- 20 8月, 2014 2 次提交
-
-
由 Roman Bogorodskiy 提交于
Update bhyveBuildDiskArgStr to support volumes: - Make virBhyveProcessBuildBhyveCmd and virBhyveProcessBuildLoadCmd take virConnectPtr as the first argument instead of bhyveConnPtr as virConnectPtr is needed for virStorageTranslateDiskSourcePool, - Add virStorageTranslateDiskSourcePool call to virBhyveProcessBuildBhyveCmd and virBhyveProcessBuildLoadCmd, - Allow disks of type VIR_STORAGE_TYPE_VOLUME
-
由 Roman Bogorodskiy 提交于
Currently, qemu driver uses qemuTranslateDiskSourcePool() to translate disk volume information. This function is general enough and could be used for other drivers as well, so move it to conf/domain_conf.c along with its helpers. - qemuTranslateDiskSourcePool: move to storage/storage_driver.c and rename to virStorageTranslateDiskSourcePool, - qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c and rename to virStorageAddISCSIPoolSourceHost, - qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c and rename to virStorageTranslateDiskSourcePoolAuth, - Update users of qemuTranslateDiskSourcePool to use a new name.
-
- 19 8月, 2014 10 次提交
-
-
由 Li Yang 提交于
net-undefine doesn't only undefine an inactive network, but also an active network(persistent), it just cannot undefine a transient network. Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
The prototype was along with domain API prototypes instead of network API ones.
-
由 Pradipta Kr. Banerjee 提交于
* tools/virsh.pod (migrate): Add --auto-converge flag Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Martin Kletzander 提交于
In commit 45ad1adb I added a nicer message for tunings that need cgroups when unavailable (unprivileged), but I added this check for I/O tuning of block devices, which doesn't need cgroups, because it is done by QEMU, so let's fix that. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Jianwei Hu 提交于
Added attribute dscp to below supported protocols table in nwfilter docs. IPV4 (ip) TCP/UDP/SCTP (tcp/udp/sctp) ICMP (icmp) IGMP,ESP,AH,UDPLITE,'ALL' (igmp,esp,ah,udplite,all) TCP/UDP/SCTP over IPV6 (tcp-ipv6,udp-ipv6,sctp-ipv6) ICMPV6 (icmpv6) IGMP,ESP,AH,UDPLITE,'ALL' over IPv6 (igmp-ipv6,esp-ipv6,ah-ipv6,udplite-ipv6,all-ipv6) Here is a simple example: [root@localhost ~]# virsh nwfilter-dumpxml myself <filter name='myself' chain='root'> <uuid>7192ef51-cd50-4f14-ad7b-fa5c69ea19e3</uuid> <rule action='accept' direction='in' priority='500'> <ip dscp='1'/> </rule> <rule action='accept' direction='in' priority='500'> <tcp dscp='1'/> </rule> <rule action='accept' direction='in' priority='500'> <tcp-ipv6 dscp='2'/> </rule> <rule action='accept' direction='in' priority='500'> <icmp dscp='55'/> </rule> <rule action='accept' direction='in' priority='500'> <icmpv6 dscp='55'/> </rule> <rule action='accept' direction='in' priority='500'> <udp dscp='3'/> </rule> <rule action='accept' direction='in' priority='500'> <udp-ipv6 dscp='4'/> </rule> <rule action='accept' direction='in' priority='500'> <udplite dscp='5'/> </rule> <rule action='accept' direction='in' priority='500'> <udplite-ipv6 dscp='6'/> </rule> <rule action='accept' direction='in' priority='500'> <esp dscp='7'/> </rule> <rule action='accept' direction='in' priority='500'> <esp-ipv6 dscp='8'/> </rule> <rule action='accept' direction='in' priority='500'> <ah dscp='9'/> </rule> <rule action='accept' direction='in' priority='500'> <ah-ipv6 dscp='10'/> </rule> <rule action='accept' direction='in' priority='500'> <sctp dscp='11'/> </rule> <rule action='accept' direction='in' priority='500'> <sctp-ipv6 dscp='55'/> </rule> <rule action='accept' direction='in' priority='500'> <igmp dscp='55'/> </rule> <rule action='accept' direction='in' priority='500'> <all-ipv6 dscp='55'/> </rule> <rule action='accept' direction='in' priority='500'> <all dscp='55'/> </rule> </filter> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Chunyan Liu 提交于
A possible fix to issue: http://www.redhat.com/archives/libvir-list/2014-August/thread.html#00227 While doing migration on KVM host, found problem sometimes: VM is already running on the target host and disappears from source host, but 'virsh migrate' command line hangs, cannot exit normally. If pressing "ENTER" key, it will exit. The code hangs at tools/virsh-domain.c: cmdMigrate ->vshWatchJob->poll(): poll() is trying to select pipe_fd, which is used to receive message from doMigrate thread. In debugging, found that doMigrate finishes and at the end it does call safewrite() to write the retval ('0' or '1') to pipe_fd, and the write is completed. But cmdMigrate poll() cannot get the event. If pressing "ENTER" key, poll() can get the event and select pipe_fd, then command line can exit. In current code, authentication thread which is called by vshConnect will use stdin, and at the same time, in cmdMigrate main process, poll() is listening to stdin, that probably affect poll() to get pipe_fd event. Better to move authentication before vshWatchJob. With this change, above problem does not exist. Signed-off-by: NChunyan Liu <cyliu@suse.com>
