- 19 1月, 2011 1 次提交
-
-
由 Justin Clift 提交于
-
- 18 1月, 2011 5 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=620363 When using -incoming stdio or -incoming exec:, qemu keeps the stdin fd open long after the migration is complete. Not to mention that exec:cat is horribly inefficient, by doubling the I/O and going through a popen interface in qemu. The new -incoming fd: of qemu 0.12.0 closes the fd after using it, and allows us to bypass an intermediary cat process for less I/O. * src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter. * src/qemu/qemu_command.c (qemuBuildCommandLine): Support migration via fd: when possible. Consolidate migration handling into one spot, now that it is more complex. * src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file. * tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Support for this is included in qemu and seabios from upstream git.
-
由 Jiri Denemark 提交于
Currently, boot order can be specified per device class but there is no way to specify exact disk/NIC device to boot from. This patch adds <boot order='N'/> element which can be used inside <disk/> and <interface/>. This is incompatible with the older os/boot element. Since not all hypervisors support per-device boot specification, new deviceboot flag is included in capabilities XML for hypervisors which understand the new boot element. Presence of the flag allows (but doesn't require) users to use the new style boot order specification.
-
由 Jiri Denemark 提交于
-
- 17 1月, 2011 3 次提交
-
-
由 Eric Blake 提交于
* tools/libvirt-guests.init.in: Rename... * tools/libvirt-guests.init.sh: ...so that xgettext's language detection via suffix will work. * po/POTFILES.in: Update all references. * tools/Makefile.am (EXTRA_DIST, libvirt-guests.init): Likewise.
-
由 Laurent Léonard 提交于
* tools/libvirt-guests.init.sh: Use only POSIX shell features, which includes using gettext.sh for translation rather than $"". * tools/Makefile.am (libvirt-guests.init): Supply a few more substitutions. * po/POTFILES.in: Mark that libvirt-guests.init needs translation. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Daniel Veillard 提交于
-
- 16 1月, 2011 2 次提交
-
-
由 Matthias Bolte 提交于
Before the security driver was refactored in d6623003 seclabeltest and secaatest were basically the same. seclabeltest was meant for SELinux and secaatest for AppArmor. Both tests exited early when the specific security driver backend wasn't enabled. With the new security manager trying to initialize a disabled security driver backend is an error that can't be distinguished from other errors anymore. Therefore, the updated seclabeltest just asks for the first available backend as this will always work even with SELinux and AppArmor backend being disabled due to the new Nop backend. Remove the obsolete secaatest and compile and run the seclabeltest unconditional. This fixes make check on systems that support AppArmor.
-
由 Matthias Bolte 提交于
There is no ENABLE_SECDRIVER_APPARMOR.
-
- 15 1月, 2011 11 次提交
-
-
由 Nikunj A. Dadhania 提交于
Display or set unlimited values for memory parameters. Unlimited is represented by INT64_MAX in memory cgroup. Signed-off-by: NNikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Reported-by: NJustin Clift <jclift@redhat.com>
-
由 Eric Blake 提交于
* .gnulib: Update, for sc_prohibit_strcmp fix. * cfg.mk: Adjust copyright; the only FSF portions come from when this file was copied from coreutils. (sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp. * .x-sc_prohibit_strcmp: Delete, now that rule is smarter. * .x-sc_prohibit_strncmp: Likewise. * Makefile.am (syntax_check_exceptions): Track deletion.
-
由 Eric Blake 提交于
virLibConnError already includes __FUNCTION__ in its output, so we were redundant. Furthermore, clang warns that __FUNCTION__ is not a string literal (at least __FUNCTION__ will never contain %, so it was not a security risk). * src/datatypes.c: Replace __FUNCTION__ with a descriptive string.
-
由 Laine Stump 提交于
This is in response to a request in: https://bugzilla.redhat.com/show_bug.cgi?id=665293 In short, under heavy load, it's possible for qemu's networking to lock up due to the tap device's default 1MB sndbuf being inadequate. adding "sndbuf=0" to the qemu commandline -netdevice option will alleviate this problem (sndbuf=0 actually sets it to 0xffffffff). Because we must be able to explicitly specify "0" as a value, the standard practice of "0 means not specified" won't work here. Instead, virDomainNetDef also has a sndbuf_specified, which defaults to 0, but is set to 1 if some value was given. The sndbuf value is put inside a <tune> element of each <interface> in the domain. The intent is that further tunable settings will also be placed inside this element. <interface type='network'> ... <tune> <sndbuf>0</sndbuf> ... </tune> </interface>
-
由 Laine Stump 提交于
This patch is in response to https://bugzilla.redhat.com/show_bug.cgi?id=643050 The existing libvirt support for the vhost-net backend to the virtio network driver happens automatically - if the vhost-net device is available, it is always enabled, otherwise the standard userland virtio backend is used. This patch makes it possible to force whether or not vhost-net is used with a bit of XML. Adding a <driver> element to the interface XML, eg: <interface type="network"> <model type="virtio"/> <driver name="vhost"/> will force use of vhost-net (if it's not available, the domain will fail to start). if driver name="qemu", vhost-net will not be used even if it is available. If there is no <driver name='xxx'/> in the config, libvirt will revert to the pre-existing automatic behavior - use vhost-net if it's available, and userland backend if vhost-net isn't available.
