Time values were uninitialized if the connection wasn't usable.

Found by coverity:
Error: SIZEOF_MISMATCH (CWE-569):
    libvirt-0.10.2/tools/virsh-domain.c:4754: suspicious_sizeof: Passing
    argument "8UL /* sizeof (cpumap) */" to function
    "_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
    then casting the return value to "unsigned char *" is suspicious.

Error: SIZEOF_MISMATCH (CWE-569):
    libvirt-0.10.2/tools/virsh-domain.c:4942: suspicious_sizeof: Passing
    argument "8UL /* sizeof (cpumap) */" to function
    "_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
    then casting the return value to "unsigned char *" is suspicious.

* tools/virsh.c: Add send-process-signal
* tools/virsh.pod: Document new command
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The 3 options accept 0, and merely checking for non-zero values
would cause wrong results.

Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.

The error messages did not correspond to the attributes they printed.

Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable.  This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.

It's exposed under domfstrim command. Although the API
doesn't support specifying mount point yet, expose it
anyway.

When the value of memspec was empty taking of a snapshot failed without
reporting an error.

Now that we can filter on this information, we should also make
it easy to get at.

* tools/virsh-snapshot.c (cmdSnapshotInfo): Add another output
row, and switch to XPath queries rather than strstr.

Snapshot filtering based on types is useful enough to add
back-compat support into virsh.  It is also rather easy - all
versions of libvirt that don't understand the new filter flags
already gave us sufficient information in a single XML field
to reconstruct all the information we need (that is, it isn't
until libvirt 1.0.1 that we have more interesting types of
snapshots, such as offline external).

* tools/virsh-snapshot.c (vshSnapshotFilter): New function.
(vshSnapshotListCollect): Add fallback support.

As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties.  This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.

* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.

This reverts commits 5f63a5cb
and ff86b0c9.  After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion.  Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=876868

Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

If the domain can't be looked up, name is used unitialized after the
cleanup label.

Found by coverity.

We require a file and don't accept standard input:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692322

External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name.  This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external.  For an example,

virsh snapshot-create-as $dom --memspec /path/to/file

is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.

* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.

So far, none of the existing callers of vshStringToArray expected
the user to ever pass a literal comma; meanwhile, snapshot parsing
had rolled its own array parser.  Moving the comma escaping into
the common function won't affect any existing callers, and will make
this function reusable for adding memory handling to snapshot parsing.

As a bonus, the testsuite was already testing snapshot parsing, so
the fact that the test still passes means that we are now giving
testsuite exposure to vshStringToArray.

* tools/virsh-snapshot.c (vshParseSnapshotDiskspec): Move ,,
parsing...
* tools/virsh.c (vshStringToArray): ...into common function.
Also, vshStrdup can't fail.

Make it clear that the alternate terms have no difference except
for length of time they were supported.

* tools/virsh.pod (start, shutdown, reboot): More documentation.

https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.

Also, touch up the wording of 'reboot' to be more accurate.

* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.

The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.

This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
 *include/libvirt/libvirt.h.in:
    - add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
    - add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh-domain-monitor.c:
    - add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
 *tools/virsh-snapshot.c:
    - add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh.pod:
    - add docs for --live option added to use
    VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A leftover from copy paste.

https://bugzilla.redhat.com/show_bug.cgi?id=871756

Commit cd1e8d1c assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.

For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program.  We should prefer mkostemp[s] in the first place.

* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.

This resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=862515

which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.

(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)

A synopsis of the problems:

1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.

2) you *can* do a live attach-interface of such a device.

3) you *can* directly edit a domain and put in two devices with
matching mac addresses.

4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.

5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.

Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:

1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.

2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.

This patch does three things:

1) removes the check for duplicate mac address during a persistent
netdev attach.

2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.

Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)

3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.

Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device

* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
  * added new virDomainNetFindIdx function
  * removed now unused virDomainNetIndexByMac and
    virDomainNetRemoveByMac

* src/qemu/qemu_driver.c
  * remove check for duplicate max from qemuDomainAttachDeviceConfig
  * use virDomainNetFindIdx/virDomainNetRemove instead
    of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
  * use virDomainNetFindIdx instead of virDomainIndexByMac
    in qemuDomainUpdateDeviceConfig

* src/qemu/qemu_hotplug.c
  * use virDomainNetFindIdx instead of a homespun loop in
    qemuDomainDetachNetDevice.

* tools/virsh-domain.c: modified detach-interface command as described
    above

* tools/Makefile.am: Fix tab damage in previous patch.

Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273

* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.

The first two hunks fix "Unterminated I<...> sequence" error and the
last one fixes "’=item’ outside of any ’=over’" error.

We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.

https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors.  Clean up a
misleading error message, and add some documentation.

* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.

- Added a new host command nodecpumap
- Added documentation

Example:
$ virsh nodecpumap
CPUs present:  8
CPUs online:   3
CPU map:       y-y-y---
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

'snaps' is used after free()'ed.

https://bugzilla.redhat.com/show_bug.cgi?id=860004

Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.

This patch supports the tuning by adding new param field
"shm_merge_across_nodes".

SIGINT hasn't been blocked, which could lead to losing it somewhere in
virDomainGetBlockJobInfo and not aborting the job.

Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.

Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()