Use correct package names too as they differ.

Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590

https://bugzilla.redhat.com/show_bug.cgi?id=1195660

There's been a bug report appearing on the qemu-devel list, that
libvirt is unable to pass spaces in disk serial number [1]. Not only
our RNG schema forbids that, the code is not prepared either. However,
with a bit of escaping (if needed) we can allow spaces there.

1: https://lists.gnu.org/archive/html/qemu-devel/2015-02/msg04041.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

Last commit unconditionally included a linux-specific header.

Do not do that.

Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Well, the parallelsConnectOpen() joins several sub-driver openings
into one big if condition. If any of sub-driver fails to open, the
whole API finishes immediately. The problem is, sub-drivers may have
left some memory allocated. Fortunately, we have a free function for
that: parallelsConnectClose(). This is, however, not prepared for
partially allocated driver structure. So, prepare the free function
for it and call it at the right place, in the if body.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177219

According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119

When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.

While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533Signed-off-by: NShanzhi Yu <shyu@redhat.com>

Inactive domains can still be stuck in a job or other problems. Add a
way to detect it.

Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:

$ virsh domcontrol domain
occupied (1424343406.150s)

The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:

$ virsh domcontrol domain
error: internal (locking) error

It's returning virNetworkObjPtr after all. And it matches the
pattern laid out by domain_conf.h.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It's returning virNetworkObjPtr after all. And it matches the
pattern laid out by domain_conf.h.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

All of our vir*Free() functions should accept NULL, even though
that there's no way of actually passing NULL with current code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is probably a copy-paste error from virDomainObj*
counterpart.  But when speaking of virNetworkObj we should use
variable @nets for an array of networks, rather than @doms. It's
just confusing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Moreover, there are two points within the function, where we're
missing 'goto cleanup'. Fix this too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Okay, this is mainly for educational purposes since is called
from single point only with all the possible locks held. So
there's no way for other thread to hop in and do something wrong.
Nevertheless, we should not give bad example.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:

  no network with matching uuid '$uuid' ($name)

Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1197600

So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop.  This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port.  This
results in failure while starting a guest.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143832Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We have two different places that needs to be updated while touching
code for allocation spice ports.  Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

Acked-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

In commit edd1295e I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.

Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468

Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information.  That was
caused by rewriting the patch since first draft.

Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc).  In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=921426

Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.

Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd.  Also missing any backend is zfs.

The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.

For example:

$  virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources

$ virsh find-storage-pool-sources-as iscsi 192.168.122.1
<sources>
  <source>
    <host name='192.168.122.1' port='3260'/>
    <device path='iqn.2013-12.com.example:iscsi-chap-lclpool'/>
  </source>
</sources>

https://bugzilla.redhat.com/show_bug.cgi?id=1070695

Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.

https://bugzilla.redhat.com/show_bug.cgi?id=1181062

According to the formatstorage.html description for <source> element
and "format" attribute: "All drivers are required to have a default
value for this, so it is optional."

As it turns out the disk backend did not choose a default value, so I
added a default of "msdos" if the source type is "unknown" as well as
updating the storage.html backend disk volume driver documentation to
indicate the default format is dos.

https://bugzilla.redhat.com/show_bug.cgi?id=1142631

This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.

While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.

Without the patch, the domblklist will list the same Target twice:

$ virsh domblklist $dom
Target     Source
------------------------------------------------
sda        /var/lib/libvirt/images/file.qcow2
sda        /var/lib/libvirt/images/file.img

Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.

Fortunately, hotplug disallows adding a "third" sda value:

$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists

$

BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'

$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device

$

Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:

$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'

$

Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.

A disk using a source pool is listed as having a source '-' in domblklist
because it doesn't check the right XML syntax to find the source.

Add a check for "./source/volume" which is where the "path" (of sorts)
to the volume name is described.

The total NUMA memory consists of the sum of individual NUMA node memory
amounts.

NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.

Forbid use of the API in case NUMA is specified.

The messages for currentMemory and memory were swapped.