Make the domain define/undefine driver methods directly call
into either the XenD or XM drivers
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Directly call either the XenD or XM driver when starting
a persistent domain
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Directly call either XenD or the XM driver for handling
domain define operations.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

All the migration code is done by the XenD subdriver which
can be assumed to always be present
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The xenUnifiedDomainGetXMLDesc driver can assume that
the XM and XenD drivers are always present
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally call the XenD APIs for save/restore, since that
driver will always be open.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Make the xenUnifiedDomainGetInfo and xenUnifiedDomainGetState drivers
call the correct sub-driver APIs directly.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Simplify the Xen memory limit driver methods to directly call
the most appropriate sub-driver
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The xenGetHostname entry point in the xenUnifiedDriver table
was unused.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Make xenUnifiedDomainGetOSType directly call either the
xenHypervisorDomainGetOSType or xenDaemonDomainGetOSType
method depending on whether the domain is active or not.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally call the xenDaemonDomainDestroyFlags API
since the XenD driver is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Make the xenUnifiedDomainShutdownFlags and xenUnifiedDomainReboot
driver methods unconditionally call the XenD APIs for shutdown
and reboot. Delete the unreachable impls in the XenStore driver.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update xenUnifiedDomainSuspend and xenUnifiedDomainResume to
unconditionally invoke the XenD APIs for suspend/resume. Delete
the impls in the hypervisor driver which was unreachable.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally call xenDaemonLookupByUUID, since the XenD
driver must always be present.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally invoke the xenHypervisorLookupDomainByID,
xenHypervisorLookupDomainByUUID or xenDaemonLookupByName
for looking up domains. Fallback to xenXMDomainLookupByUUID
and xenXMDomainLookupByName for legacy XenD without inactive
domain support
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally call xenDaemonCreateXML in the
xenUnifiedDomainCreateXML driver, since the XenD
driver is always present.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The XenStore driver is mandatory, so it can be used unconditonally
for the xenUnifiedConnectListDomains & xenUnifiedConnectNumOfDomains
drivers. Delete the unused XenD and Hypervisor driver code for
listing / counting domains
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Unconditionally call into xenHypervisorGetMaxVcpus and
xenDaemonNodeGetInfo respectively, since those drivers
are both mandatory
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The hypervisor driver is mandatory, so the the call to
xenHypervisorGetVersion must always succeed. Thus there
is no need to ever run xenDaemonGetVersion
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There is no point iterating over sub-drivers since the user
would not have a virConnectPtr instance at all if opening
the drivers failed. Just return 'Xen' immediately.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since the Xen driver was changed to only execute inside libvirtd,
there is no scenario in which it will be opened from a non-privileged
context. Thus all the code dealing with opening the sub-drivers can
be simplified to assume that they are always privileged.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The Xen driver uses a macro GET_PRIVATE as a supposed shorthand
for 'xenUnifiedPrivatePtr priv = (xenUnifiedPrivatePtr) (conn)->privateData'.
It does not in fact save any lines of code, and obscures what is
happening. Remove it, since it adds no value.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some of the Xen sub-drivers have checks against the
VIR_CONNECT_RO flag. This is not required, since such
checks are done at the top level before the driver
methods are invoked
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The Xen hypervisor driver checks for 'priv->handle < 0' and
returns -1, but without raising any error. Fortunately this
code will never be executed, since the main Xen driver always
checks 'priv->opened[XEN_UNIFIED_HYPERVISOR_OFFSET]' prior
to invoking any hypervisor API. Just remove the redundant
checks for priv->handle
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The individual hypervisor drivers were directly referencing
APIs in virnodesuspend.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be removed
from the virnodesuspend.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.

This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.

Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

virAsprintf(&foo, "%s", bar) is wasteful compared to
foo = strdup(bar) (or eventually, VIR_STRDUP(foo, bar),
but one thing at a time...).

Noticed while reviewing Laine's attempt to clean up broken
qemu:///session.

* cfg.mk (sc_prohibit_asprintf): Enhance rule.
* src/esx/esx_storage_backend_vmfs.c
(esxStorageBackendVMFSVolumeLookupByKey): Fix offender.
* src/network/bridge_driver.c (networkStateInitialize): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopDHCPOpen):
Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogRefreshVol): Likewise.
* src/util/vircgroup.c (virCgroupAddTaskStrController): Likewise.
* src/util/virdnsmasq.c (addnhostsAdd): Likewise.
* src/xen/block_stats.c (xenLinuxDomainDeviceID): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectOpen): Likewise.
* tools/virsh.c (vshGetTypedParamValue): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:

  /sys/bus/pci/dddd:bb:ss.ff/driver

Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.

This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.

For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.

This was the only hypervisor driver other than qemu that implemented
virNodeDeviceDettach. It doesn't currently support multiple pci device
assignment driver backends, but it is simple to plug in this new API,
which will make it easier for Xen people to fill it in later when they
decide to support VFIO (or whatever other) device assignment. Also it
means that management applications will have the same API available to
them for both hypervisors on any given version of libvirt.

The only acceptable value for driverName in this case is NULL, since
there is no alternate, and I'm not willing to pick a name for the
default driver used by Xen.

There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".

Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.

eg for the public API   virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Detected by a simple Shell script:

for i in $(git ls-files -- '*.[ch]'); do
    awk 'BEGIN {
        fail=0
    }
    /# *include.*\.h/{
        match($0, /["<][^">]*[">]/)
        arr[substr($0, RSTART+1, RLENGTH-2)]++
    }
    END {
        for (key in arr) {
            if (arr[key] > 1) {
                fail=1
                printf("%d %s\n", arr[key], key)
            }
        }
        if (fail == 1)
            exit 1
    }' $i

    if test $? != 0; then
        echo "Duplicate header(s) in $i"
    fi
done;

A later patch will add the syntax-check to avoid duplicate
headers.

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.

Move the xmlopt and caps arguments to the end of the argument list.