* Add nmdm type device to domain format documnetation
* Add a section about nmdm console usage to the bhyve driver
  documentation

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1019926
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868673Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

So far, qemuxml2xml test was only able to check if the result matches
the original or the appropriate XML in qemuxml2xmloutdata regardless on
flags used to format the XML. Since the result can be different
depending on VIR_DOMAIN_XML_INACTIVE flag being used or not, this patch
adds support for qemuxml2xmlout-%s-active.xml and
qemuxml2xmlout-%s-inactive.xml output files. If the file specific to the
flag used exists, it is used in preference to the generic
qemuxml2xmlout-%s.xml file when reading the expected output.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch implements formating and parsing code for the backing store
schema defined and documented by the previous patch.

This patch does not aim at providing full persistent storage of disk
backing chains yet. The formatter is supposed to provide the backing
chain detected when starting a domain and thus it is not formatted into
an inactive domain XML. The parser is implemented mainly for the purpose
of testing the XML generated by the formatter and thus it does not
distinguish between no backingStore element and an empty backingStore
element. This will have to change once we fully implement support for
user-supplied backing chains.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The XML for quite a longish backing chain is shown below:

  <disk type='network' device='disk'>
    <driver name='qemu' type='qcow2'/>
    <source protocol='nbd' name='bar'>
      <host transport='unix' socket='/var/run/nbdsock'/>
    </source>
    <backingStore type='block' index='1'>
      <format type='qcow2'/>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <backingStore type='file' index='2'>
        <format type='qcow2'/>
        <source file='/tmp/image2.qcow'/>
        <backingStore type='file' index='3'>
          <format type='qcow2'/>
          <source file='/tmp/image3.qcow'/>
          <backingStore type='file' index='4'>
            <format type='qcow2'/>
            <source file='/tmp/image4.qcow'/>
            <backingStore type='file' index='5'>
              <format type='qcow2'/>
              <source file='/tmp/image5.qcow'/>
              <backingStore type='file' index='6'>
                <format type='raw'/>
                <source file='/tmp/Fedora-17-x86_64-Live-KDE.iso'/>
                <backingStore/>
              </backingStore>
            </backingStore>
          </backingStore>
        </backingStore>
      </backingStore>
    </backingStore>
    <target dev='vdb' bus='virtio'/>
  </disk>

Various disk types and formats can be mixed in one chain. The
<backingStore/> empty element marks the end of the backing chain and it
is there mostly for future support of parsing the chain provided by a
user. If it's missing, we are supposed to probe for the rest of the
chain ourselves, otherwise complete chain was provided by the user. The
index attributes of backingStore elements can be used to unambiguously
identify a specific part of the image chain.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Recent discussions around naming of 'pci' vs 'pci.0' for PPC
made me go back and look at the PPC emulator in every historical
version of QEMU since 1.0. The results were worse than I imagined.
This patch adds the logic required to make libvirt work with PPC
correctly with naming variations across all versions & machine
types.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.

Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.

This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.

To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.

Don't remove detected metadata about directory based storage volumes.

Switch over to storing of the backing chain as a recursive
virStorageSource structure.

This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.

To conform with the naming of the planned XML output rename the metadata
variable name.

s/backingMeta/backingStore/g

Remove the now unused pieces of the structure.

Replace the old structure with the new one. This change is a trivial
name change operation (along with change of the freeing function).

Add the required fields that are missing from the new structure that
will allow us to switch the storage file metadata code entirely to the
new structure.

Add "relPath" and "relDir" and the raw backing store name. Also allow
creating linked lists of virStorageSourcePtrs to express backing chains.

Add a free function as some parts of the code will allocate the
structure.

Remove the obsolete field replaced by data in "path".

The testsuite requires tweaking as the name of the backing file is now
stored one layer deeper in the backing chain linked list.

As a temporary step to allow killing of the "backingStore" field of
struct virStorageFileMetadata the recursive metadata retrieval function
will be converted not to use the field in the lookup process.

As for the previous patch, this change is needed to achieve
compatibility with all the existing code, where we expect a fully
qualified path of local files to be present.

To allow future change of virStorageFileMetadata to virStorageSource we
need to store a full path in the "path" variable as rest of the code
expects it to be a full path. Rename the "path" field to "relPath" to
keep tracking the info but allowing a real "path" field.

Avoid passing lot of arguments into guts of metadata retrieval to fill
the actual structure. Temporarily fill the structure before passing it
down to the actual metadata extractor.

This will later help the inversion of the steps taken to extract the
metadata so that this function can be fully converted to
virStorageSource as the data struct.

This patch also fixes regression when starting a gluster storage pool
where the volumes don't have local representation so that the
canonicalization of the volume's file name failed. Broken by commit
79f11b35

Move the code checking the presence of the backing file to the recursive
worker function instead of the metadata parser. The recursive worker
will later be changed to parse more than just local files and this
change will help the separation.

As we already pass the whole structure down the call path there's no
need to return some stuff in a separate argument. Remove the argument
and tweak callers to avoid breaking semantics.

virStorageFileGetMetadataFromBuf will be refactored later along with the
storage driver.

