Some functions in this file were returning 1 on success and 0 on
failure, and others were returning 0 on success and -1 on
failure. Switch them all to return the libvirt-preferred 0/-1.

The functions in iptables.c all return -1 on failure, but all their
callers (which all happen to be in bridge_driver.c) assume that they
are returning an errno, and the logging is done accordingly. This
patch fixes all the error checking and logging to assume < 0 is an
error, and nothing else.

While not technically a double free (since VIR_FREE NULLs the
pointer), this is unnecessary extra code.

This crept in when the function was converted from virRun to virCommand.

The AUTHORS file has also been updated.

This is pretty straightforward - even though dnsmasq gets daemonized
and uses a pid file, those things are both handled by the dnsmasq
binary itself. And libvirt doesn't need any of the output of the
dnsmasq command either, so we just setup the args and call
virRun(). Mainly it was just a (mostly) mechanical job of replacing
the APPEND_ARG() macro (and some other *printfs()) with
virCommandAddArg*().

This patch adds a mode_t parameter to virFileWriteStr().
If mode is different from 0, virFileWriteStr() will try
to create the file if it doesn't exist.

* src/util/util.h (virFileWriteStr): Alter signature.
* src/util/util.c (virFileWriteStr): Allow file creation.
* src/network/bridge_driver.c (networkEnableIpForwarding)
(networkDisableIPV6): Adjust clients.
* src/node_device/node_device_driver.c
(nodeDeviceVportCreateDelete): Likewise.
* src/util/cgroup.c (virCgroupSetValueStr): Likewise.
* src/util/pci.c (pciBindDeviceToStub, pciUnBindDeviceFromStub):
Likewise.

* bootstrap.conf (gnulib_modules): Add configmake.
* daemon/Makefile.am (libvirtd_CFLAGS): Drop defines provided by
gnulib.
* src/Makefile.am (INCLUDES): Likewise.
* tests/Makefile.am (INCLUDES): Likewise.
* tools/Makefile.am (virsh_CFLAGS): Likewise.
* daemon/libvirtd.c (qemudInitPaths, usage, main): Update
clients.
* src/cpu/cpu_map.c (CPUMAPFILE): Likewise.
* src/driver.c (DEFAULT_DRIVER_DIR): Likewise.
* src/internal.h (_): Likewise.
* src/libvirt.c (virInitialize): Likewise.
* src/lxc/lxc_conf.h (LXC_CONFIG_DIR, LXC_STATE_DIR, LXC_LOG_DIR):
Likewise.
* src/lxc/lxc_conf.c (lxcCapsInit, lxcLoadDriverConfig):
Likewise.
* src/network/bridge_driver.c (NETWORK_PID_DIR)
(NETWORK_STATE_DIR, DNSMASQ_STATE_DIR, networkStartup): Likewise.
* src/nwfilter/nwfilter_driver.c (nwfilterDriverStartup):
Likewise.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Likewise.
* src/qemu/qemu_driver.c (qemudStartup): Likewise.
* src/remote/remote_driver.h (LIBVIRTD_PRIV_UNIX_SOCKET)
(LIBVIRTD_PRIV_UNIX_SOCKET_RO, LIBVIRTD_CONFIGURATION_FILE)
(LIBVIRT_PKI_DIR): Likewise.
* src/secret/secret_driver.c (secretDriverStartup): Likewise.
* src/security/security_apparmor.c (VIRT_AA_HELPER): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/storage_backend_disk.c (PARTHELPER): Likewise.
* src/storage/storage_driver.c (storageDriverStartup): Likewise.
* src/uml/uml_driver.c (TEMPDIR, umlStartup): Likewise.
* src/util/hooks.c (LIBVIRT_HOOK_DIR): Likewise.
* tools/virsh.c (main): Likewise.
* docs/hooks.html.in: Likewise.

During virtual network startup, the iptables rule that allows tftp
traffic is only added if network->def->tftproot is non-empty, but when
the virtual network is destroyed, we had been unconditionally trying
to delete the rule. This was harmless, except that it created a bogus
error message.

This patch conditionalizes the delete command in the same manner that
the insert command is already conditionalized.