-
由 Jim Fehlig 提交于
XM and XL config are very similar. Disks are specified differently in XL, but the old XM disk config is still supported by XL. XL also supports new config like spice that was never supported by XM. This patch moves all the common parsing and formatting functions to the new file xen_common.c and adapts the XM parser/formatter accordingly. This restructuring paves way for introducing an XL parser/formatter in the future. While moving the code, fixup whitespace, comments, and style issues. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
Wrap formatting code common to xm and xl in xenFormatConfigCommon and export it. Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Kiarie Kahurani 提交于
Wrap parsing code common to xm and xl in xenParseConfigCommon and export it. Signed-off-by: NKiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
src/xenxs contains parsing/formating functions for the various xen config formats, and is better named src/xenconfig. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 18 8月, 2014 9 次提交
-
-
由 Peter Krempa 提交于
Pin existing vcpus rather than existing vcpu pinning infos. This increases the complexity of the lookup, but avoids pinning cpus that are not enabled actually.
-
由 Peter Krempa 提交于
Remove the pinning info when removing to CPU, otherwise when the VM will be started our code will try to pin non-existing vcpus as the definition wasn't updated. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129372
-
由 Peter Krempa 提交于
Tidy up control flow, change boolean argument to use 'bool', improve error message in case the function is used to parse emulator pinning info and avoid a few temp variables that made no sense. Also when the function is called to parse emulator pinning info, there's no need to check the processor ID in that case.
-
由 Peter Krempa 提交于
The check doesn't make much sense as right below it the entries are either checked for duplicity or ignored in some cases. Having this check doesn't actually forbid passing invalid values.
-
由 Peter Krempa 提交于
We set just one affinity of the emulator and the virConnectPtr isn't needed for that function.
-
由 Peter Krempa 提交于
Those two commands work with a single API so cross-link them.
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>
-
由 Erik Skultety 提交于
When editing guest's XML (on QEMU), it was possible to add multiple listen elements into graphics parent element. However QEMU does not support listening on multiple addresses. Configuration is tested for multiple 'listen address' and if positive, an error is raised. https://bugzilla.redhat.com/show_bug.cgi?id=1119212
-
由 Michal Privoznik 提交于
There are some stateless drivers which implement subdrivers (typically vbox and its own network and storage subdrivers). However, as of ba5f3c7c the vbox driver lives in the daemon, not the client library. This means, in order for vbox (or any stateless domain driver) to use its subdrivers, it must register before the general drivers. Later, when the virConnectOpen function goes through the subdrivers, stateless drivers are searched first. If the connection request is aiming at stateless driver, it will be opened. Otherwise the generic subdriver is opened. The other change done in this commit is moving interface module load a bit earlier to match the ordering in case libvirt is built without driver modules. Reported-by: NTaowei Luo <uaedante@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 15 8月, 2014 19 次提交
-
-
由 Peter Krempa 提交于
Patch adding the command forgot to add the man page entry. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1130379
-
由 Taowei 提交于
After this patch, we will have only one common domain driver. So, the rewritten on domain driver is finished in this patch.
-
由 Taowei 提交于
-
由 Taowei 提交于
Four functions are rewrite in this patch, that is: vboxNodeGetInfo vboxNodeGetCellsFreeMemory vboxNodeGetFreeMemory vboxNodeGetFreePages Since these functions has nothing to do with vbox, it can be directly moved to vbox_common.c. So, I merged these things into one patch.
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
-
由 Taowei 提交于
The vboxDomainSnapshotCreateXML integrated the snapshot redefine with this patch: http://www.redhat.com/archives/libvir-list/2014-May/msg00589.html This patch introduced vboxSnapshotRedefine in vboxUniformedAPI to enable the features. This patch replace all version specified APIs to the uniformed api, then, moving the whole implementation to vbox_common.c. As there is only API level changes, the behavior of the function doesn't change. Some old version's defects has brought to the new one. The already known things are: *goto cleanup in a loop without releasing the pointers in the loop. *When function failed after machine unregister, no roll back to recovery it and the virtual machine would disappear.
-
由 Taowei 提交于
-