-
由 Marc-André Lureau 提交于
We try to use that command first when setting a VNC/SPICE password. If that doesn't work we fallback to the legacy VNC only password Allow an expiry time to be set, if that doesn't work, throw an error if they try to use SPICE. Change since v1: - moved qemuInitGraphicsPasswords to qemu_hotplug, renamed to qemuDomainChangeGraphicsPasswords. - updated what looks like a typo (that appears to work anyway) in initial patch from Daniel: - ret = qemuInitGraphicsPasswords(driver, vm, - VIR_DOMAIN_GRAPHICS_TYPE_SPICE, - &vm->def->graphics[0]->data.vnc.auth, - driver->vncPassword); + ret = qemuInitGraphicsPasswords(driver, vm, + VIR_DOMAIN_GRAPHICS_TYPE_SPICE, + &vm->def->graphics[0]->data.spice.auth, + driver->spicePassword); Based on patch by Daniel P. Berrange <berrange@redhat.com>.
-
由 Marc-André Lureau 提交于
-
由 Jim Fehlig 提交于
I broke 'make check' with commit 04197350 by unconditionally emitting 'hap=' in xen xm driver. Only emit 'hap=' if xendConfigVersion >= 3. I've tested sending 'hap=' to a Xen 3.2 machine without support for hap setting and verified that xend silently drops the unrecognized setting.
-
由 Eric Blake 提交于
* src/conf/domain_conf.h (virDomainChrDeviceType): Drop monitor. * src/conf/domain_conf.c (virDomainChrDevice) (virDomainChrDefParseTargetXML, virDomainChrDefFormat): Drop monitor support. * src/qemu/qemu_command.h (qemuBuildCommandLine): Alter signature. * src/qemu/qemu_monitor.h (qemuMonitorOpen): Likewise. * src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Change type of monConfig. * src/qemu/qemu_domain.c (qemuDomainObjPrivateFree) (qemuDomainObjPrivateXMLFormat, qemuDomainObjPrivateXMLParse): Adjust to type change. * src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise. * src/qemu/qemu_driver.c (qemuPrepareMonitorChr) (qemudStartVMDaemon, qemuDomainXMLToNative, qemuConnectMonitor) (qemudShutdownVMDaemon): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise. * src/qemu/qemu_monitor.c (qemuMonitorOpen): Likewise. * tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Likewise.
-
由 Eric Blake 提交于
This opens up the possibility of reusing the smaller ChrSourceDef for both qemu monitor and a passthrough smartcard device. * src/conf/domain_conf.h (_virDomainChrDef): Factor host details... (_virDomainChrSourceDef): ...into new struct. (virDomainChrSourceDefFree): New prototype. * src/conf/domain_conf.c (virDomainChrDefFree) (virDomainChrDefParseXML, virDomainChrDefFormat): Split... (virDomainChrSourceDefClear, virDomainChrSourceDefFree) (virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat): ...into new functions. (virDomainChrDefParseTargetXML): Update clients to reflect type split. * src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel) (virVMXFormatSerial, virVMXFormatParallel): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise. * src/xen/xend_internal.c (xenDaemonParseSxprChar) (xenDaemonFormatSxprChr): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial) (vboxAttachParallel): Likewise. * src/security/security_dac.c (virSecurityDACSetChardevLabel) (virSecurityDACSetChardevCallback) (virSecurityDACRestoreChardevLabel) (virSecurityDACRestoreChardevCallback): Likewise. * src/security/security_selinux.c (SELinuxSetSecurityChardevLabel) (SELinuxSetSecurityChardevCallback) (SELinuxRestoreSecurityChardevLabel) (SELinuxSetSecurityChardevCallback): Likewise. * src/security/virt-aa-helper.c (get_files): Likewise. * src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole): Likewise. * src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise. * src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY) (umlDomainOpenConsole): Likewise. * src/qemu/qemu_command.c (qemuBuildChrChardevStr) (qemuBuildChrArgStr, qemuBuildCommandLine) (qemuParseCommandLineChr): Likewise. * src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat) (qemuDomainObjPrivateXMLParse): Likewise. * src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise. * src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor) (qemudFindCharDevicePTYs, qemuPrepareChardevDevice) (qemuPrepareMonitorChr, qemudShutdownVMDaemon) (qemuDomainOpenConsole): Likewise. * src/qemu/qemu_command.h (qemuBuildChrChardevStr) (qemuBuildChrArgStr): Delete, now that they are static. * src/libvirt_private.syms (domain_conf.h): New exports. * cfg.mk (useless_free_options): Update list. * tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update tests.
