some
deployments, so a new qemu.conf option allows a host admin to
mandate confined guests. It is also possible to turn off default
confinement

  security_default_confined = 1|0  (default == 1)
  security_require_confined = 1|0  (default == 0)

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add new
  seclabel types
* src/security/security_manager.c, src/security/security_manager.h:
  Set default sec label types
* src/security/security_selinux.c: Handle 'none' seclabel type
* src/qemu/qemu.conf, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
  src/qemu/libvirtd_qemu.aug: New security config options
* src/qemu/qemu_driver.c: Tell security driver about default
  config

pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)

if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
    return -1;

..skipped...

if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
    goto reattachdevs;

NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667

This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:

  * Add the device to inactive list during nodedev-dettach
  * Remove the device from inactive list during nodedev-reattach
  * Remove the device from inactive list during attach-device
    (for non-managed device)
  * Add the device to inactive list after detach-device, only
    if the device is not managed

With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)

if (pciResetDevice(dev, driver->activePciHostdevs,
                   driver->inactivePciHostdevs) < 0)
    goto reattachdevs;

In order to avoid situation where a USB device is
in use by two domains, we must keep a list of already
attached devices like we do for PCI.

This patch adds max_files option to qemu.conf which can be used to
override system default limit on number of opened files that are
allowed for qemu user.

Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers

* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
  Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
  src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
  paths & remove conditional compilation

Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives

The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.

This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.

The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation

* src/util/bridge.c, src/util/bridge.h: Remove brControl object
  and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
  src/qemu/qemu_driver.c: Remove reference to 'brControl' object

If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.

To check for disk status use 'info block' monitor command.

This patch creates an optional BeginJob queue size limit. When
active, all other attempts above level will fail. To set this
feature assign desired value to max_queued variable in qemu.conf.
Setting it to 0 turns it off.