When failing to start a virtual network, we have to cleanup,
tearing down any iptables rules. If the iptables rules were
not present yet though, this raises an error, which squashes
the original error we were handling.

* src/network/bridge_driver.c: When failing to start a virtual
  network, don't squash the original error in cleanup

The network address was being set to 192.168.122.0 instead
of 192.168.122.0/24. Fix this by removing the unneccessary
'network' field from virNetworkDef and just pass the
network address and netmask into the iptables APIs directly.

* src/conf/network_conf.h, src/conf/network_conf.c: Remove
  the 'network' field from virNEtworkDef.
* src/network/bridge_driver.c: Update for iptables API changes
* src/util/iptables.c, src/util/iptables.h: Require the
  network address + netmask pair to be passed in

Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present

* src/conf/network_conf.c, src/conf/network_conf.h,
  src/network/bridge_driver.c: Convert to use virSocketAddr
  in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
  src/util/dnsmasq.c, src/util/dnsmasq.h,
  src/util/iptables.c, src/util/iptables.h: Convert to
  take a virSocketAddr instead of char * for any IP
  address parameters
* src/util/network.h: Add macros to determine if an address
  is set, and what address family is set.

The virSocketParse method was not doing any error reporting
which meant the true cause of the problem was lost. Remove
all error reporting from callers, and push it into virSocketParse

* src/util/network.c: Add error reporting to virSocketParse
* src/conf/domain_conf.c, src/conf/network_conf.c,
  src/network/bridge_driver.c: Remove error reporting in
  callers of virSocketParse

The virSocketParseAddr function was accepting any AF_* constant
and using that to set the ai_flags field in struct addrinfo.
This is invalid, since address families must go in the ai_family
field of the struct.

* src/util/network.c: Fix handling of address family
* src/conf/network_conf.c, src/network/bridge_driver.c: Pass
  AF_UNSPEC instead of relying on it being 0.

Some operations on socket addresses need to know the length of
the sockaddr struct for the particular address family. This
info was being discarded when passing around virSocketAddr
instances. Turn it from a union into a struct containing
union+socklen_t fields, so length is always kept around.

* src/util/network.h: Add socklen_t field to virSocketAddr
* src/util/network.c, src/network/bridge_driver.c,
  src/conf/domain_conf.c: Update to take account of new
  struct definition.

For static-only DHCP, i.e. with no <range> but at least one <host>
element within <dhcp> element, we have to add "--dhcp-range IP,static"
option to dnsmasq to actually enable the service. Without this option,
dnsmasq will not respond to DHCP requests.

--dhcp-no-override description from dnsmasq man page:

      Disable  re-use  of  the  DHCP servername and filename fields as
      extra option space. If it can, dnsmasq moves the boot server and
      filename  information  (from  dhcp-boot)  out of their dedicated
      fields into DHCP options. This make extra space available in the
      DHCP  packet  for options but can, rarely, confuse old or broken
      clients. This flag forces "simple and safe" behaviour  to  avoid
      problems in such a case.

It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.

We add --dhcp-lease-max=xxx argument when network->def->nranges > 0 but
we only allocate space for in the opposite case :-) I guess we are lucky
enough to miscount somewhere else so that we actually allocate more
space than we need since no-one has hit this bug so far.

This patch attempts to take advantage of a newly added netfilter
module to correct for a problem with some guest DHCP client
implementations when used in conjunction with a DHCP server run on the
host systems with packet checksum offloading enabled.

The problem is that, when the guest uses a RAW socket to read the DHCP
response packets, the checksum hasn't yet been fixed by the IP stack,
so it is incorrect.

The fix implemented here is to add a rule to the POSTROUTING chain of
the mangle table in iptables that fixes up the checksum for packets on
the virtual network's bridge that are destined for the bootpc port (ie
"dhcpc", ie port 68) port on the guest.

Only very new versions of iptables will have this support (it will be
in the next upstream release), so a failure to add this rule only
results in a warning message. The iptables patch is here:

  http://patchwork.ozlabs.org/patch/58525/

A corresponding kernel module patch is also required (the backend of
the iptables patch) and that will be in the next release of the
kernel.

