We don't want to inherit any FDs in the new namespace
except for the stdio FDs. Explicitly close them all,
just in case some do not have the close-on-exec flag
set.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
(cherry picked from commit b7fcc799)

Check return value of virStreamNew when called by cmdVolUpload and
cmdVolDownload.

'make distcheck' fails from a directory configured --without-lxc:

  GEN      virt-login-shell.1
Can't write-open ../../tools/virt-login-shell.1: Permission denied at /usr/bin/pod2man line 69.

* tools/Makefile.am (EXTRA_DIST): Ship pre-built man page.
Signed-off-by: NEric Blake <eblake@redhat.com>

It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
          autoport='yes' listen='127.0.0.1'
          defaultMode='secure'>

However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.

This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

After commit 8aecd351 it'll detect
that a required option is not defined and it will assert and exit with:

virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.

Problem has been latent since commit ed23b106.
Signed-off-by: NEric Blake <eblake@redhat.com>

completer and completer_flags added to the _vshCmdOptDef
structure so it will be possible for completion generators to
conveniently call option completer functions with desired flags.
Signed-off-by: NEric Blake <eblake@redhat.com>

Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.

Reported by GuanQiang.

The metadata modification functions will support modification of the XML
metadata. Add a virsh command to allow using this approach.

Line up the array so that the grid is visible.

The "cmd" variable is actually used so remove the attribute.

What should be checked here is xmlbuf rather than buf.

Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.
Signed-off-by: Nyangdongsheng <yangds.fnst@cn.fujitsu.com>

Signed-off-by: NAlex Jia <ajia@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1006864

Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.

Signed-off-by: NAlex Jia <ajia@redhat.com>

The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Recent patches to fix handling of Ctrl-C when interacting with
ssh are not portable to mingw, which lacks termios handling.
The simplest solution is to just compile that code out, and
if someone ever appears that has a serious interest in getting
virsh fully functional even with ssh connections, they can
provide patches at that time.

* tools/virsh.h (_vshControl): Make termattr conditional.
* tools/virsh.c (vshTTYIsInterruptCharacter)
(vshTTYDisableInterrupt, vshTTYRestore, cfmakeraw, vshTTYMakeRaw)
(main): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO

An example error message when using the wrong name:

daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE

As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.

Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.

* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Man page for signal states:

 "The effects of signal() in a multithreaded process are unspecified."

Switch signal() to sigaction in virsh console code.

Move the function to virsh.c to the rest of the TTY managing functions
and change the code so that it mirrors the rest.

The vshWatchJob function registers a SIGINT handler that is used to
abort the active job and does not terminate virsh. Unfortunately, this
breaks when using the ssh transport as SIGINT is sent to the foreground
process group including the ssh transport processes which terminate.
This breaks the connection and migration is left in a insane state.

With this patch the terminal is modified to ignore key binding that
sends SIGINT and does the handling manually.

Resoves: https://bugzilla.redhat.com/show_bug.cgi?id=983348

This patch adds instrumentation to allow modification of config of the
terminal in virsh and successful reset of the state afterwards.

The added helpers allow to disable receiving of SIGINT when pressing the
key sequence (Ctrl+C usualy). This normally sends SIGINT to the
foreground process group which kills ssh processes used for transport of
the data.

When virBufferError is ok in cmdAttachDisk, the latter
should 'goto cleanup', instead of returning a false to
prevent memory leaking.
Signed-off-by: NEric Blake <eblake@redhat.com>

I noticed from an ./autobuild.sh run that we were installing a
virt-login-shell.exe binary when cross-building for mingw,
even though such a binary is necessarily worthless since the
code depends on lxc which is a Linux-only concept.

* tools/Makefile.am (conf_DATA, bin_PROGRAMS, dist_man1_MANS):
Make virt-login-shell installation conditional.
Signed-off-by: NEric Blake <eblake@redhat.com>

Noticed while reviewing another patch that had an accidental
mismatch due to refactoring.  An audit of the code showed that
very few callers of vshCommandOpt were expecting a return of
-2, indicating programmer error, and of those that DID check,
they just propagated that status to yet another caller that
did not check.  Fix this by making the code blatantly warn
the programmer, rather than silently ignoring it and possibly
doing the wrong thing downstream.