-
由 Jiri Denemark 提交于
-
- 14 1月, 2011 9 次提交
-
-
由 Eric Blake 提交于
* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New prototype. * src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs) Rename and split... (qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it easier to add and test device-specific checks. (qemuCapsExtractVersionInfo): Update caller. * tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of device-related flags. (mymain): Update expected flags. * tests/qemuhelpdata/qemu-0.12.1-device: New file. * tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file. * tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file. * tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.
-
由 Eric Blake 提交于
It was awkward having only int conversion in the virStrToLong family, but only long conversion in the virXPath family. Make both families support both types. * src/util/util.h (virStrToLong_l, virStrToLong_ul): New prototypes. * src/util/xml.h (virXPathInt, virXPathUInt): Likewise. * src/util/util.c (virStrToLong_l, virStrToLong_ul): New functions. * src/util/xml.c (virXPathInt, virXPathUInt): Likewise. * src/libvirt_private.syms (util.h, xml.h): Export them.
-
由 Justin Clift 提交于
Addresses BZ # 622534: https://bugzilla.redhat.com/show_bug.cgi?id=622534
-
由 Eric Blake 提交于
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes) (qemuCapsProbeCPUModels, qemuCapsParsePCIDeviceStrs) (qemuCapsExtractVersionInfo): Use virCommand rather than virExec.
-
由 Justin Clift 提交于
-
由 Jim Fehlig 提交于
Add HAP feature to schema and documentation.
-
由 Jim Fehlig 提交于
xen-unstable c/s 16931 introduced a per-domain setting for hvm guests to enable/disable hardware assisted paging. If disabled, software techniques such as shadow page tables are used. If enabled, and the feature exists in underlying hardware, hardware support for paging is used. Xen does not provide a mechanism to discover the HAP capability, so we advertise its availability for hvm guests on Xen >= 3.3.
-
由 Jim Fehlig 提交于
xen-unstable c/s 16931 introduced a per-domain setting for hvm guests to enable/disable hardware assisted paging. If disabled, software techniques such as shadow page tables are used. If enabled, and the feature exists in underlying hardware, hardware support for paging is used. This provides implementation for mapping HAP setting to/from domxml/native formats in xen drivers.
-
由 Jim Fehlig 提交于
Extend the virDomainFeature enumeration to include HAP (hardware assisted paging) feature. Hardware features such as Extended Page Table and Nested Page Table augment hypervisor software techniques such as shadow page table. Adding HAP to the virDomainFeature enumeration allows users to select between hardware and software memory management mechanisms for their guests.
-
- 13 1月, 2011 9 次提交
-
-
由 Eric Blake 提交于
Commit 870dba07 (Mar 2008) added builddir/src to PATH to pick up virsh. Later, virsh was moved to tools; commit db68d6b1 (Oct 2009) noticed this, but only added the new location rather than deleting the old location. * tests/Makefile.am (path_add): Drop now-useless directory. Suggested by Daniel P. Berrange.
-
由 Eric Blake 提交于
Without this patch, at least tests/daemon-conf (which sticks $builddir/src in the PATH) tries to execute the directory $builddir/src/qemu rather than a real qemu binary. * src/util/util.h (virFileExists): Adjust prototype. (virFileIsExecutable): New prototype. * src/util/util.c (virFindFileInPath): Reject non-executables and directories. Avoid huge stack allocation. (virFileExists): Use lighter-weight syscall. (virFileIsExecutable): New function. * src/libvirt_private.syms (util.h): Export new function.
-
由 Daniel Veillard 提交于
-
由 Eric Blake 提交于
* bootstrap.conf (gnulib_modules): Add chown.
-
由 Matthias Bolte 提交于
-
由 Justin Clift 提交于
-
由 Wen Congyang 提交于
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
-
由 Wen Congyang 提交于
When we do peer2peer migration, the dest uri is an address of the target host as seen from the source machine. So we must specify the ip or hostname of target host in dest uri. If we do not specify it, report an error to the user. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
-
由 Osier Yang 提交于
If the emulator doesn't support SDL graphic, we should reject the use of SDL graphic xml with error messages, but not ignore it silently, and pretend things are fine. "-sdl" flag was exposed explicitly by qemu since 0.10.0, more detail: http://www.redhat.com/archives/libvir-list/2011-January/msg00442.html And we already have capability flag "QEMUD_CMD_FLAG_0_10", which could be used to prevent the patch affecting the older versions of QEMU. * src/qemu/qemu_command.c
-