Don't use the backingStoreRaw as a indication of broken chains. Fill it
always and tweak the broken image chain detector to avoid changing the
semantics.

The new semantics to detect a broken chain is the presence of string in
backingStoreRaw but the lack of the backing chain metadata structure in
the chain.

Now that the raw backing store name is always filled there's no need to
pass the raw name variable separately to fill in case the backing is not
a file. Tweak the function so that it can handle a NULL in that case.

The function isn't used in any other source file. Move it so that it
doesn't need a declaration.

Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1088748

The hotplugged vcpus could fail to show up in the guest if
they were added during boot, see:
https://bugzilla.redhat.com/show_bug.cgi?id=807508

Also change arbitrary to arbitrarily.

The live change of vcpus was not reflected in the domain status
xml and it got lost during libvirtd restart.

https://bugzilla.redhat.com/show_bug.cgi?id=1088703

- do not lose new definition for an active domain
- do not leak oldDef
- do not set dom->id if virDomainSaveConfig() fails
- do not call virObjectUnlock(vm) if vm is NULL

Currently, libvirt is using legacy USB controller as default. There
are problems with VGA which can't work correctly with USB Keyboard and
USB Mouse.

While providing -nodefaults, ppc64 should be specifying the usb
controller explicitly in place of using the legacy
controller(-usb). Qemu spapr initialization code when sees "-usb" adds a
USB Keyboard and USB Mouse by default. And libvirt has added a USB
keyboard and USB mouse.

A recent fix in the in qemu VGA code uncoverd this problem, which
resulted in addition of extra keyboard and mouse to the qemu machine.

This patch is to set pci-ohci as USB default controller.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

Changes:
error: invalid argument: vcpu number out of range 2 > 2
to slightly less confusing:
error: invalid argument: vcpu number out of range 2 > 1

Before, it only returned -1 on failure to shrink the array.
Since the switch to VIR_DELETE_ELEMENT in commit 2133441a,
it returns either 0 or 0.

Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.

Introduced by commit 0df1a790.

This makes virDomainLookupVcpuPin redundant.

https://bugzilla.redhat.com/show_bug.cgi?id=1088165

Fix minor typos in source comments
Signed-off-by: NEric Blake <eblake@redhat.com>

Among other patches, Natanael Copa contributed a fix for
pyshmem_available when using musl libc that directly affects
libvirt.

* .gnulib: Update to latest, in part for musl libc compat.
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement bhyveDomainCreateXML function.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

When the default was changed from kvm to vfio, the documentation for
hostdev and interface was changed, but the documentation in <network>
was forgotten.

Also document when the default was changed from "always kvm" to "vfio
if available, else kvm" (1.0.5).

The version check is for >=1.3.0, but ComputeCmdFlags
is only called for QEMU <1.2.0.

QEMU only supports it on x86, but we've been assuming it for
all QEMUs when doing QMP capability detection.

https://bugzilla.redhat.com/show_bug.cgi?id=1066145

While running virstoragetest, valgrind pointed out the following
memory leak:

==8142== 2 bytes in 1 blocks are definitely lost in loss record 1 of 92
==8142==    at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==8142==    by 0x4E7B53E: mdir_name (dirname-lgpl.c:78)
==8142==    by 0x4CBE2B0: virStorageFileGetMetadataInternal (virstoragefile.c:595)
==8142==    by 0x4CBE651: virStorageFileGetMetadataFromFDInternal (virstoragefile.c:1086)
==8142==    by 0x4CBEEB4: virStorageFileGetMetadataRecurse (virstoragefile.c:1175)
==8142==    by 0x4CBF1DE: virStorageFileGetMetadata (virstoragefile.c:1270)
==8142==    by 0x4028AD: testStorageChain (virstoragetest.c:275)
==8142==    by 0x407B91: virtTestRun (testutils.c:201)
==8142==    by 0x4039D7: mymain (virstoragetest.c:534)
==8142==    by 0x40830D: virtTestMain (testutils.c:789)
==8142==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)

...62 times

Fix a locking problem by leaving the function via the cleanup label.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Commit id '18642d10' caused a virt-test regression for NFS backend
storage error path checks when running the command:

    'virsh find-storage-pool-sources-as netfs Unknown  '

when the host did not have Gluster installed. Prior to the commit,
the test would fail with the error:

    error: internal error: Child process (/usr/sbin/showmount --no-headers
    --exports Unknown) unexpected exit status 1: clnt_create: RPC: Unknown host

After the commit, the error would be ignored, the call would succeed,
and an empty list of pool sources returned. This was tucked into the
commit message as an expected outcome.

When the target host does not have a GLUSTER_CLI this is a regression
over the previous release. Furthermore, even if Gluster CLI was present,
but had a failure to get devices, the API would return a failure even if
the NFS backend had found devices.

Modify the logic to return failure when the NFS backend check fails and
there's no GLUSTER_CLI or when both backend checks fail.

If either returns success and GLUSTER_CLI is defined, then fetch and return
a list of source devices even if it's empty