* src/network/bridge_driver.c (networkDefine): Kill dead store.

* src/network/bridge_driver.c
(networkAddMasqueradingIptablesRules): Fix spelling and grammar.

IPtables will seek to preserve the source port unchanged when
doing masquerading, if possible. NFS has a pseudo-security
option where it checks for the source port <= 1023 before
allowing a mount request. If an admin has used this to make the
host OS trusted for mounts, the default iptables behaviour will
potentially allow NAT'd guests access too. This needs to be
stopped.

With this change, the iptables -t nat -L -n -v rules for the
default network will be

Chain POSTROUTING (policy ACCEPT 95 packets, 9163 bytes)
 pkts bytes target     prot opt in     out     source               destination
   14   840 MASQUERADE  tcp  --  *      *       192.168.122.0/24    !192.168.122.0/24    masq ports: 1024-65535
   75  5752 MASQUERADE  udp  --  *      *       192.168.122.0/24    !192.168.122.0/24    masq ports: 1024-65535
    0     0 MASQUERADE  all  --  *      *       192.168.122.0/24    !192.168.122.0/24

* src/network/bridge_driver.c: Add masquerade rules for TCP
  and UDP protocols
* src/util/iptables.c, src/util/iptables.c: Add source port
  mappings for TCP & UDP protocols when masquerading.

add iptables rules to allow TFTP from the virtual network if <tftp>
element is defined in the network definition.

Fedora bz#580215

* src/network/bridge_driver.c: open UDP port 69 for TFTP traffic if
  tftproot is defined

The network driver is not doing correct checking for
duplicate UUID/name values. This introduces a new method
virNetworkObjIsDuplicate, based on the previously
written virDomainObjIsDuplicate.

* src/conf/network_conf.c, src/conf/network_conf.c,
  src/libvirt_private.syms: Add virNetworkObjIsDuplicate,
* src/network/bridge_driver.c: Call virNetworkObjIsDuplicate
  for checking uniqueness of uuid/names

Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=235961

If using the default virtual network, an easy way to lose guest network
connectivity is to install libvirt inside the VM. The autostarted
default network inside the guest collides with host virtual network
routing. This is a long standing issue that has caused users quite a
bit of pain and confusion.

On network startup, parse /proc/net/route and compare the requested
IP+netmask against host routing destinations: if any matches are found,
refuse to start the network.

v2: Drop sscanf, fix a comment typo, comment that function could use
    libnl instead of /proc

v3: Consider route netmask. Compare binary data rather than convert to
    string.

v4: Return to using sscanf, drop inet functions in favor of virSocket,
    parsing safety checks. Don't make parse failures fatal, in case
    expected format changes.

v5: Try and continue if we receive unexpected. Delimit parsed lines to
    prevent scanning past newline

* src/xen/xend_internal.c (xenDaemonDomainDefineXML): Remove \n.
* src/network/bridge_driver.c (networkAddMasqueradingIptablesRules):
Likewise.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

81 patches to gnulib, picks up several new syntax checks.

* .gnulib: Update to latest.
* .x-sc_prohibit_always_true_header_tests: New file.
* bootstrap.conf (gnulib_modules): Add sched.
* src/util/processinfo.c (includes): <sched.h> is now guaranteed.
* src/network/bridge_driver.c (includes): Drop useless
<strings.h>.
* src/openvz/openvz_conf.c (includes): Likewise.
* src/openvz/openvz_driver.c (includes): Likewise.
* src/phyp/phyp_driver.c (includes): Likewise.
* src/qemu/qemu_driver.c (includes): Likewise.
* src/uml/uml_driver.c (includes): Likewise.

use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account

This patch makes libvirtd start the dnsmasq daemon with a
--dhcp-hostsfile option instead of --dhcp-host options for each
'//ip/dhcp/host' entries defined in network xml file.

the dnsmasq host file is stored into /var/lib/libvirt/network

* src/network/bridge_driver.c: define the directory for the hostfiles
  and save/delete them to be used by dnsmasq

Prior to this patch, there was an inconsistent mix between GNU and C99.

For consistency, and potential portability to other compilers, stick
with the C99 vararg macro syntax.