I know that we frown on assert()/abort() inside libvirtd
(libraries should NEVER kill the program that linked them),
but as virsh is an app rather than the library, and as this
is not the first use of assert() in virsh, I think this
approach is okay.

* tools/virsh.h (vshCommandOpt): Drop declaration.
* tools/virsh.c (vshCommandOpt): Make static, and add a
parameter.  Abort on programmer errors rather than making callers
repeat that logic.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptStringReq)
(vshCommandOptLongLong, vshCommandOptULongLong)
(vshCommandOptBool): Adjust callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

Surprisingly, augtool get (or print) returns "path = value" while we are
only interested in the value. We need to remove the "path = " part from
the augtool's output. The following is an example of the augtool command
as used in virt-sanlock-cleanup script:

$ augtool get /files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir
/files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir = /var/lib/libvirt/sanlock

Commit a0b6a36f "fixed" what abfff210 broke (URI precedence), but
there was still one more thing missing to fix.  When using virsh
parameters to setup debugging, those weren't honored, because at the
time debugging was initializing, arguments weren't parsed yet.  To
make ewerything work as expected, we need to initialize the debugging
twice, once before debugging (so we can debug option parsing properly)
and then again after these options are parsed.

As a side effect, this patch also fixes a leak when virsh is ran with
multiple '-l' parameters.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since 785ff34b we are using the outputStr variable in cleanup label.
However, there is a possibility to jump to the label before the variable
has been declared:

virsh-pool.c: In function 'cmdPoolList':
virsh-pool.c:1121:25: error: jump skips variable initialization [-Werror=jump-misses-init]
                         goto asprintf_failure;
                         ^
virsh-pool.c:1308:1: note: label 'asprintf_failure' defined here
 asprintf_failure:
 ^
virsh-pool.c:1267:11: note: 'outputStr' declared here
     char *outputStr = NULL;

VIR_FREE(caps) is not enough to free an array allocated
by vshStringToArray.

==17== 4 bytes in 1 blocks are definitely lost in loss record 4 of 728
==17==    by 0x4EFFC44: virStrdup (virstring.c:554)
==17==    by 0x128B10: _vshStrdup (virsh.c:125)
==17==    by 0x129164: vshStringToArray (virsh.c:218)
==17==    by 0x157BB3: cmdNodeListDevices (virsh-nodedev.c:409)

https://bugzilla.redhat.com/show_bug.cgi?id=1001536

==23== 41 bytes in 1 blocks are definitely lost in loss record 626 of 727
==23==    by 0x4F0099F: virAsprintfInternal (virstring.c:358)
==23==    by 0x15D2C9: cmdPoolList (virsh-pool.c:1268)

https://bugzilla.redhat.com/show_bug.cgi?id=1001536

virsh secret-list leak when no secrets are defined:

==27== 8 bytes in 1 blocks are definitely lost in loss record 6 of 726
==27==    by 0x4E941DD: virAllocN (viralloc.c:183)
==27==    by 0x5037F1A: remoteConnectListAllSecrets (remote_driver.c:3076)
==27==    by 0x5004EC6: virConnectListAllSecrets (libvirt.c:16298)
==27==    by 0x15F813: vshSecretListCollect (virsh-secret.c:397)
==27==    by 0x15F0E1: cmdSecretList (virsh-secret.c:532)

And so do some other *-list commands.

https://bugzilla.redhat.com/show_bug.cgi?id=1001536

The messages were only freed on error.

==12== 1,100 bytes in 1 blocks are definitely lost in loss record 698 of 729
==12==    by 0x4E98C22: virBufferAsprintf (virbuffer.c:294)
==12==    by 0x12C950: vshOutputLogFile (virsh.c:2440)
==12==    by 0x12880B: vshError (virsh.c:2254)
==12==    by 0x131957: vshCommandOptDomainBy (virsh-domain.c:109)
==12==    by 0x14253E: cmdStart (virsh-domain.c:3333)

https://bugzilla.redhat.com/show_bug.cgi?id=1001536

virsh cpu-stats guest --start 0 --count 3
It outputs right but the return value is 1 rather than 0
echo $?
1

Found by running libvirt-autotest
./run -t libvirt --tests virsh_cpu_stats

Change info_domfstrim and opts_lxc_enter_namespace initialization style
to C99.