* src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/conf/domain_conf.c (virDomainReportError): Likewise.
* src/conf/domain_event.c (eventReportError): Likewise.
* src/conf/interface_conf.c (virInterfaceReportError): Likewise.
* src/conf/network_conf.c (virNetworkReportError): Likewise.
* src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise.
* src/conf/secret_conf.h (virSecretReportError): Likewise.
* src/conf/storage_conf.h (virStorageReportError): Likewise.
* src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than
  GNU vararg macro syntax.
* src/esx/esx_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_interface_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_network_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_secret_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_storage_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_util.c (ESX_ERROR): Likewise.
* src/esx/esx_vi.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vmx.c (ESX_ERROR): Likewise.
* src/util/hostusb.c (usbReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/util/json.c (virJSONError): Likewise.
* src/util/macvtap.c (ReportError): Likewise.
* src/util/pci.c (pciReportError): Likewise.
* src/util/stats_linux.c (virStatsError): Likewise.
* src/util/util.c (virUtilError): Likewise.
* src/util/xml.c (virXMLError): Likewise.
* src/xen/proxy_internal.c (virProxyError): Use C99 rather than
  GNU vararg macro syntax.
* src/xen/sexpr.c (virSexprError): Likewise.
* src/xen/xen_driver.c (xenUnifiedError): Likewise.
* src/xen/xen_hypervisor.c (virXenError): Likewise.
* src/xen/xen_inotify.c (virXenInotifyError): Likewise.
* src/xen/xend_internal.c (virXendError): Likewise.
* src/xen/xm_internal.c (xenXMError): Likewise.
* src/xen/xs_internal.c (virXenStoreError): Likewise.
* src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/datatypes.c (virLibConnError): Likewise.
* src/interface/netcf_driver.c (interfaceReportError): Likewise.
* src/libvirt.c (virLibStreamError): Likewise.
* src/lxc/lxc_conf.h (lxcError): Likewise.
* src/network/bridge_driver.c (networkReportError): Likewise.
* src/nodeinfo.c (nodeReportError): Likewise.
* src/opennebula/one_conf.h (oneError): Likewise.
* src/openvz/openvz_conf.h (openvzError): Likewise.
* src/phyp/phyp_driver.c (PHYP_ERROR): Likewise.
* src/qemu/qemu_conf.h (qemuReportError): Likewise.
* src/remote/remote_driver.c (errorf): Likewise.
* src/security/security_driver.h (virSecurityReportError): Likewise.
* src/test/test_driver.c (testError): Likewise.
* src/uml/uml_conf.h (umlReportError): Likewise.
* src/vbox/vbox_driver.c (vboxError): Likewise.
* src/vbox/vbox_tmpl.c (vboxError): Likewise.

We were accessing the wrong private data structure, which would
cause a segfault.

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match

It was used for error reporting only.

* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
  src/network/bridge_driver.c src/qemu/qemu_driver.c
  src/uml/uml_driver.c: virFileMakePath returns 0 for success, or the
  value of errno on failure, so error checking should be to test
  if non-zero, not if lower than 0

I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
    VIR_DEBUG
    VIR_DEBUG0
    VIR_ERROR
    VIR_ERROR0
    VIR_INFO
    VIR_WARN
    VIR_WARN0
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

* src/network/bridge_driver.c (networkBuildDnsmasqArgv): Correct
test for NULL *argv.

Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.

There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.

We quickly disabled lokkit support, but never removed it. Let's do
that now.

The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:

  https://bugzilla.redhat.com/227011

* src/util/iptables.c: remove lokkit support

* configure.in: remove --enable-lokkit

* libvirt.spec.in: remove the dirs used only for saving rules for lokkit

* src/Makefile.am: ditto

* src/libvirt_private.syms, src/network/bridge_driver.c,
  src/util/iptables.h: remove references to iptablesSaveRules

This is the expected behaviour, I think - reloading libvirtd should
be a subset of restarting it.

Note, we reload the rules after we've determined which networks
are active (because we only add the rules for active networks)
and before we start autostart networks (to avoid re-adding the
rules).

* src/network/bridge_driver.c: reload iptables rules on startup